New design RN4081 Atomizer?

[StephanAdler]

I would like to confirm that totallywicked sells the single hole attys, they dont say so on the site but they arrived today $7 a piece and they r single hole with a fat bridge, huuuge difference in vapor production.

[ACM]

Does anyone have any side-by-side pics they can post of the old vs. the new design of these atomizers?

[dk2]

Sorry I don't have any picks but the new ones are easy to describe and they work amazing tons more vaper

differences:

the new atomizers have only one hole on the side; the old ones have two holes on the side across from each other

the new atomizers have a flat bridge which appears to make more contact accross the filler; the bridge on the old atomizers kind of comes to a point less contact across the filler cartridge

the new atomizers have a serial number on the outside of atomizer on the steel; the old atomizers have no serial number on the outside of the atomizer on the steel

similarities: both have a hole on the top in the brass section that makes contact with the battery

bridge width seems to be the same to my eyes

[danlisi]

I recently got 2of the new ones and they defiantly are better I also got a new style batt with 4 notches in it instead of 2 and it works great!

[cos]

Sorry I don't have any picks but the new ones are easy to describe and they work amazing tons more vaper

differences:

the new atomizers have only one hole on the side; the old ones have two holes on the side across from each other

the new atomizers have a flat bridge which appears to make more contact accross the filler; the bridge on the old atomizers kind of comes to a point less contact across the filler cartridge

the new atomizers have a serial number on the outside of atomizer on the steel; the old atomizers have no serial number on the outside of the atomizer on the steel

similarities: both have a hole on the top in the brass section that makes contact with the battery

bridge width seems to be the same to my eyes

yep thyese 1 hole attys rock. what i notcie besuides sioo much vapor is the smoothness of the hit. does anyone else feel same. i love these things. i bought a bunch from Vapor Kings. i should be all set for a year at least. someone said these attys last a real long time. so far i am still on my first 4081 atty and vaping it at 3.7v and also 6 v and been doing this for 2 months with it. still loaded with vapor and butt kicking TH. of course tyhe TH may be my nic mg but i just love this atty and to be honest it even compares to the Low Resistance attys out there. if they dont equal to it is a very close match so i am sold on these.

[johnny bobcat]

I just got some new 4081s and it is yet a third style, these have the serial number and also have two holes, one slightly larger than the other (not sure why, but its the same on all of them). One interesting change is that the cart is frosted, as opposed to glossy. Also the ceramic cup has changed, there is less space between the walls of it and the coil (which also looks to be shorter and somewhat thicker), and the fiber inside the coil extends through it and down into the nickel foam horizontally, not vertically up into the bridge like other atties. Not a huge difference in performance between these and the one holes, but they are very slightly better. Not much, but still noticeable.

[ACM]

I got my 4081 cartomizers last week from www.aquavaporcig.com and they rock. I was a little concerned at first but after a few refills and a couple of days these things really started performing. Very smooth draw and tons more vapor than the 3 piece setup. I've been using the same one for over a week and all is good.

Mine arrived today. I am eager to test them out. I read somewhere that you should only refill them about 10 times, then toss them. Can anyone confirm this? If it's true, does anyone know why?

[jj2]

there are definitely at least two designs of 4081 atomizers that i have come across,
some have a serial number printed on the outside of the steel tube, one hole and a wider bridge that work much better than the ones with no serial number, two holes, and the skinny bridge

Totally agree with this.

[jj2]

I can confirm this.

The original atty in my SE vaporizer (yeah, they suckered me in) died the other day (it was the two-hole one), so I went in and the guys at the kiosk replaced it for me no problem with a one-hole that looked slightly different (hey, at least they stick to their 12 month warranty!).

This thing now produces an insane amount of vapor compared to my old one that's it's crazy... I'd say it even produces as much as the videos of some of the 510s I've seen.

If anyone knows where I can order the better, one-holed attys, let me know. If I can get my hands on a few of the better ones, maybe I won't feel inclined to upgrade to the 510!

Last order I got form Heavens Gifts had them.

[jj2]

They just came out with a 1 piece cartomizer to fit the 4081. that might be what they're talking about.

So happy to see you!!!!!!!!