Disassemble/Clean Lambo Lavatube 2.0 (with Video!) And I need help for repairs of this (just soldering)

[dayn]

linkin20, is your Lambo Lavatude from L-rider?

[Whoopin]

I'm not sure where it is from but after soldering the fire-button works like a gem :3

I got it from one of the bros here

[Bunnyboy]

Oh yes by the way;

If you all are curious, the LAMBO LT I got has very poor PCB and wire connection. If you can do soldering, go and re-do. Firstly, the wire wasn't soldered but glued on. Secondly, the PCB is really poor quality. Really poor quality. But re-soldering really makes everything better Just my honest opinions on the Lambo.

bro, shld have taken pic of the PCB before you soldered!

[Whoopin]

it totally slipped my mind T___T so sorry!

[fantaza]

how did you managed to open the top part?
Its so tight.

[Whoopin]

use a rubber ended pliers don't use metal end pliers or you will scratch the stainless steel

[badinfluence357]

use a rubber ended pliers don't use metal end pliers or you will scratch the stainless steel

You have no idea how many people you helped by trying to seek help with ur video.. I hope someone out there will help you fix it....I have been looking for someone to change my stripped threads on my lt and ur video just helped me alot now im doing it myself.....thanks for the vid!!! Maybe you can fix it urself get some silver flux apply a small amount on the wire tip with the back part of a needle... hold the wire to the connection point and heat a lil with a pen tourch soldering kit, its like $8.00 on ebay for the pen tourch...you can also find the silver flux on ebay, Good luck!!

[Whoopin]

I managed to fix it already

But now it isn't working again not sure why, but glad the video helped you out

[Manete]

You can only unscrew the Top cap if you have a Lambo (made by L-Rider).
If you own a YJ LT 2.0 (not red button, smaller digits on display)...the top cap seems to be glued. It's completely impossible to open it in order to service it...

[Vaptor]

Glad to see the top screws off. I'm about to mod the PCB but wasn't sure if the top is pressed on. Thanks.