Page 1 of 2 12 LastLast
Results 1 to 10 of 19
Like Tree2Likes

Thread: NEW - Vision eGo Clearomizer V2 at SmokTek.com. Longer wicks!

  1. #1
    Forum Supplier CigarMan's Avatar
    Join Date
    Apr 2011
    Location
    St. Petersburg, Florida
    Posts
    1,154

    Cool NEW - Vision eGo Clearomizer V2 at SmokTek.com. Longer wicks!

    Smoktek Stock update: The new Vision eGo Clearomizer V2! Longer wicks, better vape!
    Available now in 1.8-2.0 ohm Clear. More colors will soon be added. This is simply amazing!


    Vision eGo Transparent Clearomizer V2 for 510/eGo, 1.8-2.0 ohm

    We just got a few in to try, we love them! More colors are on the way as are more resistance options.

    This is the newest Version 2 clearomizer designed for the eGo, with longer wicks for more consistent flow to the coil. It has visible markings showing how much e-Liquid you have inside. The drip tip screws on to seal making it leak and spill resistant. Easy to fill with a squeeze bottle by just tilting and dripping into the side (try not to get liquid in the center, that is for air flow). Fits nicely giving a clean finished look.
    Holds about 1.6 mL of e-Liquid.

    Get More Vapor!

  2. Advertisement
  3. #2
    Forum Supplier CigarMan's Avatar
    Join Date
    Apr 2011
    Location
    St. Petersburg, Florida
    Posts
    1,154

    Default

    OMG! I am in heaven, I vaped a whole tank of Hangen RY4 in an evening with this new clearomizer. That has never happened! It goes through some juice folks, but I think it's because I couldn't put it down.

  4. #3
    Forum Supplier CigarMan's Avatar
    Join Date
    Apr 2011
    Location
    St. Petersburg, Florida
    Posts
    1,154

    Default

    We now have the new V2 Clearomizer in clear, blue, yellow, red and purple with two resistance choices; 2.1-2.4 and 1.8-2.0, stop by and try one!

  5. #4
    Super Member Team ECF (folding@home)
    ECF Veteran
    Supporting Member
    BuGlen's Avatar
    Join Date
    Mar 2012
    Location
    Tampa, Florida
    Posts
    961

    Default

    Hi CigarMan,

    Do you have a physical store in St. Pete, and if so, where?

    I work in St. Pete and I'm using the original Stardust clearos now, but I would love to give a few of these a try. If you have a store, I'll swing by one day after work. Thanks!
    Get Involved! Join CASAA Today!

  6. #5
    Forum Supplier CigarMan's Avatar
    Join Date
    Apr 2011
    Location
    St. Petersburg, Florida
    Posts
    1,154

    Default

    Quote Originally Posted by BuGlen View Post
    Hi CigarMan,

    Do you have a physical store in St. Pete, and if so, where?

    I work in St. Pete and I'm using the original Stardust clearos now, but I would love to give a few of these a try. If you have a store, I'll swing by one day after work. Thanks!
    Howdy neighbor! No we don't yet have a local store but most are happy letting their fingers do the walking and getting their order the next day, seems to work.

  7. #6
    Super Member Team ECF (folding@home)
    ECF Veteran
    Supporting Member
    BuGlen's Avatar
    Join Date
    Mar 2012
    Location
    Tampa, Florida
    Posts
    961

    Default

    Thanks for the information, and one more question.

    I've looked at the VisionCigar website (the original manufacturer of these), and based on the information they have on the site, the V2 didn't introduce the longer wicks. V3 was introduced about 2 weeks ago with the longer wicks and upgraded tank material. Here's the links to that information:

    So, I'm assuming that SmokTek is an OEM partner with VisionCigar, and that the SmokTek branded version V2 is in fact the VisionCigar V3 version. Is my assessment accurate on all points? If not, please correct anything that I have misstated. Thanks!
    Last edited by CigarMan; 05-16-2012 at 01:55 PM. Reason: links to manufacturer site removed
    Get Involved! Join CASAA Today!

  8. #7
    Full Member
    Join Date
    Feb 2012
    Location
    Alabama
    Posts
    22

    Default

    Any chance of getting these in 808 @ 2.8ish ohms?

    Sent from my MB860 using Tapatalk

  9. #8
    PV Master ECF Veteran whodat2112's Avatar
    Join Date
    May 2012
    Location
    Between Shelbyville and Springfield
    Posts
    8,109

    Default

    I agree with lunchblaze..........808 @ 2.5 to 3 ohms would be awesome

  10. #9
    Full Member
    Join Date
    Nov 2011
    Location
    Michigan
    Posts
    36

    Default

    Happy to say I got a bunch of these newer longer and multi-wick Stardusts from Smoktek that arrived Friday - using the 2.1 to 2.4 ones on KGO batteries, and they are simply awesome. I was completely in love with the prior short-wick ones, but these really do solve the problems the short-wick ones had. I swear they deliver better hits with a slightly lighter draw, not having to hold horizontally is great, but the huge payoff is not having to constantly refill them long before they get low on fluid. I was a bit hesitant to order about 8 for me and some friends without many reviews out there yet, but so glad I did. The multiple wicks are very thin, you don't even see them once they get in the liquid with the transparent colors, so my fear that they would be ugly was unfounded :) Huge improvement, look fantastic on my KGO batts, they do hit better on those than on my EGO's.
    CigarMan likes this.

  11. #10
    Forum Supplier CigarMan's Avatar
    Join Date
    Apr 2011
    Location
    St. Petersburg, Florida
    Posts
    1,154

    Default

    Quote Originally Posted by Andante51 View Post
    Happy to say I got a bunch of these newer longer and multi-wick Stardusts from Smoktek that arrived Friday - using the 2.1 to 2.4 ones on KGO batteries, and they are simply awesome. I was completely in love with the prior short-wick ones, but these really do solve the problems the short-wick ones had. I swear they deliver better hits with a slightly lighter draw, not having to hold horizontally is great, but the huge payoff is not having to constantly refill them long before they get low on fluid. I was a bit hesitant to order about 8 for me and some friends without many reviews out there yet, but so glad I did. The multiple wicks are very thin, you don't even see them once they get in the liquid with the transparent colors, so my fear that they would be ugly was unfounded Huge improvement, look fantastic on my KGO batts, they do hit better on those than on my EGO's.
    That's a great review! Thanks for the feedback

    Check the site later today for new additions of V2 in 2.4-2.9 ohms, new skirted 808 V2's for the VGO/808-eGo in 2.1-2.4 ohms. Also adding 9 colors of tips in flat and round!

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •