ohms

I got my old mech mod out tonite and gonna clean up the coils in my dead rabbit. I haven't used it in a while so I'm a bit rusty with my math but if I did it right, my coils are at .29 ohms and I divided the 4.2 volt by .29 and got a 14amp draw on a freshly charged battery. My battery is a...

Recently my Voopoo Drag changes the ohms while vaping, and kidna makes it impossible to vape. It either doesn't give enough power or too much. I changed the rcoil and the problem remains. What is causing this?

Hello peeps....I was wondering about the whole ohms discussion I see in forums... Some people ask me what ohms I like to vape and I was wondering...let's say I like vape at 1ohm that don't mean anything cause u can achieve that resistance with many different thickness of wires....also some say...

Hey guys, so I just turned my mod on and it got stuck at 9.99ohms and it was firing I took the tank off quickly and now if I try to get it back on it just fires. Any suggestions? Btw if I try to turn it off it just makes me choose new coil or old one and I cant even turn the mod off

Hello, guys! I have the, so called, wandering ohms! The mod measures my coil 0.7ohms, but when I push the button for a hit it jumps to 0.85ohms and when I release it ohms drop to 0.7 again I looked through the forum, so I checked the connection, the pin, the ports - it's not too tight or too...

I can’t seem to find the ohm settings on my smok mod, I tried calling the customer service number in Shenzhen and I think their closed for the weekend. Anyone use this mod or any advice? Thanks

I recently bought a RPM80 and have been using it with the rpm coil and pod it came with, but, when I try to use the rgc pod and coil it would just say on the screen "ohms too low". Anyone know how to fix this?

hi all i have created a build dual coil with 27gauge wire 5 wraps, i dont have an ohm reader to read the ressistance , and i want to put it in a single 18650 mech mode. Do you think its ok to do it like that ?

Hi, so I decided recently to move from a Sub-ohm tank to an rda as I wanted more flavour and it seemed like a natural progression. I did a lot of research first and bought some pre built coils just to get me started and used to setting coils/wicking. I brought myself an ohms meter and all the...

Did any of yall Ohmsters left notice Scott's BF ad? 5-100 ml Flavaboosted for $49.95. Butttt...look closer "Limited to stock on hand". Sure haven't seen that before, WTH? over? Is he Not gonna order more flavorings?? I actually Still get Root Beer Float from him. No choice. Everyone elses...

It seems this thing is going to drive me crazy. The problem with the dry hit has been resolved, but now I'm having a problem with the battery reading the ohms on the coils incorrectly. I'm using eleaf EC-S 0.6 ohm coils and they are reading at 0.72 ohms. I primed a new coil, let it sit overnight...

Hello, After vaping (sub-ohm) quite heavily for many years, I think it's time to quit that and switch back to MTL now. What's the best/cheap MTL tank, affordable higher stock Ohms coils that use less liquid? I'll up my nic content to 12mg. Thank you.

Can you use a regular multimeter instead of a specific meter for tanks?

Hello, I had a few things I wanted to run past someone with a better understanding of battery/ohms law etc, just for the sake of peace of mind. One is, as I understand it parallel battery set ups, you add the amps, so 2 20 amp batteries can hit 40 amps right? The batteries split the ultimate...

Hey, i've been vaping for a couple of months with friend's vape and i end up buying a vape for myself, the SnowWolf MFENG Kit. I put all the pieces together and I have a coil that should be 0.16 Ohms. But in the screen, it show 0.19 to 0.21 Omhs. Is it a problem ? Ps : English isn't my first...

I like a nice coolish vape. Been noticing lately whenever I set the Watts, it more or less ends up being close to the Ohm value (on the lower builds). Needless to say when the Volts stood up to fall in line, it was a huge bonus...:D I'm curious to know what your Ohm/Watt ratio is.

I have a tpriv 3 that recently has started reading ohms completely wrong. It is not accurate, and when it decides to be, it tries to change the ohm reading on me. It generally reads high, up to .2 ohms higher than the coil is actually (I have other mods, and a ohm reader for my rdas). Does...

Own a Vaporesso Armour Pro, running ceramic coils. Coils are spec'd at 0.3 ohms. When the mod was new, seemed to be pegged at 0.29. These days I jump around from 0.29 to 0.33 (and it does this by just rebooting the battery). Yes its not a lot but, it does make a big difference in heat...

Hello all, this is my first post here. I had a look online and couldn't find the answer to my question regarding baby beast coils. So my question is this, i have a Smok Procolor 225w and the tfv8 big baby beast with a bigger bubble glass 3rd party replacement, holds 6 mls i think, the coil...

Hey I just got a kylin mini rebuildable. I order some 1 ohm coils too and they are tiny compared to the one it came with. not sure what ohms that one is but im confused.. Are sub ohm coils thicker gauge? I thought it was the other way around. Lower ohms = less resistence? wouldnt the smaller...