rebuild

Hey all, great board. Just signed up tonight! Very first try at rebuilding anything so I tried it on a GS Air .75 ohm atomizer. So, let me get this out there first... I dont have an OHM meter at the moment, so I rolled the dice. Nothing bad happened just FYI. So before I tried I watched a...

So, I used to rebuild my dripper once a day. But lately I've been losing the patience to rebuild - I've even got a coil jig to speed up the process. I rebuild, have a pain-in-the-... time trying to get it to heat right. Then lose interest and throw in some cotton. Anyone else experience this at...

Hello! I have some cotton and kanthal wire coming in, and I have been thinking of rebuilding my new kangertech coils. But here lies the problem; I have the new Evod 2 clearomiser sitting on the evod battery and I'm just wondering what is the discharge rate of the battery. I have noticed that the...

I just rebuilt an ego one clr coil with 4 wraps of 30 gauge kanthal a1 wire.at first when I inserted the coil into my tank and tank into my eleaf the resistance shown was 1.9 ohms but when I inserted the cotton and wet it and filled liquid in the tank the resistance dropped to 1.5 ohms and it...

So not so long ago I decided to rebuild these heads after watching riptrippers video. I will list some of the things I have found out. 1. Use cotton. After you finish your coil, take a strip of cotton twist it and "screw" it in the coil. It wicks much better. 1,5. Use some old ... ego adapter...

Ok, so for the last few days I've been tweaking with rebuilding coils. Heres the tricky part, I'm rebuilding non-rebuildable coils to avoid spending 13 bucks on the Delta II RBA deck. Cheap yes I know but its a major learning experience for me. Anywho, i digress. After much trial and error...

Was just wondering where to buy cheap 510 connectors, with free shipping. Any advise would be much appreciated.

Looking for a good build on my unregulated dual 26650 box wired in series. . have tried twisted 22ga 9 wraps around 1/8. up to try anything suggested. Thanks.

hey guys, i've been on here for a few months now and i'm not sure if i should post this in the new members forum or not so forgive me if i've made a mistake. i've been using RDAs for about a month or so now and i'm having an issue with my wicks. i have a pack of this type of Japanese Organic...

I purchased an Atlantis tank for my first tank and realized quickly that these tanks burn up juice so quickly and go through coils rather quickly. I was sick of buying $4-5 coils every 4-5 days. So I decided to borrow some cotton and wire from a friend and wrap my own micro coils. I used 28g...

Hey guys, I'm attempting to rebuild my nautilus mini coil head but after several failed attempts I've come here. It keeps giving me a low res error, and my mod was reading my original coils just fine. Any reason you can think of as to why my rebuild may not be working? IPV Mini, 28 Gauge...

Although I've been vaping for almost 6 years, I'm finally getting into trying to rebuild my atomizers, mainly because the cost of the subtank heads are $5 at my local shop, which is drawing the line for me, but also because I want to create my own. First, here's the stats: - iStick 30W - Kanger...

my coil fire up when I make it with 33 gauge kanthak,I put one wick in it as shown in the youtube videos, but when I put in the top wick it stops working.Since I don't have silica yet, i'm using good portion of my kanger t2 silica. is this happening because of the t2 silica?i'll have to buy...

Looking into the rebuildables but have yet to purchase one. Right now is the research phase trying to feel out the best mods and methods, etc. My first question to be answered is the title of my post. A RDA with a reservoir. Something I can load up with 10 ml and continuously vape. No stopping...

First of all, English is not my native language so my apologize for any typos or grammar errors. This type of coil requires a great amount of power so I guess it wont work (won't deliver the best flavor) on standard ego batteries or similar. I found it best on 11-15 watts. So if your mod can't...

I have 2 Joyetech & 1 Evod battery. I recently started rebulding my own coils for my protank. Last night while I was vaping, my batteries began to act up one after the other. The light would flicker 3 times, and not hold a solid vape. It would just flash and I couldn't smoke off of it. Both of...

I rebuilt my Protank II coil to 1.3 ohms using organic cotton. I threw is on my DNA30 box mod, and I was just wondering what is the highest wattage I should use with this tank. I don't know if there are any safety concerns with the heat being produced inside the tank. I've been vaping at around...

Yay! I finally found the RDA, RBA, RTA, etc section! Well thats good. Ohkay, so I just got a Magma today and I know these are very popular with the flavor chaser's out there. I wanted to see what everyone's favorite builds on these RDA's are? Please answer in this format: Dual or single...

I am sure this question has been asked...but in the past hour I have been searching, I cannot seem to find what I am looking for. So I apologize if this is a repeat! I have never attempted to rebuild a coil before. I have a tank that isn't very popular that I got from my local shop. It is called...

Hey, I was having some trouble rebuilding protank heads with 32 gauge kanthal including burnt grommets, shorts, overheating etc. Someone on here recommended I try some resistance - no resistance - resistance wire. I just received 50 pre-cut 1.8Ohm wires in the post. The length is about 2inch...