voltage

Hi! I am glad to be a member of such a helpful community. I was reading good questions and valuable answers to them last week. Now decided to be part of it (at least as a newbie with questions) I am new to vaping, started 1.5 months ago with Vaporesso Tarot Pro 160W + Smok Cloud Beast TFV8...

Hi Just received a new Gyrfalcon All44 battery charger. More confusing than my old 2 bay intellicharger so I have a question. I'll be charging 18650's but don't know which voltage to select. Anyone able to advise please? Thanks

Hey guys i'm currently using a wismec rx300 with 4xsamsung 25r 2500mah and a ijoy limitless plus rdta with dual alien coil reading now 0.2, my fear is that the max amp limit is 20A and on the screen it shows that current amp is 18-19 while on 70 watts. Now my primary doubt is that values shown...

So I am noticing a lot of my mods have internal batteries and the specs for them include the resistance range and the wattage limit. For example I have a Wismec RX mini here.. Internal 2100mAh Battery Wattage Range: 1W - 80W Temperature Range: 200°F - 600°F / 100°C - 315°C 0.1Ω - 3.5Ω (VW...

Hi. I'm new here so please bear with me and bear with my not-so-much-but-probably-sufficient knowledge in Vaping. Here's my baby btw: Avocado 24 Evic Primo 200W Twisted Clapton dual coil build (0.37ohm reading on my mod) 70/30 Juice Married VTC4 3.6V batteries Married VTC5 4.2V batteries And...

I recently rebuild my coils on my 60w evic vt, I'm currently running dual 7 wrapped coils at 50w but my voltage is at 4.84 and I seem to be roasting through them. The coils are 24g nichrome wire. I've only been vaping for a year or so so I'm still not entirely sure how to make everything...

Hey everyone, I need help finding an atomizer. I used to subohm and really hated the way it used up all my e liquid so fast, it ended up costing more than cigarettes. I'd really like to smoke somewhere between 2 and 3 ohms, but to be honest I don't really know much about how ecigs work. I've...

Hello there, I'm kinda new to vaping and I got myself a Kangertech Subox mini c Kit with an LG HG2 Battery. The rated Voltage is around 3.7 V. But if go above 30 Watts I get way more than 4 V output. (atleast thats what my Subox mini c shows me) If i go to 38 Watts its over 5 V output. Is that...

hi brothers in vapes, i use currently eleaf 60 w tc with griffin and made dual normal coil kanthal A1 27 gauge 0.74 ohms and volt 5.08 and watt 35. nobody speaks about voltage in regulated mods, thats why i would like to make me more educated. reg mods normally says they make from x voltage to...

Dear Fellow Vapers, Looking at the online ohm calculators, when you plug in a resistance of 0.2 ohms and a power of 180W you get a discharge of 6V and a current of 30A. I'm confused because I thought batteries could only fire up to 4.2V when fully charged (that's what most specifications say...

Hello! I just bought myself an Eleaf iStick 100W mod with 2x Samsung 3000 mAh 30Q 20A batteries and an Eleaf iJust 2 atomizer with the default 0.3ohm coil. I've been vaping for almost a week now liquids with 3-4 mg/ml nicotine but they're rough on my lungs as in the last 2 mornings I coughed...

I'm running an Arctic tank and eleaf I stick with a .2 coil so it's at 50w which is the max for the battery. It gets really hot after like 2-3 good drags in a row. Is this normal ? I'm thinking about switching back to a .5 coil and running it at 30w again but it's a little harsh tasting at...

I run a CoolFire4 plus at around 20 watts with a .5 ohm coil. Now, what is the difference between wattage and voltage. My coil can only go up to 35 watts so how many volts can I go up to. And does voltage and wattage work together, or are they 2 seperate modes?

So my vamo v5 is dying... I don't want another. I've gone through 3 or 4. I see vamo has come out with V6/7/8/9/10 already in the time it took me to wear this one out. My problem is that almost all of the new vamos are VW or require 18350 batteries. So what else is out there that takes 18650s...

I have a 2.0 Ohm dual-coil clearomizer/atomizer, and a variable Ego Twist II, with a variable voltage of between 3.3v and 4.8v. How would I factor in having dual coils, I've calculated at 4.0v with a 2.0 Ohm coil I would hit the 8-watt sweet spot. Do I need more voltage because I'm using dual...

So I have recently build a coil (as you can see on the image, that vapes perfectly) and I usually dont mind about the ohms if the meter shows something between 1,8-2,1 ohms. But this one raised up a question. How much does ohmeter add? As you can see on the second image I have two adapters on...

I am very new when it comes to this type of stuff, I recently purchase a mvp 20w box mod and kind of overwhelmed with the voltage and wattage. Should i use voltage or wattage when vaping. I am also wondering what is the right voltage or wattage setting for a 1.6 ohm coil.

Hello fellow vapers Ive been vaping for a while but pretty new to sub ohm vaping and wondering what would be idea Voltage and Wattage for Maximum Vapor Production and Flavor, my setup is: Innokin MVP 3.0 Pro Aspire Triton w/ 0.4 Ohm coil 50:50 PG:VG E-Liquid any charts or tips would be...

I have an akuma v3 and I can feel the voltage drop when my battery hits about 3.9v which I really don't like, which mechs have you guys experienced the least amount of voltage drop with? I clean it about every 2 days and it's still not helping so thanks guys!

Hey guys, I just bought an atlantis mega and cfmaxx today. So far I'm loving it but I do have one question. On the website it states that it is compatible with 0.3-5.0 ohms but on the 0.3 ohm coils it says 70w-80w. The problem being the cfmaxx only goes to 50 watts. All i need to know is if its...