Hi all,
Im thinking of getting the sigelei 100w plus mod and im trying to figure out how long it will last me.
Im thinking of using two samsung 25r 18650 batteries
3.7v
2500mah
35a peak discharge/22a continous.
Am i right in thinking that if i use a coil at 1.2 resistance at 20 watts with 7.4...
Hey guys, what it is is that i have a GS eGo 2 2200mAh 2014 ecig battery (Mudder if thats makes any difference). I am thinking about buying the new twist plus with variable voltage. I am trying to find out what the voltage is on this particular ecig battery and i cant find it atall on the...
I have a variable voltage/wattage battery and I have heard that some say charge it as often as you can this reduces stress, others say that's bad, some say a combination of long and short cycles but I don't know which is best. My battery's manual said get down to 10% but it doesn't measure it...
I have a variable W/V battery and I prefer it on 4.2, but it is expensive and I never get the full 300 charges out of them like they claim they are supposed to get. Will decreasing the voltage by 0.4 Volts increase the battery life to a significant extent that makes it worth while?
For all you brainiacs and problem solvers out there. I've just recieved my Hcigar DNA 50 Hana Modz Clone from our friends at Fasttech. Overall it seems like a niece piece for the price. I've only really one issues with it which is as follows. The voltage read out is fairly accurate up to 40w but...
Hello there all i-stick vapers.
I was hoping to get your feedback on your favorite voltage and/or wattage setting for best flavor and clouds.
I typically use a Kanger aerotank v2 with a 1.8 ohm coil.
Any and all input is greatly appreciated!
Thanks all
Ok this post I'm doing is meant to educate myself and others on KR808D-1 Batteries,Cartomizers, Ohms, Voltages.
I've been trying to do research on what Ecig brands are KR808D-1, what the voltages are for all of them. I was hoping eventually it will be a long list.
A lot of this stuff is foreign...
I am wondering if anyone can tell me how accurate the voltmeter funtion is on the d2 or d4 charger from nitecore.... I am considering buying the digital intellicharger to avoid having to buy a multimeter... am I better off using an inexpensive multimeter to use for voltage and ohm readings on my...
Not only is this thing a joke but its actually really dangerous.
Lets just say you have just built a 0.2 ohm coil (lowest res it can go) and you start vaping it at 180W. Assuming you are using pure VG juice, PG isnt viable to use at high wattage. The VG will react to the insane amount of heat...
I'm wondering because I don't want to spend extra money on a vv/vw battery if I can't raise the volts for a better throat hit without causing damage to the clearomizer or it's coils. I took an electronics class in high school but remember absolutely nothing about it.
I know I saw something somewhere about some sort of one-way diode/gate/something to prevent batts from equalizing, but I can't seem to find it rt now and can't seem to ask google the question properly.
So I work in a vape shop. I get a lot of questions about which batteries are best for sub-ohming and which last the longest, etc. I've been doing some reading and can't get a clear cut answer of how mah, amps, and voltage effect the performance of mechanical or regulated mods. If someone could...
I got a little card from Mt Baker Vapor that has the recommended VV for the different Ohms. My clearomizer is a 2.1, and it says I should stay in the range of 3.5-3.8. However, the device, (Innokin) goes up to 5.0, and this is the original clearomizer it came with. Up until I read this chart...
I am currently using the mvp 2.0 and it has a 11 watt max. I was actually told that it doesn't regulate the power and that even though is Variable power it is still based off the current charge on the battery.
So Im looking for a new Mod. I was thinking about the "Cloupor DNA30 ". Its a 30...
Ive had my IPV V2 since Thursday now and love it. Ive tried a ton of different builds on it and haven't had this issue yet(not even sure if its even an issue). Today i was messing around with builds my plume veil and ended up going back to the build that i had on it before after experimenting...
I've heard that the eGo style batteries like the 1.8 or higher resistance coils. Is this true? And a thumbnail of voltage drop vs. resistance.
Keep On Chuffin'! :vapor:
Sorry, I might be a bit late to the party on this one, but I did a search and only found archived threads for provari V3.
So, here's the deal.
My local vape shop owner told me today that Provari has a new model coming out (look at pbusardo's Provari tour, he hints that they're working on a...
right now I'm just switching between 2 iClear 10s that have been treating me really well, but I just landed another job which means in gonna have a lot more extra money to put towards this wonderful hobby so I figured I'd ask my wonderful fellow forum-goers for some of their favorite tanks to...
First of all, I've actually been vaping for a total of more than 12 months. However it was only a few days ago that I switched to RBA, I'm using a Kayfun Lite+. Previously I've been vaping on the basic ego clearomizers. And therefore I am newbie in the world of true vaping.
I've been doing a...
I've had my Provari for about a year now and I am still using the same 4 batteries (rotated) that I received from Provape with my order. 2 x AW IMR 18490's and 2 x AW IMR 18650's.
I seem to recall at first when I would check the voltage, even with an atty attached, it would read 4.2 fresh off...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.