AGA T2+ Smoktech SID problem

[captainsmackfresh]

I have had a problem using my SID Smoktech mod APV with my AGA T-2 Rebuildable atomizer tank. No matter how many wraps 4-6... I have had the LED Display "Low Load" and is wont fire. I was wondering if anyone is also having this problem and/or has solved this problem. I am losing all hope with the AGA T2 which bums me out since I have heard such good things about it.

 

[SuperDave68]

when u are running an rba, a digital ohm meter is essential, and you can pick one up very cheap, harbor frieght sells one for less than 10 dollars.
if you are running a SS wick you can have shorts there as well, an ohm meter will help you track down your ohm problem. also if you are using a fairly low guage kanthal / nichrome your resistance will be quite low. i am not familiar with the SID mod, but most VV Mods won't do less than a .9 ohm coil and some have issues with as high as 1.2 ohms min.