E cig tank is jammed

[Richard Blake]

On accident, I screwed my Atlantis tank too tight onto my eleaf istick battery and the bottom part will not come off of the battery. I tried the rubber band/ rubber gloves and it does not want to budge. Anybody have any tips that could help me get this off? I have been trying!

 

[mcol]

pair of pliers?

 

[Richard Blake]

pair of pliers?

I tried that but the airflow kept slipping and it wouldn't move

 

[Richard Blake]

Let me add, I could care less if the tank made it or not... I care more about the battery.

 

[WindyCityJoe]

Have you tried putting in the freezer for 15 or 20 minutes and then try unscrewing again?

 

[Richard Blake]

Have you tried putting in the freezer for 15 or 20 minutes and then try unscrewing again?

can i put it in the freezer with the battery?

 

[Dconnor]

can i put it in the freezer with the battery?

Yes. Will sometimes help get them off.

 

[Susan~S]

Try gripping the metal below the airflow control ring using needle nose plyers.

 

[WindyCityJoe]

can i put it in the freezer with the battery?

Good question, not sure what that might do to the battery, better to forego that idea until you find out for sure. Hope you can get it off.

 

[zapped]

Take a small screwdriver, put it in one of the slots under the airflow control valve and tap it with a hammer so it turns in a counterclockwise direction.

A couple of sharp raps should do the trick. Just make sure youre wearing thick gloves if you do this while holding it in your hands.

 

[Richard Blake]

Ladies and gentleman I have done it! I put electric tape around the tank and took a pair of pliers and unscrewed it

 

[Rabbit Slayer]

How is the 510 pin on the istick?

 

[Richard Blake]

How is the 510 pin on the istick?

I have had no problems with it so far