thinning juice?

Status
Not open for further replies.

Sgt.Rock

Ultra Member
ECF Veteran
Verified Member
Mar 13, 2014
1,476
1,645
The Poconos
Order a liter of PG and keep it for future use...

Add PG to your existing juice in small increments until you get the consistency you want...I'd start at adding about 10% by volume and increasing if needed.

It will lower the nic level somewhat (math) but should actually increase the flavor slightly.
 
  • Like
Reactions: dhood

440BB

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Apr 19, 2011
9,222
33,992
The Motor City
A bit of distilled water or alcohol will thin the juice.

Agreed. I would start with 3-5% distilled water, or if it's not handy tap water will do for a small test batch. If that flows well, you haven't reduced the nic or flavoring by much and you'll know how much to use when you want to thin a larger amount. Good luck!
 

DavidOck

ECF Guru
Supporting Member
ECF Veteran
Jan 3, 2013
19,952
169,760
Halfway to Paradise, WA
I'll second 440's suggestion. And go slow with the addition.

If you find you have to add so much water to get the viscosity you need for that tank, then the PG route might be better.

Keep in mind that any dilution MAY dilute the taste as well. PG tends to carry flavor better than VG, and can also add to the throat hit, so diluting with it may work better. But it will be a process :)

Good luck!
 
Status
Not open for further replies.

Users who are viewing this thread