+ Reply to Thread
Page 4 of 24 FirstFirst 1234567814 ... LastLast
Results 31 to 40 of 233
Tea bag/tea filters.... which and where and who and how? in E-Cigarette Technical; Originally Posted by spark001uk Is it possible to get hold of the original material that they are made of? Ultimately, ...
  1. #31
    Full Member
    Join Date
    Apr 2009
    Location
    Outside Burton, TX
    Posts
    15

    Default

    Quote Originally Posted by spark001uk View Post
    Is it possible to get hold of the original material that they are made of?
    Ultimately, I suppose you could find it at a fabric store.

  2. Advertisement
  3. #32
    Full Member
    Join Date
    Jun 2009
    Posts
    44

    Default

    What would i ask for exactly?

  4. Advertisement
  5. #33
    Full Member
    Join Date
    Apr 2009
    Location
    Outside Burton, TX
    Posts
    15

    Default

    o_0
    Jeez...it's...it's a fine, fine mesh. Almost what a bridal veil might be made of, but even finer. Fine enough that I'd almost classify it as pixels.

  6. #34
    Full Member ECF Veteran
    Join Date
    May 2009
    Location
    IN
    Posts
    79

    Default

    I like the tea bag a lot better. I don't feel like I have to top it off as often (or I DIDN'T until I got my 510 haha.) I think it's pretty easy and fairly cheap. I just don't like it when the polyfill gets stuck to the atomizer, it tastes like sh** and overall just can't be GOOD.

    I use lipton teabags. I DO feel like they hold liquid in them though, that cannot be used, but then, so does the polyfill. I just roll them up loosely and make sure they can fit in my 510 cart. It's fairly easy really, and I can get four fillers out of one tea bag. I change it every couple of days.

    When I was using the tea bag for my 901 cart, I never got liquid in my mouth anymore either, so that was a perk.

  7. #35
    Super Member ECF Veteran bitey's Avatar
    Join Date
    Mar 2009
    Location
    Central Ohio
    Posts
    437

    Default

    Quote Originally Posted by Shrodingers Other Cat View Post
    o_0
    Jeez...it's...it's a fine, fine mesh. Almost what a bridal veil might be made of, but even finer. Fine enough that I'd almost classify it as pixels.
    I think what you are talking about is tulle. It is extremely fine and is often used to hold wedding favors and also for wedding decoration. It can be bought in fabric stores, at Michaels, and, sometimes in craft departments. For fabric stores and Michaels, go to (or ask for) the wedding section. It comes cut into circles and also in bolts.

    Our son is getting married this Saturday, and we are sure to have some of the tulle left over, so I will try vaping with it next week.

  8. #36
    Full Member
    Join Date
    Apr 2009
    Location
    Outside Burton, TX
    Posts
    15

    Default

    Quote Originally Posted by bitey View Post
    I think what you are talking about is tulle. It is extremely fine and is often used to hold wedding favors and also for wedding decoration. It can be bought in fabric stores, at Michaels, and, sometimes in craft departments. For fabric stores and Michaels, go to (or ask for) the wedding section. It comes cut into circles and also in bolts.

    Our son is getting married this Saturday, and we are sure to have some of the tulle left over, so I will try vaping with it next week.
    *headsmack*
    Yes!
    D'uh!

  9. #37
    PV Master ECF Veteran
    Supporting Member
    Hellen A. Handbasket's Avatar
    Join Date
    Feb 2009
    Location
    Surprise, Arizona
    Posts
    3,395

    Default

    OMG... I think I have rolls of Ribbon made of this stuff (sheer, has some body to it, NOT talking about a regular ribbon though).

    *Double Head Smack*

    Now I have to rummage through my craft stuff (and that room is a disaster area). I'll post back if I find that it works, and what brand it is! Ugh, and IF I can find it... LOL. BTW, nylon gossamer ribbon width would probably be close to the perfect height in cart size!
    Live in ARIZONA? Join Vaping in Phoenix Social Group forum on ECF! Monthly socials, local vendors and great people. Click HERE
    Also on FaceBook.

  10. #38
    Full Member
    Join Date
    Apr 2009
    Location
    Outside Burton, TX
    Posts
    15

    Default

    Quote Originally Posted by Hellen A. Handbasket View Post
    OMG... I think I have rolls of Ribbon made of this stuff (sheer, has some body to it, NOT talking about a regular ribbon though).

    *Double Head Smack*

    Now I have to rummage through my craft stuff (and that room is a disaster area). I'll post back if I find that it works, and what brand it is! Ugh, and IF I can find it... LOL. BTW, nylon gossamer ribbon width would probably be close to the perfect height in cart size!
    Score!
    Good luck!

  11. #39
    PV Master ECF Veteran
    Supporting Member
    Hellen A. Handbasket's Avatar
    Join Date
    Feb 2009
    Location
    Surprise, Arizona
    Posts
    3,395

    Thumbs up Organza Ribbon

    First off... you do not want this:

    (Tulle netting)

    You want Organza, which looks like this:


    You don't have to get ribbon, but the Organza ribbon is perfect and a roll of ribbon is cheap. Probably best to buy white, so you aren't dealing with dyes. This also comes in bolts at a fabric store, and you could get 1/4 yard.

    This stuff is exactly what the Lipton gossamer teabags are. Nice find Bizzy and Kenb.

    What I found in the craft stash were 2 kinds of organza ribbon for testing.

    First is labeled 100% Nylon, from Michaels, Special Value (the cheap stuff) 5/8", 15FT roll, no idea what I paid for it, probably $2. It has a more ribbon like texture at the top/bottom with the sheer in the center. I just left it on, figured it would just suck up a bit more liquid. I cut about 1-1/2 inches of length and halfazz accordion folded (stuffed) it into my little 510 cart using a toothpick to help get it down in, but not too tight. Tucked down the cut off end end back into the cartridge. Loaded up with liquid and have been smokin on it for about 30 minutes. No leak, no mouthful of liquid. Seems to be holding plenty of liquid. Rolling seems to be a pain for a really small cart. Maybe I'll try again...

    Then I used the same stuff above for a larger cart (DSE801 penstyle). I accordion stuffed it in, filled it up and got a huge amount of liquid in my mouth. Nasty. Suctioned some out of the cart with the glass dropper, and it seems to be fine now but gets lots of liquid on the side of the cart (cart sweat) which these do anyway... probably not optimal for a larger cart to stuff it in, or maybe I need to do it better (more/less). Smokes fine though and probably would be better without the thicker woven edges and just the
    Organza ribbon.

    The other ribbon I tried, (Michaels 3 yards, $3.99, also 100% Nylon, #9 32mm or 1-1/4") has tiny copper wires in the top and bottom of the ribbon. I cut about 6"-8" (more/less) and left wire in it. I rolled it around a toothpick and put the roll in my DSE801 cart. The wire left at the bottom keeps the roll nicely tight. I trimmed off the top to cut to length by pulling it up just a tad (the wire at the top is gone then) pushed it back down in the cart and fanned it out a bit. Took plenty of liquid in to fill it (but I was careful to not overfill like the last mouth full since now I have a stomach ache! Bleh) It is working like a champ. Waited about an hour, took it out and no dye bleeding. Still would rather use white.

    So! Looks like you don't have to pay for tea you aren't going to use. Buy Organza and look to check the fabric content for either Polyester or Nylon listed on the roll. I'm sure Walmart has it as well as a bazillion fabric/craft stores.

    I can see the guys now - shifting uncomfortably from one foot to the other while standing in the ribbon isle or in front of bolts of fabric and scratching their heads... giving up and telling the fabric lady they want Organza in white... LOL!

    If you decide to use this, please give a report too since I've only got about an hour use total in on this!!
    Vape on!!
    Live in ARIZONA? Join Vaping in Phoenix Social Group forum on ECF! Monthly socials, local vendors and great people. Click HERE
    Also on FaceBook.

  12. #40
    Full Member
    Join Date
    Apr 2009
    Location
    Outside Burton, TX
    Posts
    15

    Default

    You want Organza, which looks like this:
    I should *almost* have to turn in my "Chick Card" for not knowing the difference...but I think I'm OK.

+ Reply to Thread
Page 4 of 24 FirstFirst 1234567814 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO