e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat

Go Back   e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat > The E-Cigarette > Tips & Tricks
Connect with Facebook
Register Blogs FAQ Search Today's Posts Mark Forums Read

Notices

Tips & Tricks Share your tips on making the best out of your e-smoking product here!

Reply
 
LinkBack Thread Tools Display Modes
Old 06-27-2009, 07:25 PM   #1
Full Member
 
daniel2828's Avatar
 
Join Date: Jun 2009
Location: Iowa
Posts: 80
Default Dripping and Topping: A Happy Medium?

I've noticed in all the videos showing how to re-stuff cartridges (at least the ones I've seen to date) that the filler is trimmed exactly to the length of the cartridge, just like the original filler. Eventually, this results in the filter being pushed further down by the atomizer coil and taking the shape of the coil itself. In effect, the coil is then merely resting against the filler material rather than coming into full contact with it.

So I tried refilling a cartridge (with Fluval), leaving about 1/8th of an inch additional material above the cartridge. Initially, it's a little messier to fill with liquid, but the atomizer coil will eventually push the filler down so that it is flush with the top of the cartridge rather than recessed. This is much better than having to fluff it back up now and then with a pair of tweezers to provide better contact. After top ups, the amount of vapor and throat hit is quite impressive, and I would think this method is better for the atomizer than direct dripping.

And speaking of making messes, I got tired of jumping up and down to clean my fingers after getting juice on them, so I went to an office supply store and purchased one of those sealable trays with a sponge in it, the kind secretaries use to wet their fingers to better flip through pages of paper. Wiping my fingers off on that throughout a day at the office saves a lot of triips to the sink.
__________________


daniel2828 is offline   Reply With Quote
Old 06-28-2009, 03:13 AM   #2
Banned
 
Join Date: Apr 2009
Location: Above the Underworld
Posts: 241
Blog Entries: 1
Default

^ I refill mine in the bathroom and just wipe the excess off with toilet paper!
Rogue X2 v2 is offline   Reply With Quote
Old 06-28-2009, 04:02 AM   #3
Junior Member
 
Puter's Avatar
 
Join Date: Jun 2009
Location: Pennsylvania, USA
Posts: 9
Default

hey Thanks! This was very imformative.
puter

Quote:
Originally Posted by daniel2828 View Post
I've noticed in all the videos showing how to re-stuff cartridges (at least the ones I've seen to date) that the filler is trimmed exactly to the length of the cartridge, just like the original filler. Eventually, this results in the filter being pushed further down by the atomizer coil and taking the shape of the coil itself. In effect, the coil is then merely resting against the filler material rather than coming into full contact with it.

So I tried refilling a cartridge (with Fluval), leaving about 1/8th of an inch additional material above the cartridge. Initially, it's a little messier to fill with liquid, but the atomizer coil will eventually push the filler down so that it is flush with the top of the cartridge rather than recessed. This is much better than having to fluff it back up now and then with a pair of tweezers to provide better contact. After top ups, the amount of vapor and throat hit is quite impressive, and I would think this method is better for the atomizer than direct dripping.

And speaking of making messes, I got tired of jumping up and down to clean my fingers after getting juice on them, so I went to an office supply store and purchased one of those sealable trays with a sponge in it, the kind secretaries use to wet their fingers to better flip through pages of paper. Wiping my fingers off on that throughout a day at the office saves a lot of triips to the sink.
Puter is offline   Reply With Quote
Old 07-01-2009, 03:47 AM   #4
Full Member
 
Join Date: May 2009
Posts: 81
Default

I look like the total junkie and I guess I am a vaping junkie. I have a tray with empty carts, fluv, syringes, e juice. Man it will be a funny day when I have to explain all of that!
TheColoradoDude is offline   Reply With Quote
Old 07-01-2009, 08:23 PM   #5
Full Member
 
Join Date: Jul 2009
Posts: 12
Default New at this, need some advice!

I started using e-cigs a month ago. I haven't smoked a real cig since then. I really like it but getting frustrated. Started with a Liberty but just had problems. Now I have a mini which I really like.

My problem is refilling the cartridges. It seems the pre-filled cartridges have much more of a kick & last much longer. When I refill them it's just not the same. I want to keep going with this but it's gettng so frustrating. I'm spending way too much time trying to figure it out - time I don't have because I have 2 small children to take care of & they are trying to see what I'm doing. I really need some advice. Thanks.
kittycatt is offline   Reply With Quote
Old 07-01-2009, 08:43 PM   #6
Super Member
 
Join Date: May 2009
Location: RSM, CA
Posts: 655
Default

Quote:
Originally Posted by kittycatt View Post
I started using e-cigs a month ago. I haven't smoked a real cig since then. I really like it but getting frustrated. Started with a Liberty but just had problems. Now I have a mini which I really like.

My problem is refilling the cartridges. It seems the pre-filled cartridges have much more of a kick & last much longer. When I refill them it's just not the same. I want to keep going with this but it's gettng so frustrating. I'm spending way too much time trying to figure it out - time I don't have because I have 2 small children to take care of & they are trying to see what I'm doing. I really need some advice. Thanks.
If you have a syringe and needle (I always dull the needles with sand paper then polish the tip to prevent accidental sticks, that's just me) fill the cart from the bottom up instead of dripping juice on the stuffing and waiting for it to absorb. When you fill by dripping there are often air pockets that decrease the amount of juice. You can also look for the "Straw Mod' which also helps prevent air pockets in the cartridge.
__________________

framitz is offline   Reply With Quote
Old 07-01-2009, 08:43 PM   #7
Full Member
 
ADRUNKK's Avatar
 
Join Date: Apr 2009
Location: Vacaville, CA USA
Posts: 39
Default

Kitty, just a guess but you may not be topping off the carts like you think. I had the same problem when i started vaping. I could see the juice puddling on top and i thought the cart was topped off. What was happening is the top half of the cart would be full of juice but the bottom was dry. What i do now is top off the cart and use and unbent paper clip and pull some of the polyfill from the egde of the cart. Air bubbles will come up from the bottom and allow the juice to get to the bottom of the cart. Sometimes i have to repeat this process many times before the cart is actually full. I can put about 11 to 12 drops of juice in a blank 901 cart.
ADRUNKK is offline   Reply With Quote
Old 07-01-2009, 08:51 PM   #8
Supporting Member
 
tmbrown327's Avatar
 
Join Date: Mar 2009
Location: Rhode Island
Posts: 418
Default

Kittykat, it sounds like you need a low maintenance solution. Personally, I would recommend a Janty Stick. It would resolve most of these problems for you. Long lasting (inexpensive) batteries, huge cartridges, consistent delivery and performance, excellent customer service etc. IMHO
tmbrown327 is offline   Reply With Quote
Old 07-01-2009, 09:38 PM   #9
Full Member
 
Join Date: Jul 2009
Posts: 12
Default

Wow - thanks for the response! It is puddling on the top!!! I feel like I'm wasting the juice. I don't have a syringe but I was thinking - if I take the stuff out & maybe soak it in the juice would that work? Anyone tried that?

I'm going to look into the Janty. They have a website? I really do need a low maintenance solution.
kittycatt is offline   Reply With Quote
Old 07-01-2009, 09:45 PM   #10
Super Member
 
happily's Avatar
 
Join Date: May 2009
Location: ut
Posts: 1,964
Default

Quote:
Originally Posted by kittycatt View Post
Wow - thanks for the response! It is puddling on the top!!! I feel like I'm wasting the juice. I don't have a syringe but I was thinking - if I take the stuff out & maybe soak it in the juice would that work? Anyone tried that?

I'm going to look into the Janty. They have a website? I really do need a low maintenance solution.
U can also take tweezer and push the filler down to squeeze the air out and add juice while pulling up the filler. There is also a straw mod for cartridges here that helps as well
__________________
The sledge hammer: JOYE 510 THE WRECKING BALL VP2 http://www.vaprlife.com/index.html
happily is offline   Reply With Quote
Reply

Bookmarks
  • Submit Thread to Digg Digg
  • Submit Thread to del.icio.us del.icio.us
  • Submit Thread to StumbleUpon StumbleUpon
  • Submit Thread to Google Google

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT. The time now is 12:49 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.2.0 RC8
© ECF 2007 to 2009 ψ Ω

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184