+ Reply to Thread
Results 1 to 4 of 4
Semi-full carts, poor vapor? in E-Cigarette Technical; I've found some of my carts when about half full begin to lack in vapor.. plus my atomiser gets hot.. ...
  1. #1
    Moved On
    Join Date
    Aug 2008
    Location
    San Francisco
    Posts
    38

    Default Semi-full carts, poor vapor?

    I've found some of my carts when about half full begin to lack in vapor.. plus my atomiser gets hot..

    up untill now i've just been topping off my carts.. however.. leaving my eliquid at home today i was forced to try something different..

    I left the cart in but unscrewed the battery and blew a little back into the atomiser.. heard a little gurggling.. screwed the battery back in = Plenty of vape.

    My assumption being by blowing into the atomiser i was forcing hte eliquid out of the cart and into the chamber..

    hope i ain't doing anything bad.. but totally seems to work.

  2. Advertisement
  3. #2
    Forum Supplier ECF Veteran leaford's Avatar
    Join Date
    May 2008
    Location
    shenzhen China
    Posts
    6,548
    Blog Entries
    4

    Default

    Don't blow too hard, you could blow out too much liquid and flood it. Otherwise, it sounds like a good method. You can also pull out the filler and rotate it, although that can be messy if you don't have tweezers on you.

  4. Advertisement
  5. #3
    Moved On
    Join Date
    Aug 2008
    Location
    San Francisco
    Posts
    38

    Default

    Quote Originally Posted by leaford View Post
    Don't blow too hard, you could blow out too much liquid and flood it. Otherwise, it sounds like a good method. You can also pull out the filler and rotate it, although that can be messy if you don't have tweezers on you.
    good advice.. thanks!

    hadn't thought about rotating the filler.. due to the shape it'd taken.. lol

  6. #4
    Forum Supplier ECF Veteran leaford's Avatar
    Join Date
    May 2008
    Location
    shenzhen China
    Posts
    6,548
    Blog Entries
    4

    Default

    You mean the tip of the filler? Yeah, it can kind of clump up, and looks kinda melted together. But you can easily tease the fibers apart with a pin or tweezers and re-fluff it. It's not melted, just compacted and stuck together. And it doesn't make any difference I can tell if you put it at the bottom of the cartridge.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO