Threads

**firdaddy** · 07-08-2009, 12:10 AM

tested my 901 attys
1. 3.6
2. 3.4
3. 3.8

401 atty
3.5
and i cant find my other 401 atty but they work identical...
so in short you might be on to something

**raven9mm** · 07-21-2009, 07:53 PM

Originally Posted by Brian S

The problem is by the time you figure out which one is good the warranty is out. Mine may sit for months before I actually use it. It would be nice to know if one is up to snuff immediatly and ship it back.

Brian

Ruyandirect has 1 year warranty...

wdave -

My workaround for the 901 is to buy five atomizers at a time and toss out the ones that fail. That shows how much I prefer the 901 over other cheap ecigs I've tried.

ummm, ill pay shipping if you just ship them to me...

Ruyan direct gives a 1 year warranty. I just buy from them, and ill ship them back within the year to get new ones once they die.

**JasonFanky** · 07-29-2009, 05:39 AM

Hello, it won't allow me to post a thread about this subject so I am posting here. :P I wanted to know the thread size of the 901 atomizer. I can't seem to find it anywhere. If someone could help that I would be very grateful!

**JasonFanky** · 07-29-2009, 05:39 AM

Hello, it won't allow me to post a thread about this subject so I am posting here. :P I wanted to know the thread size of the 901 atomizer. I can't seem to find it anywhere. If someone could help, I would be very grateful!

**wdave** · 07-29-2009, 05:13 PM

Originally Posted by raven9mm

Ruyandirect has 1 year warranty...

wdave -

ummm, ill pay shipping if you just ship them to me...

Ruyan direct gives a 1 year warranty. I just buy from them, and ill ship them back within the year to get new ones once they die.

Ha ha...it has took me two months to believe you guys that the most important thing is how hot they get. The one's I thought were bad are good and others I thought were good were bad. Why do I have to learn EVERYTHING the hard way?

Dave

**Shreck** · 07-30-2009, 05:18 AM

8mm thread , .75 mm thread pitch Or if looking for a tap or die to make the threads:
m8 x .75

Originally Posted by JasonFanky

Hello, it won't allow me to post a thread about this subject so I am posting here. :P I wanted to know the thread size of the 901 atomizer. I can't seem to find it anywhere. If someone could help, I would be very grateful!

**happily** · 07-30-2009, 05:22 AM

around 15 starter kits and all 510 atty's were 2.9=3.1 ohms and all perform well

**VaporX** · 07-30-2009, 06:54 PM

not to throw a wrench in the works, but

have you included the break in phenomenon.

many have expierenced this where an atomizer takes a day or two to fully "kick in" and make the good vapor

possiblly the 9ohm one you got needed a break in to drop to 3.5?

**screenz** · 07-31-2009, 08:10 PM

Guys,

I have been vaping for about three weeks now. I have become obsessed with it as I try to figure things out. I use a 510 and a 901. 510 is manual so I understand that 3 drops on the atomizer is not a problem for testing.

What I can not figure out is how you know an atomizer has gone bad and when it simply needs cleaning. If an atomizer goes bad, does it simply stop working. Will dripping kill the atomizer? When you look at an atomizer firing without the cap, can you get an indication

Thanks in advance.

Dan

**wdave** · 07-31-2009, 09:29 PM

I hardly ever clean my 510 atty's. This thread has helped me learn that they work great as long as they get hot enough. I've had to blow into the atty when using JC juice. I've tried another brand of juice and haven't had to do that all day.

Of course, you might waste a lot of time cleaning attys like I did

PS My 901 atty's clog all the time. But I haven't used them with the new juice yet. I like the 510 so much.

PS2 Women look good smoking cigars

Dave