toilet paper to protect battery? - e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat

millhugz · 08-04-2009, 11:58 PM

I've been trying to protect my battery from sticky switch.. so I maybe came up with a little trick.. if you take a thin layer of toilet paper, you can stick it in to the cartomizer from the battery end, roll it to make the tp piece like a little line so in case you over fill it the tp will soak up the e liquid. Make sure it is thin enough to still get airflow.. also you can just put tp piece in the middle of the battery and the cart and screw the 2 pieces in while holding the toilet paper in between.

Also I use a rubber piece for the battery.

Just a little trick I've been trying to use.. hope it helps.

millhugz · 08-05-2009, 06:42 PM

Updated with pics!

42109 · 08-05-2009, 06:45 PM

...or it will wick the liquid right into your battery...
Let us know how it works.

millhugz · 08-05-2009, 06:53 PM

I don't stick the tp piece into the battery I let a tip of it hang off the cart and screw in the battery with the rubber piece in it, so far I did not have any problems and batt is clean.. works great for me.

08-04-2009, 11:58 PM	#1
millhugz Full Member Join Date: Jul 2009 Posts: 94	toilet paper to protect battery? I've been trying to protect my battery from sticky switch.. so I maybe came up with a little trick.. if you take a thin layer of toilet paper, you can stick it in to the cartomizer from the battery end, roll it to make the tp piece like a little line so in case you over fill it the tp will soak up the e liquid. Make sure it is thin enough to still get airflow.. also you can just put tp piece in the middle of the battery and the cart and screw the 2 pieces in while holding the toilet paper in between. Also I use a rubber piece for the battery. Just a little trick I've been trying to use.. hope it helps. Last edited by millhugz; 08-05-2009 at 06:41 PM.

08-05-2009, 06:45 PM	#3
42109 Super Member Join Date: May 2009 Location: S. Indiana Posts: 535	...or it will wick the liquid right into your battery... Let us know how it works. __________________ LabRat... No Lab. Not in the economic interest of the U.S.A.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-05-2009, 06:42 PM	#2
millhugz Full Member Join Date: Jul 2009 Posts: 94	Updated with pics!

08-05-2009, 06:53 PM	#4
millhugz Full Member Join Date: Jul 2009 Posts: 94	I don't stick the tp piece into the battery I let a tip of it hang off the cart and screw in the battery with the rubber piece in it, so far I did not have any problems and batt is clean.. works great for me.