PLEASE! help with my batteries!!! - Page 2 - e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat

brew30 · 09-28-2009, 01:54 PM

When you screw the batt into the charger lead dont over tighten i did this with mine and it says its charged but it not try to unscrew it about 1mm

ajm79 · 09-28-2009, 08:02 PM

Are all manual batteries sealed? If not does anyone know which models DO have sealed batteries?

ajm79 · 09-28-2009, 08:11 PM

Quote:

Originally Posted by brew30

When you screw the batt into the charger lead dont over tighten i did this with mine and it says its charged but it not try to unscrew it about 1mm

They seem to take a charge just fine cause I can blow on them and they work just fine. It isn't till I screw on an atty that they quit working. Not only do they not fire the atty, the LED barley flickers and super dim? Then I unscrew it and blow or suck on the batt and it seems to work again?

HYDRO · 10-02-2009, 12:52 AM

I just got my 901 Kit. The Ac Wall plug came with a wird looking 2 thin prong tip, but then has a Normal Wall prong adapter...

My question is the 2 thin prong tips have a metal casing - I just wanna make sure before I plug the 2 thin prongs into the Normal Prong adapter that I am not supposed to remove these metal tips ?

SusanB · 10-28-2009, 07:12 PM

love the staple trick...pure brilliance

WarrLordd · 10-29-2009, 11:49 PM

Do you drip? Even ff you do or don't then you got some cleaning to do. First of some attys has a hole right where the + of the battery power is located. This is where liquid gets tru. Then some has a wick that that prevents this from happening.

But then most times the inner core where the atty connects to the battery sometimes get flushed with a bit of liquid. No matter how.. Even tho the atty is suppose to burn up most of the liquid it still leaks down to the battery core..

Each night i have to clean inside the core of the atty where the battery is connected and also clean the battery it self. Just use some tissue and toothpick (never use a pin or any metal device to clean battery) You might so happen to cause a surge and break it.

Reason i started doing this is one day i looked into the the base of the charge where you screw on and noticed the top of he charger device was getting a bit black.. (This was liquid that was in the battery component, had to clean this out also just stuck a tooth pick wrapped with some tissue.

Like i quoted on another thread about attys: Ecigs are leaky babies we have to always clean and wipe them up. So do take care.

sbphotog · 10-30-2009, 12:15 AM

The staple mod is pure genius!

09-28-2009, 08:02 PM	#12
ajm79 Full Member Join Date: Aug 2009 Location: Portland, Oregon Posts: 49	Are all manual batteries sealed? If not does anyone know which models DO have sealed batteries? __________________

10-28-2009, 07:12 PM	#15
SusanB Full Member Join Date: Sep 2009 Location: NY NY Posts: 59	love the staple trick...pure brilliance __________________

10-30-2009, 12:15 AM	#17
sbphotog Full Member Join Date: Oct 2009 Location: Ohio Posts: 141	The staple mod is pure genius! __________________ Smoke Free Since: 10/15/09 Hardware: Joye 510/Njoy Npro *View My Photography*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-28-2009, 01:54 PM	#11
brew30 Full Member Join Date: Sep 2009 Location: ROTHERHAM U.K Posts: 28	When you screw the batt into the charger lead dont over tighten i did this with mine and it says its charged but it not try to unscrew it about 1mm

10-02-2009, 12:52 AM	#14
HYDRO Full Member Join Date: Sep 2009 Location: P-Cola, FL Posts: 69	I just got my 901 Kit. The Ac Wall plug came with a wird looking 2 thin prong tip, but then has a Normal Wall prong adapter... My question is the 2 thin prong tips have a metal casing - I just wanna make sure before I plug the 2 thin prongs into the Normal Prong adapter that I am not supposed to remove these metal tips ?

10-29-2009, 11:49 PM	#16
WarrLordd Full Member Join Date: Oct 2009 Posts: 53	Do you drip? Even ff you do or don't then you got some cleaning to do. First of some attys has a hole right where the + of the battery power is located. This is where liquid gets tru. Then some has a wick that that prevents this from happening. But then most times the inner core where the atty connects to the battery sometimes get flushed with a bit of liquid. No matter how.. Even tho the atty is suppose to burn up most of the liquid it still leaks down to the battery core.. Each night i have to clean inside the core of the atty where the battery is connected and also clean the battery it self. Just use some tissue and toothpick (never use a pin or any metal device to clean battery) You might so happen to cause a surge and break it. Reason i started doing this is one day i looked into the the base of the charge where you screw on and noticed the top of he charger device was getting a bit black.. (This was liquid that was in the battery component, had to clean this out also just stuck a tooth pick wrapped with some tissue. Like i quoted on another thread about attys: Ecigs are leaky babies we have to always clean and wipe them up. So do take care.