wow some very good information...
Im very new to vaping im rockin a 510 and the best thing ive found is read everything you can find on the 510, carts, mods, tech, etc my very noobish advice is take it very slow see what works and what dosent, dont rush it im starting to get the hang of things. Like i said tho before i even got mine in the mail i was on here reading all the good bad and ugly about the 510 different ways to do this and how to fix that.
Happy vaping![]()
Well, it stands to reason that if you're using it more, it'll last less time, lol.
One thing I figured out about the straw mod - make sure you don't have too much filler in it. I take about 1/4 - 1/3 of the filler out when I put the straw in. And make sure it sits BELOW the top of the straw. Also, take the filler out and rinse it out and dry it every once in a while. The liquid sometimes thickens up over time and sticks to the filler.
To the OP - you know it needs to be refilled when the vapor production is low and you get a dry/burnt/chemical taste.
A couple of links for new 510 owners:
FAQs: Frequently Asked Questions About Electronic Cigarettes
10 tips to avoid harsh, burnt taste on 510 atomizers
I like the PTB mod, but if you are not careful, you will flood the atty very easy with it.
But i like that. It is almost like dripping when you do it, you just have to remember to not draw too hard, or you will get juice in your mouth, and it does not taste as good that way.
![]()
Just wanted to throw something up really quick about my 510. the more i use it the better the taste gets with every day. also ive found with the fruty flavors if you take a sip of coffee and then whale the ol 510 za zing yummmmm. just my .02
One tip I will share on filling the 510 cart works well for me. I fill it all the way up until juice pools at the top. I then wad up a tissue and wick that liquid up by touching it to the filler.
I do this twice for a newly filled cart. No flooding problems since I began this.
I use the same basic trick.. except I use the tip of the bottle to suck that last drip back out. Don't need the tissue and I save that precious drop of juice!
Also, after I've topped it back off, I use the paperclip or toothpick to pull the filler back up flush with the cartridge body. I know that the bridge will push it back down.. and that's OK. I just want to make sure that the bridge is touching the filler.
would you guys know if the janty dura is exactly the same as the 510's? can i use the usb charger fo the 510 on my janty dura battery?
thanks
Bookmarks