Juice not wicking... - E-Cigarette Forum

angelique510 · 10-29-2009, 05:28 AM

I am using a 902 (j118 or VX2) I have tried the PTB mod, real wool, and fluval.

Fluval with a straw seeems to be the best, but I still do not get all the juice out of the cart, I'm getting maybe 50% I also have found that I need to wait a couple minutes between puffs for the juice to wick down to the atty.It forces me to vape very slow. Or I do the shaking thermometer thing.

The 902 cart hold tons of juice - and I want it - I want it all!!!! I hate having to top off when I still have most of the juice left.

Forum people are full of great advice on all things vape. Can I get some help please?

~A

Vuedoo · 10-29-2009, 04:19 PM

I Have the same problem with my 510. If Someone could Create an e-cig that would wick to the atty more efficiently without flooding it they could corner the market on these things. went through buying 2 prior starter kits to finally get to a 510, but I'm still not satisfied.

nubee · 10-29-2009, 04:34 PM

welcome to the big ol' club.

It seems to be a matter of type of juice (thick/thin), temperature, cart size, type of filler, lay it down flat on desk of upright in pocket, etc....

To date, my best bet has been the fish tank filter polyfill "packed" in just right and rinsed 2-3 times a day. Seems that over the day the left over juice starts to inhibit the flow for top off juice and the whole things spins downward from there.

So, I pull it out, rinse it, dry it, stuff it, refill it and I'm good for another 1/3-1/2 of the day.

Mr.Darcy · 10-30-2009, 03:32 AM

Quote:

Originally Posted by angelique510

I am using a 902 (j118 or VX2) I have tried the PTB mod, real wool, and fluval.

Fluval with a straw seeems to be the best, but I still do not get all the juice out of the cart, I'm getting maybe 50% I also have found that I need to wait a couple minutes between puffs for the juice to wick down to the atty.It forces me to vape very slow. Or I do the shaking thermometer thing.

The 902 cart hold tons of juice - and I want it - I want it all!!!! I hate having to top off when I still have most of the juice left.

Forum people are full of great advice on all things vape. Can I get some help please?

~A

why not dump the carts and just drip?
you wont waste any liquid,and its a lot less hassle,believe me.

Patriotjed · 10-30-2009, 03:46 AM

The filter foam is working splendidly for me....

Eheim filterpad mod

angelique510 · 10-30-2009, 07:27 PM

Quote:

Originally Posted by Mr.Darcy

why not dump the carts and just drip?
you wont waste any liquid,and its a lot less hassle,believe me.

Dripping would be I bunch of hassle, I think. I couldn't just grab the e-cig out of my purse and start puffing. Dripping would be a pain inthe butt (if not lethal) while driving. The goal is to have the least amount of fiddling with the thing as possible. But I know dripping has tons of loyal users here. It's just not for me.

BUT!!!! I think I found the solution. I tried less fluval. About half as much as one would thing is needed. I was able to (chain) vape for three hours. That's about as long as my battery lasts - so it works out perfectly for me.

~A

ezcomputers · 11-03-2009, 02:54 AM

Yes, I agree on using less than you think you need... I actually looked at a prefilled 901 cart I got online and it had a small square or rectangle rather of fluval folded 3 times like an accordion, it was half the amount I had been putting in my carts, so I mimiced that on all future carts and problem solved!! Wicks like no tomorrow, uses up all the juice in cart and life is good.... I had resorted to dripping while driving and thank god I tried using less filler.. Much safer and im sure safer for everyone else too lol.....
Love to se that headline... Man killed in car crash trying to drip on his atomizer while driving
That would really get the anti's going against e-cigs now wouldn't it!!!!

Closet Toker · 11-03-2009, 06:47 PM

This trick is great.

Must Try! ADM auto drip mod

I use it with the blue fish foam, and straw mod combined.

Ashhead · 11-03-2009, 07:03 PM

THe ADM drip mod is the way to go, holds an extra 5-7 drops and will dispense to the last drop. Fluval, foam or PTD, they ALL work. Just a note, if the juice leaks, not enough filter media. If atty isn't getting wet enough, then too much filter media. Once balanced, it is the bomb.
Will work with 510, 801 and others.

kristin · 11-03-2009, 07:20 PM

Or try this one: Reservoir Straw & Plug Mod (RSP Mod)

10-29-2009, 05:28 AM	#1
angelique510 Super Member Join Date: Sep 2009 Location: Virginia Posts: 544	Juice not wicking... I am using a 902 (j118 or VX2) I have tried the PTB mod, real wool, and fluval. Fluval with a straw seeems to be the best, but I still do not get all the juice out of the cart, I'm getting maybe 50% I also have found that I need to wait a couple minutes between puffs for the juice to wick down to the atty.It forces me to vape very slow. Or I do the shaking thermometer thing. The 902 cart hold tons of juice - and I want it - I want it all!!!! I hate having to top off when I still have most of the juice left. Forum people are full of great advice on all things vape. Can I get some help please? ~A __________________ blucig and J118 mod

10-29-2009, 04:19 PM	#2
Vuedoo Full Member Join Date: Oct 2009 Posts: 14	Same I Have the same problem with my 510. If Someone could Create an e-cig that would wick to the atty more efficiently without flooding it they could corner the market on these things. went through buying 2 prior starter kits to finally get to a 510, but I'm still not satisfied.

10-29-2009, 04:34 PM	#3
nubee Super Member Join Date: Jun 2009 Location: Gurnee IL, USA Posts: 940	welcome to the big ol' club. It seems to be a matter of type of juice (thick/thin), temperature, cart size, type of filler, lay it down flat on desk of upright in pocket, etc.... To date, my best bet has been the fish tank filter polyfill "packed" in just right and rinsed 2-3 times a day. Seems that over the day the left over juice starts to inhibit the flow for top off juice and the whole things spins downward from there. So, I pull it out, rinse it, dry it, stuff it, refill it and I'm good for another 1/3-1/2 of the day. __________________

11-03-2009, 02:54 AM	#7
ezcomputers Full Member Join Date: Oct 2009 Posts: 67	Yes, I agree on using less than you think you need... I actually looked at a prefilled 901 cart I got online and it had a small square or rectangle rather of fluval folded 3 times like an accordion, it was half the amount I had been putting in my carts, so I mimiced that on all future carts and problem solved!! Wicks like no tomorrow, uses up all the juice in cart and life is good.... I had resorted to dripping while driving and thank god I tried using less filler.. Much safer and im sure safer for everyone else too lol..... Love to se that headline... Man killed in car crash trying to drip on his atomizer while driving That would really get the anti's going against e-cigs now wouldn't it!!!! __________________

11-03-2009, 06:47 PM	#8
Closet Toker Super Member Supporting Member Join Date: Mar 2009 Location: La Crosse, WI. Posts: 541	This trick is great. Must Try! ADM auto drip mod I use it with the blue fish foam, and straw mod combined. __________________ Prodigy/801

10-30-2009, 03:46 AM	#5
Patriotjed Senior Member Join Date: May 2009 Location: Southaven, MS Posts: 184	The filter foam is working splendidly for me.... Eheim filterpad mod

11-03-2009, 07:03 PM	#9
Ashhead Super Member Join Date: Oct 2009 Location: Central Pennsylvania, USA Posts: 312	THe ADM drip mod is the way to go, holds an extra 5-7 drops and will dispense to the last drop. Fluval, foam or PTD, they ALL work. Just a note, if the juice leaks, not enough filter media. If atty isn't getting wet enough, then too much filter media. Once balanced, it is the bomb. Will work with 510, 801 and others. __________________

11-03-2009, 07:20 PM	#10
kristin Accessories Supplier Join Date: Aug 2009 Location: Antigo, Wisconsin Posts: 2,524	Or try this one: Reservoir Straw & Plug Mod (RSP Mod) __________________ Tobacco Free Since 8/21/09, Proud member of CASAA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode