Re-Stuffed Carts. Working Very well.

[smokingclam]

Got my pack of filling from Walmart today and this definitely works great. Thanks for all the sugestions everyone.

[chuckie]

I went to petsmart and got some fluval. I took an old cart,put in 6 drops of juice,inserted batting,topped of w/2more drops. Got 2 good draws than nothing. pushed the batting back down into the cart than back up to the edge,still nothing.I'm using a dse 901. Any guesses?

[Sun Vaporer]

I went to petsmart and got some fluval. I took an old cart,put in 6 drops of juice,inserted batting,topped of w/2more drops. Got 2 good draws than nothing. pushed the batting back down into the cart than back up to the edge,still nothing.I'm using a dse 901. Any guesses?

Chuck--the core needs to be moist. Fill till it is just about to pool on the top--but NOT POOLING--you do not have enough e-liquid in the new core for it to wick. A new core should take at least 1 ML (1.4 ml of e-liquid for penstyle new core)--So filler up--Hope that helps, Sun

[Di]

loose is the secret,
not stuffed tight,

it is there to hold the liquid and stop it flooding out,
too tight stuffed,
and it will not flow......

Di .......

[chuckie]

thanks sun I will add more juice and let u know what happens. btw I just opened a new blank,removed battng,put in 6 dps replaced batting +4 more drps on top...working fine.

[Sun Vaporer]

thanks sun I will add more juice and let u know what happens. btw I just opened a new blank,removed battng,put in 6 dps replaced batting +4 more drps on top...working fine.

Chuck--In my opinon, as well as many other members who have posted many times---without a doubt the best way to fill and refill a cartridge is with a syringe or an inkjet printer cartridge refiller (same think as a syringe with a blunt tip) You can get syringes from www.puresmoker.com or www.johnsoncreeksmokejuice.com --You stick it all the way down in the core and fill from the bottom up. Now you have a full cartridge without all the guess work. Just make sure to fill till the top is moist, but not pooling on the top. If you over did it and you have pooling, just backout with the syringe--Hope that Helps--Happy Vaping--Sun

[chuckie]

thanks dikerry and sun i took both of your advices i trimmed the batting to about 1/2 as much as it was and i also added more drops and everythings working fine now
thanks again

Chuck

[rsngfrce]

Chuck--In my opinon, as well as many other members who have posted many times---without a doubt the best way to fill and refill a cartridge is with a syringe or an inkjet printer cartridge refiller

Without making you go into to much detail for something I could probably figure out with some searching, is there a particular reason why this is the best way? I have a syringe, but I have been using igetcha's (EVO user tips video guide) method of pulling the stuffing out, putting drops in, putting the stuffing back in, etc. mainly just because that was how he did it in the video and it seemed logical

[chuckie]

Hi sun, Katy sent me a 5cc syrge w/needle in my 901 kit. should i draw up about 1.4 MLs and then inject it under the stuffing and then top it off or is there a better way and/or a video i can watch
thanks again for everyone's help

Chuck

[Sun Vaporer]

Hi sun, Katy sent me a 5cc syrge w/needle in my 901 kit. should i draw up about 1.4 MLs and then inject it under the stuffing and then top it off or is there a better way and/or a video i can watch
thanks again for everyone's help

Chuck

Chuck--Fill up the syringe to 1.5 ml, then insert it all the way down the core and fill till the top is moist and return the rest to the bottle. Works great every time--Hope that Helps--Sun