Another Trick To Cleaning Automizer. in E-Cigarette Technical; Let it soak in Coca Cola for 3-4 Hours then rinse under tap water for a few minutes blow out ...
-
Another Trick To Cleaning Automizer.
Let it soak in Coca Cola for 3-4 Hours then rinse under tap water for a few minutes blow out the side where it connects to the battery and let dry in a warm place over night, works great
-
Senior Member
ECF Veteran
The Coke bath had been my favorite cleaning method but last week I tried the Efferdent bath and it worked way better. You can use any of the denture cleaning brands-this just happened to be the one I had already. This cleans so well it even got the baked on stuff around the wick off and the metal parts are so shiny. One of the attys I cleaned is my original one from my first kit that I got last March and it works really well again.
Last edited by melly710; 11-20-2009 at 02:22 PM.
-
Super Member
ECF Veteran
Something else that works -- though I don't know how well yet -- is to leave your e-cig in your pocket, and then do the laundry. 
The battery is trashed and the end cap popped off the cart, but I tried the atty and it worked. Those things are built!
-
Ultra Member
ECF Veteran

Originally Posted by
melly710
This had been my favorite cleaning method but last week I tried the Efferdent bath and it worked way better. You can use any of the denture cleaning brands-this just happened to be the one I had already. This cleans so well it even got the baked on stuff around the wick off and the metal parts are so shiny. One of the attys I cleaned is my original one from my first kit that I got last March and it works really well again.
What ^ said is all i do 2 attys going strong 3 months
2 GGTS/AVS 1 SS GGTS/UFS

-
Senior Member
ECF Veteran

Originally Posted by
Brachinus
Something else that works -- though I don't know how well yet -- is to leave your e-cig in your pocket, and then do the laundry.
The battery is trashed and the end cap popped off the cart, but I tried the
atty and it worked. Those things are built!
good one!!!
-
I was using a hydrogen peroxide to clean my attys, today I used tonic water, and wow it worksten times better. I'm guessing it works like the cola.
-
Super Member
ECF Veteran

Originally Posted by
kyivish
I was using a hydrogen peroxide to clean my attys, today I used tonic water, and wow it worksten times better. I'm guessing it works like the cola.
Cola and tonic water will probably both have effervescence that lasts longer than peroxide, but cola also has an acid that breaks down the alkaline buildup on the atty. I don't think tonic water has the same acid, but I could be wrong.
-
Senior Member
ECF Veteran
it's the juice, different juices clean up differently. What works for one juice might not work for another juice. Even the way you "burn" the juice can dictate how to clean up the atty. Your probably not actually cleaning the coil, mostly your cleaning the air ways and mesh....so they say...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks