+ Reply to Thread
Results 1 to 10 of 10
Attn dura/510 users! in E-Cigarette Technical; If any of you are having the problem.. where you attempt to take a drag and are bamboozled by 2 ...
  1. #1
    **ECF's 10,000th Member!**
    Forum Supplier
    ECF Veteran applefr3ak's Avatar
    Join Date
    Dec 2008
    Location
    Ogden, Utah, United States
    Posts
    1,504

    Default Attn dura/510 users!

    If any of you are having the problem.. where you attempt to take a drag and are bamboozled by 2 seconds and it cutting off?!?! Try this simple Easy trick to ensure smooth operation!

    All you have to do is rotate the E-Cig in your mouth.. half turns back and forth should do just fine...

    Do that while Taking your nice long deep drag...

    Enjoy your Dura/510!

    I know it sounds stupid.. but it works.. at least it does for me and a lot of other owners!!

    Post your results Joyetech has stated they believe the issue is in the cart design and are working to get around the issue.

    Cheers!
    Jason

  2. Advertisement
  3. #2
    Senior Member
    Join Date
    Dec 2008
    Location
    Houston, TX
    Posts
    183

    Default

    Now if you could just solve the "cart leaking all over the place" issue...

  4. Advertisement
  5. #3
    **ECF's 10,000th Member!**
    Forum Supplier
    ECF Veteran applefr3ak's Avatar
    Join Date
    Dec 2008
    Location
    Ogden, Utah, United States
    Posts
    1,504

    Default carts

    Hmm havent had any of mine really leak.. all been pretty tight.. But i know they are re-doing the cart design. I will mention it to them and see what they say

    Jason

  6. #4
    Super Member
    Join Date
    Jan 2009
    Location
    Arizona, USA
    Posts
    451

    Default

    Mine doesn't leak either... carry it all day in my shirt pocket.

  7. #5
    Ultra Member ECF Veteran sherid's Avatar
    Join Date
    May 2008
    Location
    Canton, Ohio USA
    Posts
    1,997

    Default

    Well, I have two atomizers, just bought one last week. Tonight neither is working. As always, I'm sure Jeff will replace them. However, I am about to toss them all...really, really discouraging. If I could just go to a store and trade in bad parts, fine, but going back and forth like this is crazy.
    "Deja Moo : The feeling you’ve heard this bull before !"

  8. #6
    **ECF's 10,000th Member!**
    Forum Supplier
    ECF Veteran applefr3ak's Avatar
    Join Date
    Dec 2008
    Location
    Ogden, Utah, United States
    Posts
    1,504

    Default drippin?

    are you Dripping?? I for one have personally found they do NOT like dripping... They do best just off the carts.. How did your atomizers die?? Just go cold??

    Jason
    Last edited by applefr3ak; 02-11-2009 at 03:23 AM.

  9. #7
    Full Member ECF Veteran linkdead's Avatar
    Join Date
    Oct 2008
    Location
    Keokuk, Iowa, United States
    Posts
    92

    Default

    OK rotating does seem to help. It must make a slight variation in pressure on the vacuum switch. so that means the cart leaking problem is the real culprit behind the battery problem. Well hope the solve it. the Dura is a great device to carry in my pocket at work. I work in xray and have to kinda sneak my ecig around at work. Security knows about it and doesnt care but I can just hear all the patient complaints if they saw it.

    Edit is here ---> Forgot to add that just starting out with a lite drag and changing pressure will reactivate the switch. It is what I have been doing.
    Last edited by linkdead; 02-11-2009 at 04:23 PM.

  10. #8
    **ECF's 10,000th Member!**
    Forum Supplier
    ECF Veteran applefr3ak's Avatar
    Join Date
    Dec 2008
    Location
    Ogden, Utah, United States
    Posts
    1,504

    Default yep

    yeah that seems to work too. But i rather just rotate it back and forth and not have to change pressure lol.. I just really wanted to post this to help some frustrated people out. I am sure there were some bad batteries out there.. there always are a few duds... but.. I think they are built just fine, Hate to see Janty or joyetech get bad press.Especially when its an easy fix. I hope the cart redesign does help with the leaking... now i watch for it and it doesnt leak eccesively or anything but it does a little around the rim. Im not sure if they need to increase the size of the airflow holes or what but i am sure they will figure it out.

    Jason

  11. #9
    Mr. Want-it-Yesterday !! Verified Member
    ECF Veteran
    Supporting Member
    smokum's Avatar
    Join Date
    Dec 2008
    Location
    Ottawa, Ontario -CANADA-
    Posts
    4,454

    Default

    I've also found rotating the Dura helps lengthen the draw, and seems to strengthen the hit too.

    Linkdead,

    Yup, same problem here at the hospital...... The employee's at least ask me about it and approve, but damn the clients are the worse cowardly bastards there are !!

    VapeOn,
    Greg

  12. #10
    Super Member
    Join Date
    Jan 2009
    Location
    Arizona, USA
    Posts
    451

    Default

    I have to say, I'd probably do a double take if I saw a hospital employee vaping inside.

    Public perception and all...

+ Reply to Thread

LinkBacks (?)

  1. 02-19-2009, 12:48 AM
  2. 02-18-2009, 08:00 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO