New M40x Cartridge Design?

[CheeMiss]

You guys are so very kind for sharing.

Thank you for the truth. And Thank You for being You!

[CheeMiss]

The manufacturers...lie. Ok, exaggerate. but, you're also not refilling that cart from empty on 3 drops. And there are better ways. Realistically, an M401/2/3/evo/pilot cart (with the 'side wings') holds around .25ml of fluid, from a new, unfilled but stuffed (poly fill) cart.

Okay, I watched Scott's video.....there is no way my M401-3winged cart can hold more than 6 drops as per Scotts video. (btw: at least it's 3 more than I was using before. yeah). but not 9....I tried and got juice on the inhale. yukkie!

Apparently the one I have is the newest model. (?) Why don't they just make these e-cigs with bigger carts for the juice? They have the technology. In this case, less is NOT more! lololol

Scott, now that I know the metal pyramid on the atty is suppose to be wet with juice....I have just had a flash as to a much easier, larger fill design to the juice cart. Less time spent filling and more time vaping. hmmm, I wonder who I should talk to about it?

[igetcha]

Okay, I watched Scott's video.....there is no way my M401-3winged cart can hold more than 6 drops as per Scotts video. (btw: at least it's 3 more than I was using before. yeah). but not 9....I tried and got juice on the inhale. yukkie!

Apparently the one I have is the newest model. (?) Why don't they just make these e-cigs with bigger carts for the juice? They have the technology. In this case, less is NOT more! lololol

Scott, now that I know the metal pyramid on the atty is suppose to be wet with juice....I have just had a flash as to a much easier, larger fill design to the juice cart. Less time spent filling and more time vaping. hmmm, I wonder who I should talk to about it?

regarding the steel wick.........moist yes, flooded no! lol your new design will need to make sure that it doesnt deliver too much liquid to it or you will get problems.

it sounds like you have one of the really small inner carts. if so, when adding drops just fill it to 3/4, replace wool and then add 1 or 2 drops. then wipe of excess liquid with paper towel. on the vid is also a tutorial on how to remove excess liquid from the carts if you over fill............its at the end in the troubleshooting questions part.

cheers,

scott

[dormouse]

I got my first PV, an M402 last week (from MyPVShop). I had been using the carts that came with it (wings and flat bottom on inner cart). Yesterday I grabbed one of the separate black carts I ordered at the same time and sort of freaked when it was different - the black one's inner cart was clear and had the flat side and a spike on the bottom. So I couldn't get it to stand on its own and it would also slide back down into the mouthpiece if I pushed it up with a paperclip. I had more trouble with it too - got juice in my mouth (fortunately peach), and it wasn't wicking the juice as well - I had to top it off frequently and I could see there was still plenty of juice in it. Maybe the flat-sided one I used was just stuffed badly.

So if I understand correctly, the winged ones with the flat-bottomed inner cart are the new ones? The plugs on mine are also different - the winged ones' plugs are longer with a solid top and open circular bottom (I use the flat side push the inner cart down and tapered end to push it down inside). The flat-sided ones' plugs are shorter with a solid bottom and an open circular top. I just ordered more blank carts elsewhere yesterday so I could compare some juices I got - I hope I get the winged ones.