Simple and effective way to boost cart performace. - Page 4 - e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat

flexy123 · 03-29-2009, 06:48 AM

idea:

vaps should be in the shape of a screw. Then you can screw the cart on it and the vap would basicallly enter the wool and be 100% enclosed.

By the way...why cant i EDIT posts here?

Ramblin · 03-29-2009, 04:50 PM

Quote:

Originally Posted by flexy123

idea:

vaps should be in the shape of a screw. Then you can screw the cart on it and the vap would basicallly enter the wool and be 100% enclosed.

By the way...why cant i EDIT posts here?

There are some restrictions in place on the forum until you hit 15 posts. Not sure why and I can't remember if the edit function was one of the restrictions.

matisamd · 03-31-2009, 04:27 PM

Got a titan 510 today and found the carts fit the 901 its goood cause if your grooving it to get more they last abit longer.

MoonMan · 03-31-2009, 07:51 PM

The tip about putting a tiny hole in the bottom of the cart (for a 901 at least) is a GREAT one. I did, and it's still vaping strongly a couple hours later with no topping off.

VERY good tip!

Amanda! · 04-01-2009, 11:29 PM

I feel kinda stupid for asking this, but where exactly should the hole go in the 901 cart. I just got my pv and I would really like to try this. I just don't really know what's meant by "the bottom of the cart". thanks for any help

Hangar · 04-01-2009, 11:52 PM

yea and could someone test this on a 401 cart?...putting up a how-to video would be a great idea...im also a noob awaiting arrival of my first e-cig (401) and would like to try this if i understood it better step by step.

Meave · 04-02-2009, 03:40 AM

I'm king of confused as where to put the hole as well in the 901?

MoonMan · 04-02-2009, 03:50 AM

For the 901, you put the hole in the bottom of the brown plastic cup that the filler sits in. It pops out of the black tip, just pull on it.

Cfidave · 04-02-2009, 01:49 PM

If you did that, it seems the juice would leak out into the mouth piece opening. Am I missing something?

MoonMan · 04-02-2009, 04:48 PM

Quote:

Originally Posted by Cfidave

If you did that, it seems the juice would leak out into the mouth piece opening. Am I missing something?

You would think that, but it doesn't. The viscosity of the fluid holds it in.

Just make a tiny pinhole. This releases the vacuum formed in the cart and allows the juice to flow better.

03-31-2009, 07:51 PM	#34
MoonMan Senior Member Join Date: Jan 2009 Posts: 265	The tip about putting a tiny hole in the bottom of the cart (for a 901 at least) is a GREAT one. I did, and it's still vaping strongly a couple hours later with no topping off. VERY good tip! __________________ Check out the UPAC mod HERE - juice dispenser and big battery life all-in-one!

04-02-2009, 03:50 AM	#38
MoonMan Senior Member Join Date: Jan 2009 Posts: 265	For the 901, you put the hole in the bottom of the brown plastic cup that the filler sits in. It pops out of the black tip, just pull on it. __________________ Check out the UPAC mod HERE - juice dispenser and big battery life all-in-one!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-29-2009, 06:48 AM	#31
flexy123 Full Member Join Date: Mar 2009 Posts: 60	idea: vaps should be in the shape of a screw. Then you can screw the cart on it and the vap would basicallly enter the wool and be 100% enclosed. By the way...why cant i EDIT posts here?

03-31-2009, 04:27 PM	#33
matisamd Junior Member Join Date: Mar 2009 Posts: 9	Got a titan 510 today and found the carts fit the 901 its goood cause if your grooving it to get more they last abit longer.

04-01-2009, 11:29 PM	#35
Amanda! Full Member Join Date: Mar 2009 Location: Oklahoma City, Oklahoma Posts: 26	I feel kinda stupid for asking this, but where exactly should the hole go in the 901 cart. I just got my pv and I would really like to try this. I just don't really know what's meant by "the bottom of the cart". thanks for any help

04-01-2009, 11:52 PM	#36
Hangar Senior Member Join Date: Mar 2009 Posts: 250	yea and could someone test this on a 401 cart?...putting up a how-to video would be a great idea...im also a noob awaiting arrival of my first e-cig (401) and would like to try this if i understood it better step by step.

04-02-2009, 03:40 AM	#37
Meave Full Member Join Date: Mar 2009 Posts: 29	I'm king of confused as where to put the hole as well in the 901?

04-02-2009, 01:49 PM	#39
Cfidave Full Member Join Date: Mar 2009 Location: North Central Pennsylvania Posts: 45	If you did that, it seems the juice would leak out into the mouth piece opening. Am I missing something?