Page 1 of 3 123 LastLast
Results 1 to 10 of 26
Like Tree9Likes

Thread: Diamond series auto batts on 510 boge cartos w/adapter

  1. #1
    Ultra Member ECF Veteran dale1962's Avatar
    Join Date
    Oct 2009
    Location
    Charlotte,NC
    Posts
    2,390

    Default Diamond series auto batts on 510 boge cartos w/adapter

    Hello thinking of ordering some of these batts on sale and was wondering if anyone out there is using these with boge or smoktech 510 carts with adapter and how they perform.I need some more hands free batts for work and the 510's suck that I have had....have used this combo before the diamonds and 510 carts w/ adapter and hit very well but it has been 8 months to a year ago and did'nt know if the diamonds had changed since then.

    I have so many boges and smoktech 510 cartos is reason I ask don't need more carts just some good hitting auto batts with these.I have tried some of V4l older batts with adapter on 510 boges in past and some of them wouldn't fire even with all the pulling out carto and batt pin.So really just want to make sure this combo is a go before I pull the trigger on ordering some.TIA,Dale

  2. #2
    Moved On Verified Member
    ECF Veteran

    Join Date
    Jul 2010
    Location
    Boise, Idaho
    Posts
    3,755

    Default

    Funny you mention that Dale because I've been thinking of getting Female to Female 808/510 adapter just to see if works. They are available I just haven't gotten around to ordering one yet.

  3. #3
    Ultra Member ECF Veteran dale1962's Avatar
    Join Date
    Oct 2009
    Location
    Charlotte,NC
    Posts
    2,390

    Default

    Snow the diamonds I used 8 months to a yr ago worked great with set up I'm asking about just didn't know if they have changed since then or are they the same?Only reason I use 510 cartos is because I like the lower resistence ones 2.0ohm-1.7ohm and the lowest I believe V4l has is the wow at 2.3ohm and to me big difference in hit.I know the batt life is shorten using that low of ohm's but worth it to me,and really all of V4L batts still have lasted a long time with that setup.Would love to have a 510 batt with the carts but about everyone I have used has some kind of flaws sticky switch to numerous things,just can't beat V4L small batts just wish they offered a little lower resistence cartos.

  4. #4
    Moved On Verified Member
    ECF Veteran

    Join Date
    Jul 2010
    Location
    Boise, Idaho
    Posts
    3,755

    Default

    Do you know about the 1.5 Ohm DCT for the newer Diamonds batts....?

    World's First Dual Vertical Coil Tank by V4L = AWESOME !! (Video Review)

    The newer batts should work with 1.5 DCC....
    Last edited by SnowDragon; 02-09-2012 at 12:29 AM.

  5. #5
    Ultra Member ECF Veteran dale1962's Avatar
    Join Date
    Oct 2009
    Location
    Charlotte,NC
    Posts
    2,390

    Default

    Oh yeah I have been using dual coil cartos and tanks for sometime now they are awesome!I only use them in my high voltage PV's.Have u ever tried a 3.0ohm DC at 7.4v to me there is know better,but here again I like the big hit.But with that high of an ohm carto on that high of voltage it really brings out the flavor without scorching for me anyway.I only use auto small batts at work for hands free and I work all the time but at home its 5v and up.I am down on my small 3.7v batts thats why I would really like to know if these diamonds will work with all these 510 cartos I have.I'm sure they will with adapter but just want to make sure before I order.

  6. #6
    Idiot Guru ECF Veteran
    Supporting Member
    Morandir835's Avatar
    Join Date
    Jan 2011
    Location
    Greenbelt, MD
    Posts
    11,226
    Blog Entries
    5

    Default

    Dale sir have an answer for you, yes on all but 1.5ohm dual coil cartos. 1.7ohm+ single coils, no issue. Hope this helps.
    "Everyone loves a revolution, all the liberty they bring, everyone loves a revolution, one man's chain is another man's key, you never know what you'll get when tyrants fall... A revolution just a circle after all."- ilyAIMY "Revolutions Per Minute"

  7. #7
    Ultra Member ECF Veteran dale1962's Avatar
    Join Date
    Oct 2009
    Location
    Charlotte,NC
    Posts
    2,390

    Default

    U are taking about 510 cartos right?

  8. #8
    Ultra Member ECF Veteran dale1962's Avatar
    Join Date
    Oct 2009
    Location
    Charlotte,NC
    Posts
    2,390

    Default

    Oh and I have in past used 1.5-1.6ohm 510 DC's on the diamonds I got 8-12months ago not a big enough hit for me on 3.7v batts and just slapped one on a shorty diamond that I still have left and it does work.Like i said just wondering if they have changed the design of diamonds from back then to now.thanks,dale
    Last edited by dale1962; 02-09-2012 at 01:32 AM.

  9. #9
    Idiot Guru ECF Veteran
    Supporting Member
    Morandir835's Avatar
    Join Date
    Jan 2011
    Location
    Greenbelt, MD
    Posts
    11,226
    Blog Entries
    5

    Default

    Yes sir. Whether 510 with an adapter or 808, 1.5ohm duals coils won't fire. 2.5ohm dc did though sir. Don't have any 2.0ohm dc's lying around to test, so can't say Dale sir.

    The non-"sealed" autos works sir, along with the manual diamonds and stealths. I'm speaking only of the new vtkd autos.
    "Everyone loves a revolution, all the liberty they bring, everyone loves a revolution, one man's chain is another man's key, you never know what you'll get when tyrants fall... A revolution just a circle after all."- ilyAIMY "Revolutions Per Minute"

  10. #10
    Ultra Member ECF Veteran dale1962's Avatar
    Join Date
    Oct 2009
    Location
    Charlotte,NC
    Posts
    2,390

    Default

    My bad I didn't realize u were taking about there new titans I was taking about the diamonds....so Morandir just want to be clear before I order, boge or smktech 1.7-2.0 single coils 510 cartos with a adapter will work with the diamonds or stealths on sale now with the 50% off. Thanks man for info.
    Last edited by dale1962; 02-09-2012 at 01:40 AM.

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •