RBA comparison/Review : UVO Systems Aqua Vs Kayfun Lite
Results 1 to 9 of 9
Like Tree2Likes
  • 1 Post By lewistein
  • 1 Post By floridaBMW

Thread: RBA comparison/Review : UVO Systems Aqua Vs Kayfun Lite

  1. #1
    Full Member Verified Member
    Supporting Member
    lewistein's Avatar
    Join Date
    Oct 2012
    Location
    INDIANAPOLIS
    Posts
    49

    Default RBA comparison/Review : UVO Systems Aqua Vs Kayfun Lite

    I wanted to get into RBA's with tanks after purchasing my first RDA the IGO-W. I was blown away by the vapor I was able to achieve, but hated dry-hits every 10 or so. Being serious about getting legit equipment, I didn't want to do clones. After great recommendations from Thrasher, I opted for the Aqua for it's dual coil build and a Kayfun Lite for it's massive tank and general popularity of the Kayfun models. I've been vaping on both constantly for a couple weeks now and really loving both, Here's my breakdown of the pros & cons.

    Aqua: Dual coil building is great. Threads are awesome. Airflow is sick. Design & Threads are perfect. Dig the hand-tightening screws for builing CONS: Leaks:Took a while to get filling down and once I switched to cotton rather than ecowool it hasn't been an issue. Tank size is a bit small. overall a little messier when rebuilding/assembling.

    Kayfun Lite Plus: Build is top notch. Tank is massive. Clear chamber to see how much liquid is handy. Aiflow screw is handy. CONS: Filling with the screw in the bottom is a bit of a pain on the go, but I fill from the top if I'm needing to without trouble. Wish I could dual coil build on it. Love my ohms to be right around .8 Vaping this on my Provari 2 at 1.6 ohms at 4.3 volts right now but suprisingly it produces almost as much vapor as the Aqua at .83 on my Smoktech magneto.

    Flavor is almost identical, but I would give a small edge to the Aqua.

    Very pleased with both. I had originally planned to see which I liked best and then sell the other, but even though I'm in the hole almost $300 for the two of these combined, It's VERY worth it for the best vaping experience you could ask for.

    unnamed.jpg
    Last edited by lewistein; 12-27-2013 at 04:09 AM.
    Glenn_K likes this.

  2. #2
    Super Member Verified Member
    ECF Veteran
    floridaBMW's Avatar
    Join Date
    Sep 2012
    Location
    S. Florida
    Posts
    583

    Default

    Thanks for the short review. I am a Kayfun junkie, a gennie and dripper r set up but the KF is my all day equipment. I recently picked up an Aqua and Origin from the classies and am super psyched. I am not loving the tank capacity either but dual coil at .8-.9 sounds like juicy vaping. Thanks again

    Ken
    lewistein likes this.
    Ken
    _____________________

  3. #3
    Full Member
    Join Date
    Jan 2014
    Location
    Nashville TN
    Posts
    52
    Blog Entries
    12

    Default

    Does any place having these in stock? I'm having trouble finding them in stock.

  4. #4
    Full Member Verified Member
    Supporting Member
    SoaFung's Avatar
    Join Date
    Oct 2013
    Location
    Amarillo, TX, USA
    Posts
    68

    Default

    101vape.com

    Sent from my Nokia Lumia 920 using Tapatalk

  5. #5
    Full Member Verified Member
    Join Date
    Mar 2013
    Location
    Kentucky
    Posts
    101

    Default

    So does the KFL not do well at sub-ohms? Why not just coil a .8ohm single coil on the KFL?

  6. #6
    PV Master Verified Member
    ECF Veteran
    crxess's Avatar
    Join Date
    Sep 2012
    Location
    Williamsport Md
    Posts
    8,930
    Blog Entries
    3

    Default

    ummmm........... The Provari will say........NO GO!
    Smoke free since 08/06/12 for my loving Wife, our Children and Grand Children
    Someone has to pay the bills - lol


  7. #7
    Senior Member Verified Member
    ECF Veteran
    Don Kaluminati's Avatar
    Join Date
    Sep 2012
    Location
    Washington
    Posts
    153

    Default

    Try dual vertical coils my aqua spanks my kayfun... Also try closing the juice and air flow then inverting the aqua when opening/closing it for refills. Don't fill past the threads... Agreed fluid capacity blows compared to the kayfun.

  8. #8
    Full Member CasketWeaver's Avatar
    Join Date
    Feb 2014
    Location
    Colorado Springs, CO 80909
    Posts
    91
    Blog Entries
    1

    Default

    Quote Originally Posted by Muero View Post
    Does any place having these in stock? I'm having trouble finding them in stock.
    I found that for the Kayfun Lite+ - the ONLY place I was able to find it "IN STOCK" was at www.cloud9vapor.com

    Everywhere else listed "OUT OF STOCK" or "ON BACK ORDER" or something close to those two. My cloud9vapor (C9V) order has arrived on US soil - but not delivered yet. So with the order being placed on 2 / 2 / 2014 and already being in the states - that's a pretty fast dispatch. Granted it took them a day to process, but, at least it arrived on US soil. If asked how much I spent at C9V - lets just say I bought the Kayfun Light+ and the PV Cone.

  9. #9
    Full Member Verified Member
    ECF Veteran
    lebeatnik's Avatar
    Join Date
    Dec 2012
    Location
    San Diego, California
    Posts
    113

    Default

    I cant say i like one more than the other as currently i only have the AQUA I was in the market for a kayfun and then saw the AQUA had dual coils so i decided i wanted that as you can in fact use it with one coil so in my mind it was the better option. I like my dual coils from .7 at the lowest to .9 at the highest my build right now is a bit high being about .95 at build IDK what it is right now because the wire has broken in. My curent build is a 30g dual coil 12 wraps on each side lotsa surface area and heats up quickly. Thats Also on An Origin Mod in Hybrid mode.

    About Filling I ALWAYS fill it from the bottom supposed to fit 3 mls that way IDK i use a dropper and it takes 3 full droppers full, Also this way you can also check out your build maybe tweak it etc, I believe the method i am trying to explain is the normal way to fil a Squape. check it out online once i started to fill this way no leaking and less filling.

    Aqua pros: Dual coil
    Ajutable airflow
    Ajustable Juice feed
    Does not leak
    Runs in hybrid mode (which is AWESOME)

    Aqua Cons:
    21mm Diameter (i use it with origin so issue for me, although its not flush on most 22 mm mods but its a 1 mm difference I have only heard this complaint)
    Small tank which i am always afraid i will not think and burn my wicks and have to rebuild, would like a clear option
    The area you have to work with is small and being a dual coil tank its difficult to capture the wires (capturing 2 wires on each post) having slotted posts or holes in the posts would make it much better

Tags for this Thread

Bookmarks