Video Review - Joye-510 from E-SmokeyTreats

[enrogae]

Thanks for the review Terraphon. As a result of it I just ordered one from e-smokey treats. Tell Phil to give you a discount for referring a customer.

It didn't seem that he had any atomizers/batteries for it, however. Know a good place to get those...or if there are any other models that fit the 510?

[Terraphon]

He should have batteries, atomizers, pcc's etc...in stock within the next couple of days, from my understanding.

[enrogae]

Good deal. If I like the device as much as I think I will, I am going to need to order all of the above.

[Terraphon]

Oh, I'm sure you will.

I'm having trouble using anything else right now.

[SKYYcamel]

OK, I need some help here. I have a Dura-C with the manual battery. I also have the Janty PCC for my Dura-C. I enjoyed my Dura-C so much, I ordered a Joye 510. When i received my 510, I was dismayed to see that the battery wouldn't fit in the Janty PCC because the battery switch sticks out alot farther. My question is, do the PCC's that Phil sells accommodate the larger switch or are they the same as the Janty PCC? Thanks in advance for any help here.

[SKYYcamel]

I forgot to mention that the battery WILL fit into the PCC, but the LED comes on because the switch is being depressed by the PCC. Thanks again.

[Terraphon]

I have been told that the PCC from EST is made for the manual switch.

[Wench]

Thanks for the review I have 1 on the way now from E-smokeytreats. I got one of the usb passthroughs to go with it also. So hopefully I will be ok on batteries *cross fingers*

[Terraphon]

I think that's going to be my next goodie...a passthrough would be awesome on the 510.

[gatsby]

Originally Posted by SKYYcamel

OK, I need some help here. I have a Dura-C with the manual battery. I also have the Janty PCC for my Dura-C. I enjoyed my Dura-C so much, I ordered a Joye 510. When i received my 510, I was dismayed to see that the battery wouldn't fit in the Janty PCC because the battery switch sticks out alot farther. My question is, do the PCC's that Phil sells accommodate the larger switch or are they the same as the Janty PCC? Thanks in advance for any help here.

I had the same issue with an old style PCC. Just unscrew the two screws and use a good sharp utility knife to cut the thin part of the plastic insert between the slot used to charge the battery and the metal edge of the PCC (it is obviously the easiest part to notch). When you get it apart you should see what I mean. It is enough space for the newer manual batteries with the higher button. Be careful with the short screw it doesn't actually thread in and requires a little pressure from behind to pop out.