HI DEF PCC Titan Charging Case Review - Page 5 - e-cigarette-forum.com • The place for electronic cigarette reviews, news and chat

Finster · 04-24-2009, 04:44 PM

Thats to bad the manuals are great, maybe the hole could be modded shaved out alitte

frogbmth · 04-26-2009, 06:45 PM

That wouldnt work as the switch is not the only problem. The manuals are longer than the auto so the lid won't close unless you are happy to bend it.

Janty's answer is to introduce a new manual batery in a few weeks that will fit the PCC.

DaDuke · 04-27-2009, 07:14 AM

I looked again and now the Janty site is saying that the PCC works with the dura-c which is manual if i'm not mistaken.

Quixotic7 · 04-30-2009, 02:32 AM

I got my PCC today and can confirm it works with the short manual batteries. The hole is just wide enough that it doesn't click the switch, if it does click it, you hear a distinct clicking sound, which you can test by wiggling the battery around in there. Solidly built, although the flip top seems slightly strange. It's indicator light is really nice to know when my battery is fully charged. I'm color blind, and I don't know if it's just me, but with the plug in chargers, the light always looks green. With this, the third light turns a bright, screaming green when the pcc is charged, and the first light is red when a battery is not charged, and the light turns off once the battery is fully charged. It's wonderful!

igetcha · 05-14-2009, 09:42 PM

hey guys,

for those who have the PCC that wont charge the manual batteries.........watch this vid i made!

YouTube - PCC MOD FOR TITAN E-CIG MANUAL BATTERIES

charges my manual batteries perfectly now!

cheers,

scott

SavePaperVapor · 06-02-2009, 01:53 PM

I made a very easy mod for the newer PCC with the manual batteries. I can't vouch for everyone, but my PCC does have the groove at 7 o clock. The manual batteries slide in nice but the problem I had was length. When I closed the case it didn't push the batteries down far enough in to charge. What I did was take a pool cue tip, trim it down to the needed length and gorilla glued it to the door where it meets the battery.

I haven't read of anyone else having this problem so maybe I just got a unit that was a touch off. However, if anyone does have this problem a cue tip works great. I shaved it down to about 1/4 inch (1.2cm).

viachy · 06-03-2009, 06:27 AM

Sorry for this question but the PCC only charges 1 battery at a time ?

igetcha · 06-03-2009, 07:16 AM

Quote:

Originally Posted by viachy

Sorry for this question but the PCC only charges 1 battery at a time ?

yes mate, thats correct.

but really, you only need one battery if you have the PCC. every time you finish vaping, store it in the PCC and next time you use it you have a full battery again!

cheers,

scott

igetcha · 06-03-2009, 07:19 AM

Quote:

Originally Posted by SavePaperVapor

I made a very easy mod for the newer PCC with the manual batteries. I can't vouch for everyone, but my PCC does have the groove at 7 o clock. The manual batteries slide in nice but the problem I had was length. When I closed the case it didn't push the batteries down far enough in to charge. What I did was take a pool cue tip, trim it down to the needed length and gorilla glued it to the door where it meets the battery.

I haven't read of anyone else having this problem so maybe I just got a unit that was a touch off. However, if anyone does have this problem a cue tip works great. I shaved it down to about 1/4 inch (1.2cm).

thats a good idea mate!

viachy · 06-03-2009, 07:42 AM

Cheers Scott,

The problem is that I noticed that I`ve started vaping a lot recently and I mean almost all the time

. So I really hope that 1 charging slot would be enough...

I purchased the 510s to be able to go clubbing with them (see the signature) - still waiting actually.

I have not purchased a PCC yet as David Yang did not have them yet but might purchase one with your discount code

I was looking around for a good deal on those PCCs

04-26-2009, 06:45 PM	#42
frogbmth ECF Veteran Join Date: Feb 2009 Location: Dorset, UK Posts: 1,012	That wouldnt work as the switch is not the only problem. The manuals are longer than the auto so the lid won't close unless you are happy to bend it. Janty's answer is to introduce a new manual batery in a few weeks that will fit the PCC. __________________

04-27-2009, 07:14 AM	#43
DaDuke Full Member Join Date: Apr 2009 Posts: 36	I looked again and now the Janty site is saying that the PCC works with the dura-c which is manual if i'm not mistaken. __________________

06-03-2009, 06:27 AM	#47
viachy Senior Member Join Date: Apr 2009 Location: Sofia, Bulgaria Posts: 288	Sorry for this question but the PCC only charges 1 battery at a time ? __________________ Happy Vapers HERE =)

06-03-2009, 07:42 AM	#50
viachy Senior Member Join Date: Apr 2009 Location: Sofia, Bulgaria Posts: 288	Cheers Scott, The problem is that I noticed that I`ve started vaping a lot recently and I mean almost all the time . So I really hope that 1 charging slot would be enough... I purchased the 510s to be able to go clubbing with them (see the signature) - still waiting actually. I have not purchased a PCC yet as David Yang did not have them yet but might purchase one with your discount code I was looking around for a good deal on those PCCs __________________ Happy Vapers HERE =) Last edited by viachy; 06-03-2009 at 07:47 AM. Reason: Too many typing errors

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-24-2009, 04:44 PM	#41
Finster Full Member Join Date: Apr 2009 Posts: 29	Thats to bad the manuals are great, maybe the hole could be modded shaved out alitte

04-30-2009, 02:32 AM	#44
Quixotic7 Full Member Join Date: Apr 2009 Location: Salt Lake City, Ut Posts: 88	I got my PCC today and can confirm it works with the short manual batteries. The hole is just wide enough that it doesn't click the switch, if it does click it, you hear a distinct clicking sound, which you can test by wiggling the battery around in there. Solidly built, although the flip top seems slightly strange. It's indicator light is really nice to know when my battery is fully charged. I'm color blind, and I don't know if it's just me, but with the plug in chargers, the light always looks green. With this, the third light turns a bright, screaming green when the pcc is charged, and the first light is red when a battery is not charged, and the light turns off once the battery is fully charged. It's wonderful!

06-02-2009, 01:53 PM	#46
SavePaperVapor Senior Member Join Date: May 2009 Location: Minnesota, USA Posts: 168	I made a very easy mod for the newer PCC with the manual batteries. I can't vouch for everyone, but my PCC does have the groove at 7 o clock. The manual batteries slide in nice but the problem I had was length. When I closed the case it didn't push the batteries down far enough in to charge. What I did was take a pool cue tip, trim it down to the needed length and gorilla glued it to the door where it meets the battery. I haven't read of anyone else having this problem so maybe I just got a unit that was a touch off. However, if anyone does have this problem a cue tip works great. I shaved it down to about 1/4 inch (1.2cm).