Lavatube v2 is here!!!!!
Volcanoecigs is proud to announce the release of the NEW LAVATUBE v2
Attachment 154997Attachment 154995Attachment 154994Attachment 154998Attachment 154996
Device only: The most advanced variable voltage electronic cigarette
Kit: The most advanced variable voltage electronic cigarette
Variable Voltage Vaping with Volcanoecigs.
Say hello, again to the all new LAVATUBE Version 2! It's time to to take your vaping experience to the next level with a device tuned like no other! The all new LAVATUBE Version 2 is a specially designed variable voltage electronic cigarette that provides you with anywhere from 3 to 6 volts of vaping power with the easy click of a few buttons. Our team spent many months designing this device and there are many high tech features that separate the LAVATUBE Version 2 from the crowd. Here are the full set of specs:
LAVATUBE Version 2 Features:
- Lightweight aluminum alloy body- unscrews in the middle to open (no more end caps)
- Anodized aluminum finish
- 1- power / activation button with 5 click on/off feature
- 1- Voltage up button
- 1- Voltage down button
- Ohms indicator
- Battery charge indicator
- 1- Bright blue LCD screen
- 1- 510 threaded connection
- 1- Lanyard clip
- 1- Heat spring
- 2- vent holes
- 18650 and 18700 battery compatibility
- Dimensions 5" long by 1 1/8" in diameter 127mm long by 28mm in diameter
- 5 color options: Matte Black, Gun Metal Gray, Metallic Red, Metallic Blue, and Metallic Pink.
- Selectable Voltage Range: 3v to 6v in 0.1v increments
- Power / Activation Button: Click five times fast to power the device on / off; Hold the button down to activate.
- "+" Button: On press, increases voltage by .1 increments between 3 volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts
- "-" Button: On press, decreases voltage by .1 increments between 3 volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts.
- Regulated Output: Advanced pulse-width modulation power output with accurate voltage settings tuned to Vrms
- Auto Shutoff: If the activation button is held down for 15 seconds or longer, the LAVATUBE Version 2 will shut itself off until the button is released to prevent overheating the atomizer and the device.
- Short Circuit/Atomizer Protection: The LAVATUBE Version 2 can recognize an atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and atomizer. If the atomizer is too low or shorted out it will shut off power to the device to protect the LAVATUBE Version 2 from being damaged.
- Reverse Battery Protection: Protects the device in case you put the battery in the device backwards
- Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically display "LO" on the display and turn off when the battery is discharged, preventing damage to the battery and the device by overly depletion.
- Battery Voltage Meter: The LAVATUBE Version 2 has a voltage meter built in, simply press and hold the - button for 5 seconds and it will display the voltage of the battery. This way you can monitor the power left in the battery before it needs to be recharged. 18650 batteries provide 4.2v at peak charge and over the life of the battery that voltage will decrease to about 3.2v level before needing to be recharged. This will help you monitor the life cycle of the battery.
- Ohms Indicator- The LAVATUBE Version 2 has a ohms indicator built in, simply press and hold the "+" button for 5 seconds and it will display the ohms of the atomizer/cartomizer attached to the Lavatube v2
- Heat spring will collapse if the battery gets to hot or delivers too many Amps if the battery shorts out.
- Amperage Limiting: 3 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.
- Vent holes: 2 Vent holes on the bottom of the device for added safety
- Lavatube v2 (device only)- $79.99
- Lavatube v2 Kit- $139.99
The LAVATUBE Kit Includes:
- (1) LAVATUBE Version 2 in the color of your choosing
- (1) Black cushioned LAVATUBE carry case
- (1) AW IMR 1600 mAH High Drain 18650 rechargeable LiMN battery
- (1) XTAR WP2 II multi-charger
- (1) 7ml Chrome Tube Tank Vapor Delivery System with 3.0 ohm cartomizer and plastic drip tip
- (1) 15ml Bottle of USA-Made Premium eLiquid in the strength and flavor of your choosing
*Special LAVATUBE Warranty Information:
The LAVATUBE Version 2 unit will include a 1 Year Limited Warranty against any manufacturing defects from the date of purchase.
The AW IMR 1600 mAH High Drain 18650 LiMN Rechargeable Batteries will be warrantied for 90 days from the date of purchase. Please make sure to fully charge your batteries in-between use and to follow safe storage practices when they are not being used.
Last edited by JoeInferno; 12-03-2012 at 12:22 AM.
I ordered a blue one. But I think they all look good.
congrats on your new Lavatube v2... now the pee pee dance begins waiting for the mail man, or FedEx man.
Let us know what you think when you get it.
I went for basic black, but I keep staring at the other colors and feeling a twinge of regret...
its like pokemon.... got to collect them all......LOL
Nice!... and the kit looks well built also with the Xtar charger and AW batteries.
Thank you, we try to make sure the kis have the best stuff in them and everything a vapor needs to get going.
It only makes sense to put a great charger and battery in the kit to match the great device. A poor battery or charger could make even the best device not so good.
Just bought a black one with the kit to boot. Congrats, Joe, and good timing! It's serendipity that this just got released just after my current PV is on its last legs after it had a rather nasty fall earlier today. I have all the more reason to do the Fedex pee pee dance.
Glad to hear you got your order in. We are so glad to have it up on the site now. Its been a long road getting here, but it was worth it. We took some grief for the delays, but they were worth it to bring a great mod to market.
Tags for this Thread