I've been looking at 26650s lately for a viable contender for sub-ohm
vaping, and this is what I've found. You can get them from rtdvapor, so I trust them as much as they can be trusted.
Behold, the KeepPower 50A* 26650
*Just an FYI on the KeepPower 50A 26650s - Short version, Max Continuous Draw is 30A not 50
Specs from KeepPower's website:
1. Typical Capacity: 4200mAh (0.2C Discharge)
2. Minimum Capacity: 4100mAh (0.2C Discharge)
3. Nominal Voltage: 3.7V
4. Standard Charge: CC/CV,1000mA, 4.20V
5. Standard Charge Time: 2hours
6. Maximum Charge: 6A
7. Full Charged Voltage: 4.20V±0.05V, 50mA end-off current
8. Discharge End-off Voltage: 2.50 V
9.
Max. Plus Discharge Current: 50.0A
10.
Max. Constant Discharge Current: 30.0A
11. Initial Impedance: Max. 25mΩ
12. Weight: Approx. 90.0±1.0g
13. Dimension(D*H): Max.(D)26.20mm*(H)67.50mm
14. Operating temperature
Charging: 0℃~45℃
Discharging: -20℃~60℃
15. Storage temperature
1 year:-20~25°C
3 months:-30~45°C
16. Life: Over 2000 times charge & discharge cycle life
17. Cell technology: IMR
18. Vendor link:
http://www.keeppower.com.cn/products_detail.php?id=486
Hope this helps you guys out... I cannot attest to any issues in fit with any specific
mods at this point.
Disclaimer: What you do with/to this battery is up to you. I remain irresponsible for any damage that ensues from negligent usage!