Doggy style RTA

This is an RTA designed similar to the Siren GTA (Genesis tank Atomizer).

The build deck is sort of in the middle about 6-8 mm above the bottom and tails go down to the bottom of the atomizer.

The atty is 28 mm tall not counting drip tip and 510 pin.

There is one airflow opening 4x1.5 mm direct lung vaping. If you close down the AFC to barely a sliver you can force it into MTL.

Flavor is quite good.

Single coil Atty

Problems.

You have to trap leads under screw heads, and you need a flat head screwdriver.

You have to use 2.5 mm coils to fill the juice wells or you will have flooding issues

You have to raise the coil quite a bit or it will touch the screw heads.

Don't know how much this holds exactly but would guess 3-3.5 ml.

The AFC spins and spins. I would recommend removing the AFC ring so you can grip the base when removing atty. You don't want to accidentaly unscrew the cap from the base.

The chimney is one piece so wicking and making sure you don't have a short may be an issue.

I got this to try it out. I'm glad i did..another good atty for the vapocalpse.

Recommended 4.5 stars
  • Like
Reactions: RainSong

Comments

Thanks for your review Bear. Sounds tempting since I do enjoy single coils. Appreciate your time, in giving us good info.
 

Blog entry information

Author
Two_Bears
Views
997
Comments
4
Last update

More entries in ECF Blogs

More entries from Two_Bears