Tip for users with a Bliss or Hellfire Mega/Mini (Genesis style running dual coils)

So i got my bliss in yesterday and have been playing with some configurations and wanted to give a little tip for those of you with hellfires and bliss genesis atomizers..


As you know theres 3 holes (up to 4 holes by a removing screw leaving one negative post) in the bliss. The first setup i tried was a 2 wick dual coil setup on opposite sides of the positive post (lining up with the 2 opposing air holes) and this setup worked pretty well.. So today i tried a curved wick without much success because for some reason i cant roll anything higher then 1.0 ohms even with a 6/7 wrap with 30 or 32g kanthal going to order some 24 and maybe have a bit more success with a single coil .. But anyway.. I took the curved wick out and accidentally put both of the wicks sided by on one side of the atomizer leaving the air hole dead center between the 2 wicks on one side and no wick on the other side.. and WOW did it add a great blend of throat hit and flavor having one air hole in front of 2 coils and one air hole opposite side the wicks..


WIth this setup i got a much sharper flavor and a much crisper throat hit.. Give it a go.. ON the BLISS its the only setup ill use from now on..


Heres a picture of what it looks like..


TOP VIEW (Before i had the wick thats to the right side of that top screw in this picture, in the hole on the left side of that top screw making it polar opposite to the wick on the right side of the bottom screw in the picture which lined up with the polar opposite air holes on the cap)
2hq9yms.jpg



Front View (No cap side by side wick instead of opposing wick)
15dkmiw.jpg



Front View with cap (showing air hole center of 2 wicks)
24682ev.jpg

Comments

Blog entry information

Author
jcwest
Views
473
Comments
4
Last update

More entries in ECF Blogs

More entries from jcwest