Blog entries by Hitmetwice

3mm cotton yarn, 4 strand, 1 strand=0.75mm 1mm cotton string, 4 strand, 1 strand=0.25mm (of course doubling over the 1mm string would work too. I'd advise to untwist the braid first though) Using 1 strand of each equals 2mm. when doubled over the folded piece on kanthal(used for threading the...
The inside diameter of the 2.5ohm coil is 1.4-1.5mm. Using one strand of 4 strand 3mil. yarn doubled over a folded piece of kanthal for threading through the coil is working better than the original equipment.imo. No flooding, no burning at 4 volts power hitting it. Wicking is better than ever...
This is for V3 units but may loosely apply for earlier versions also... Found that after the unit got torqued a bit, in my pocket, I noticed that the center post was no longer lining up nicely with the drip tip. I discovered that replacing the tube was the remedy for this but on further...
This works with the vivinova heads as well. What you'll need... An old replacement head. Plus.... 1mm. and/or 3mm. Cotton wicking material(1mm.string or 3mm. yarn) Three to four inches of kanthal or nichrome wire, or similar (for threading the cotton through the coil) Electronic screwdriver...
Stardust 2.0(V3) started seeping e-liquid onto the top of my battery through the center post the other day. I've been cleaning, dryburning, replaced the silica wick with cotton(a few times) and been using it for weeks now(same head). I figured it was at the end of it's life and was still...