Continued from Part-1...
3(c) - Then just tuck both ends into the deck well.
Step-4: Test your build.
4(a) - Saturate the wicks.
4(b) - Check resistance once again (notice it remains the same).
4(c) - Vapor Test.
Step-5: Assemble the system.
5(a) - Fill the Tank.
5(b) - Attach the...
The New Kayfun Lite (2019) is worth every penny. What with it's size, simplicity, ease of setup and refilling. Then the wonderful vape of an expected KFL that we get out of it. I have reviewed it >here<. And also shown a simple-single coil build >here<.
Now it's time for another easy, but...
The Big Brother of Aqua !
What is it?
This is a take on the Aqua, a dual coil design Kayfunish SRTA (Silica based Rebuildable Tank Atomizer). Done better due to its wider girth ~ thus more deck real estate, thus easier to build and intakes more juice. And no, this version of the Fogger is NOT...
Time to Re-coil and Re-wick!
Twisted Microcoil and Cotton
The coil was already three months old, so while rewicking I thought of replacing it altogether. Here’s a look at the old coil and the new:
Coil Closeup and Placement:
Coil Test Fired:
The Wick√
Wick Position on Deck:
Build...
Build PICTORIAL
Microcoils Prepared and work layout:
28AWG Kanthal, 11 wraps on Toothpicks. Pre-Twisted the coils to each other for ease of mounting
Coils Mounted on the Deck:
Tip: Keep the coil head upwards, with the tails at the lower plane while mounting. This helps in correctly...
Wow! Love the Aqua!
The Microcoils
Testing the Microcoil
Placement of the Wicks
Juiced up, Check Ohms and Vapor Production!
Wow, the Vapors!
Performs mind bogglingly gr8!
Why do NR-R-NR in CE2 type setups?
It's all about heat dissipation. We all know about "Hot Legs" (HL) and "Hot Spots" (HS) right? They are the bane of our builds. Will get you metallic taste, poor VTF* and nil or low vape satisfaction.
In a regular SRTAº the coil rests in close proximity to...
How To: SS Mesh Wick with Twisted Coil in Spheroid...
Had pondered over it for a while and upon receiving my second Spheroid - gave it a try. Two things took me to it - (A)had plenty of mesh lying around since I have given up on Gennys for good, and (B)curiosity!
EVERYTHING LAID OUT:
A piece...
Double Decker : Doubled the Pleasure!
How To: Twin Micro-coils on Kayfun Lite
1. KFL WASHED-UP AND WORKSPACE ARRANGED:
Attention: Don't ever forget the Multimeter. This is your 'most important' tool at rebuilding!
4. COIL PLACED AND SQUEEZED:
Note: The real benefits of a Micro-coils come out...
K-Lite setup with Hemp Twine
3mm Hemp Twine, Single strand 4cms long, 28AWG Kanthal, 7 wraps, 1Ω Coil
TRIM WICK ENDS:
Cut the wick ends to 1cm each. Effective wick size: 3cms.
PREPARATION:
Hemp is a natural fibre with awesome wicking properties, which also lasts long. However, when wet, it...
Setup with a 'Twisted Nano-Coil' and 'Cotton Wick' for a *BANG*!
Well, this is one of the finest attys I have used. Very similar in vape to my Kayfuns. Tad finicky setting up due to the non-collapsible deck lips (the Taifun-GT has) but not a deal-breaker at this price-point.
The coil & wick it...
The Sirius II, from Vape Art, Greece
USER REVIEW
A Top-Firer, 21mm fully Mechanical Stainless Steel Mod, with some nice aspects to it! I received it recently and had been extensively using it. The more I play with this device - the more I seem to like it; and thus thought of sharing my opinion...
The GP PAPS v2.5 LUX is more than a Mod could be :)
Having 'obtained' it in the 1st batch and since playing with it 24/7 (incidentally my Serial# is 0247), I find the GP-LUX miles ahead in concept and design. Both minimalist and simplistic (Perseas says, "less is more"), however manufactured to...
Joyetech eRoll
An amazing e-Cigarette, probably the best "Cig-a-Like" to start our vaping journey with…
What a New Vaper Needs?
There are many pros to possessing an APV as a starter kit. Member Baditude explains it well in his Blog, "A Good Starter Kit". However, the fact remains that a good...
Wire-Welder Piko3 : User Review
What with the bunch of NR-R-NR Attys in my coterie viz. the Diver, Killer705, Oddy and the Ithaka, it had become a pain to manually join those two wires. I thus, soon realized that a TSAF/Zapper styled wire-welder was inevitable. So, went on a lookout and...