The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Blog entries by MyMagicMist

  1. Been realizing that I've come to a point where the gear is set. That means I'm not really seeing much "new" gear which tickles a fancy. Might buy another Reo grand clone, maybe one or two more Pico Squeezes. Not sure if I want any more Coppervape mods or not. I might consider a nicely done...
  2. Kit My current kit list. Thought it would be good as a link to a reference for folks. This way I only use one link in the signature line, yet still, convey the information. A piece of opinion here regarding clones or styled after original works, I do not consider it theft to use these. I...
  3. DIY MIXING FORMULAS Please see this at My Yellow Pad. ======== Liter Math For anyone who wants the easy math to determine how long a liter would last, here it is: mls per day x strength = Y 1 liter of 100mg strength = 100,000 mgs 100,000 / Y / 365 = # of years a liter will last (assuming...
  4. Recently got into squonking. v.gd - Shortened URL is the kit I bought to start. It my first in using a mechanical mod. It is also the first I have had need of building coils for a deck. I am also having first use of rayon as wick material. My wife located v.gd - Shortened URL for me to try the...
  5. Originally called the recipe below simply melon berry. I am going to rename it now to Strawberry Shine. It will now become one I will seek to keep on hand, along with Hawk Sauce. In fact it may even replace Hawk Sauce, as an ADV. Strawberry Shine Strawberry 5% Watermelon 3% Extreme Ice...
  6. Have a 2.3ohm coil in a T-Dux 3.0 tank. This is soaking up Whiskey Bent juice at 12mg per ml. I am hitting it at around 10.5 P. according to the mod's read out. Looking at a handy wallpaper with the formulas of Ohm, I see the 10.5 is more likely actually 9.2 P. P = E(sq)/R is the formula I used....
  7. On the 16 th of this month I happened to have been at father-in-law's house. I had laundry to do and also took in a few wheelbarrow loads of firewood to the porch. As life and happenstance often do, a curve ball came whizzing by. I had left my vaping gear up here at the house. Asked him to bum...
  8. Modest & Simple Vaping Suffice it to say I got started vaping using cig-a-likes, Enojy & Blu types. The Enjoy may have been a bit more affordable. Still both products seemed to bind me as a consumer to their product line. And that product line did not suit me well enough. The battery life was...
  9. English Let us treat everyone with equanimity and revere the Golden Rule. This way we shall attain peace with, or without leaders. Our leaders now, if good face powerful evil leaders, are hindered in many ways from doing good. It is to us to make good. Russian Давайте относиться ко всем с...
  10. Made it through last month without a single cigarette. Let me repeat, I made it through last month without a single cigarette. I now vape only. Feel all the better for it, too. Now, to weening myself down on the nicotine, if I can.
  11. Have written here about a friend loaning me his old RSST RBA. We had both checked it out and could not determine what errors were going on with it. This afternoon, I took it back out and jiggled round with the coil and center post a little. It is still a bit persnickety but it works now. Well,...
  12. Re: Smok T-Dux series--why is it not popular Dislike being a me too, although I agree that lacking air flow control seems a consistent issue for Smok. Think the T-Dux 4.0 would be elevated to great status if it had air flow control. Maybe Smok's users ought to ask for a suggestion thread here...
  13. Today I kept getting check atomizer to light up. I was using the RSST with a 1 ohm coil a friend had built. Today was not the first but it was the last, I decided. Out to his kit I walked. I stripped of the coil he built. Then I used a wide bore needle from a syringe to wrap three to four...
  14. T-Dux 4.0 going through coils Have a friend who has taken these coils apart and rebuilds them. He suggests using care when removing the metal housing. You need to pull it straight off to avoid cracking the ceramic cup. He rebuilt one as a single coil and then did one as a dual coil. I used them...
  15. Friend today let me borrow his RSST. He wrapped a ~1ohm build 28ga Kanthal coil round some Ready-X wick on the deck. I'm hitting on Hell Bent flavor juice at 6mg nicotine. I'm using the MVP 2 to push it at 10W. Now, I know I will be buying an RSST for myself. Friend has said I may use his as...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice