Buying original 24mm Profiles only, no 1.5 please.
Any cap or color.
PC caps highly desired.
Thanks

Well at least someone is aware that it didn't magically burst into flames..

Decadent - Lime Zinger
Packaging: 10ml aroma
Decadent Vapour - England
Recommended blend ratio: 10-20%
Setup: Single DL RTA, 27W, 70VG-30PG
Once again I have a very pleasant flavour from Decadent Vapour, a citrusy lime zinger with notes of zest. The flavour has a very strong lime aroma that really smells like real fruit. It tastes like a simple flavor, which is not just about the lime, but about the soda, limey, fizzy sensation that the flavor gives you. The lime is a bit sour, not bitter, with a hint of sweetness that gives it a lemony effect. You can feel the soda part of it on the exhale, it really does feel like you're bubbling in your mouth with all the bubbles. It feels fresh, but there's no cooling. The special oily taste of the lime almost clings to the roof of your mouth, which you can feel for minutes afterwards. Its more acidic taste gives you a summery taste to enjoy all day long. You get about 60ml of finished liquid at the recommended mixing ratio, which is good value for money. After steaming this amount, the cotton wool remains snow white, so it can be used in an atomizer tank. All in all, you get a delicious lime lemonade with a pleasant refreshing acidity. It's definitely worth a try for fruit lovers, I think you won't be disappointed.

Hello and welcome once again folks for another review, today's review is on a upgrade in my opinion to the LUXE X which had replaceable Pods instead of replaceable coils which for some folks was more convenient than replacing individual coils. Vaporesso realized that there's another half of the crowd that would rather change coils than change pods and came out with what today's review item is, the LUXE XR. This upgraded as I call it has a power out put of 40 watts and houses a internal 1500mAh battery and the ability to vape either MTL or RDL just as the original LUXE X does, there is only one button and it it's function is to fire the device and power it on and off, all wattage/voltage is controlled automatically by the AXON chipset depending on what coil is installed, and speaking of coils it uses the great GTX coils that are the 0.4Ω mesh coil at 32 watts and the 0.8Ω mesh coil at 16 watts. I'll tell you my findings on this upgraded kit later in my review but first lets see what the LUXE XR is all about.




COLOR CHOICES





IN THE BOX


*1pc Vaporesso Luxe X Battery

*1pc Vaporesso Luxe XR Pod (RDL)

*1pc Vaporesso Luxe XR Pod (MTL)

*1pc Vaporesso GTX 0.4ohm Mesh Coil

*1pc Vaporesso GTX 0.8ohm Mesh Coil

*1pc Type-C Cable

*1pc User Manual & Warranty Card

*1pc Reminder Card



FEATURES

• 1. Built-in 1500mAh battery with 40W output
• 2. COREX heating tech for accurate flavor
• 3. Adopts AXON Chip with smart control
• 4. Abrasion/stain resistant coating and PCTG tube
• 5. Auto lock the device after 8S pressing
• 6. Secured mode to avoid accidental misfiring
• 7. Designed with 3 LED lights to display
• 8. Futuristic design, crystal and solid body
• 9. Adopts SSS leak-resistant technology
• 10. 5ml e-juice capacity, easy bottom filling
• 11. Fit for Luxe X 0.4Ω/0.8Ω Pod, Luxe XR RDL/MTL Pod, GTX 0.4Ω/0.6Ω Coil (RDL), GTX 0.8Ω/1.2Ω Coil (MTL)

View attachment 982915


PARAMETERS AND SPECIFICATIONS







ANTI LEAK AND NO MESS





MTL OR RDL WITH GTX COILS

Zovoo B5000 // Review by HyDrOpOnIc1987

Hello, and welcome to another of my reviews. Today I will be telling you about the B5000 line of disposables by Zovoo. I was graciously sent a few pieces to test and review from Fiona at Zovoo. For those of you like me that were unaware, Zovoo is a sister company of Voopoo dedicated to disposables. I hope to be able to provide a fair and honest review. So, let's get to it.

Promotional Images and Information







Features:
Cute and Compact
Uses a mesh coil for better flavour and an instant hit
Lasts for 5000 puffs
Rechargeable via USB-C (cable not included)

Flavours:
1. Peach Mango
2. Mint Twists
3. Blue Razz Ice
4. Strawberry Ice Cream
5. Aloe Grape
6. Watermelon Lychee
7. Kiwi Passion Fruit Guava
8. Vanilla Cream Tobacco
9. Pina Colada
10. Fruit Slushie

Package Contents:
1 Device (in a wrapper for freshness)
1 leaflet with warnings.

Unboxing and Usage Highlights



I was sent 5 different flavours to review. They were: Fruit Slushie, Kiwi Passion Fruit Guava, Aloe Grape, Watermelon Lychee and Blue Razz Ice. The 2 that I opened and tried for this review were the Grape Aloe and the Fruit Slushie. I held onto one more flavour for emergencies, but gave 2 away to people who needed them. Of the 2 flavours I tried, the Fruit Slushie was my favourite.





The first that I opened was the Grape Aloe. The disposable was in a baggy inside the box to keep it fresh and as flavourful as possible. The only other thing included was a sheet of paper with warnings.
The flavour is amazing! Right off the bat you're met with the Grape and on the exhale you get the Aloe. There's also a cooling effect as well. It's VERY smooth and flavourful. The grape is a candied grape. The rush from the koolada was very refreshing.


Because it's a 5000 puff disposable, you WILL need to charge it. It has a USB-C port on the bottom of the device but seeing as it's a disposable, it doesn't come with the charge cable. Most people have one laying around though so it shouldn't be much of an issue.






The second flavour I tried was the Fruit Slushie. It was absolutely delicious. I LOVE berry flavours as well as non tropical fruit, so this was right up my alley! It also has a koolada effect on the exhale, but seems less than the first. The first flavours I taste are a mix of berries, specifically blueberries and strawberries. It reminded me of a smoothy and a slushy kind of thrown together.

The first device started to have its flavour drop at around the 7th day and then got a mild burnt taste around the 9th day. Got a good 2 days with a bit less flavour before the wicking inside started to burn from not being saturated enough anymore. The second one did even better, it went about 8 days before any drop in flavour and got to 10 days before burning out.

These are some very cool disposables. When I opened the packaging for the Fruit Slushie flavour, my girlfriend commented that she really liked the colours on it and that the shape was cute. I agree!

In conclusion, I would recommend these to people who are either just considering quitting smoking or are in need of a vape because they forgot theirs or ran out of liquid. I especially recommend these to the person just wanting to start out in vaping. They will absolutely love the flavours and will find the device easy to hold and use.

Please visit the link below to check out these disposables youself.(


I would like to thank Fiona from Zovoo for sending me these disposables to review. I have some more that I have to review soon as well, so keep an eye out for more! I also have some other vape stuff to review as well, so definitely keep tuned for more!

Thank you all so much for reading my review. As always, it was fun and an immense pleasure to review these. I hope you all got to learn a bit about these disposables, or at least got to see some cool pictures! I hope you all have a wonderful day!

Cheers!

Eleaf Pod Mod Compete!
[IORE Series VS iJust Series VS iSOLO Series]
Which one is your favourite Eleaf Series？
Do you know other Eleaf Series?
BTW, iStick Power Mono BIG GIVEAWAY is still going on, just click HERE to win it!

I know you won’t believe this but yes I’m back with another review for you. This time I will be attempting to do my best to provide a fair and honest review on the Voopoo Argus P1 Pod Kit that was sent to me by Voopoo. The Argus P1 is another pod device in a long line of pod kits from Voopoo. This time Voopoo has decided to use the somewhat popular square body design that we’ve seen used by other companies. The P1 has an internal 800mah battery with an output range of 5-20 watts depending on the resistance of the coil inside the pod used. One of the main features of the P1 is the PD fast charging. It can charge from 0-100% in about 18 minute and uses the Gene. AI 1.2 chipset. How nice is that? It also has adjustable airflow which is a plus in my book and uses the ITO Atomization Technology that we have seen from Voopoo before. The pods are compatible with the Argus Pod.




WHAT’S IN THE BOX?

I wasn’t aware that there were two different versions until the P1 was actually released onto the Voopoo website. The kit I received was the standard set with the pods that you cannot change the coil on.





1 x Argus P1 Device

1 x Argus Pod (Empty Cartridge)

1 x ITO-M1 coil (0.7ohm)

1 x ITO-M3 coils (1.2ohm)

1 x Type-C USB Cable

1 x Lanyard

1 x User Manual

SPECIFICATIONS:

• Material: Zinc Alloy + PC
• Output Power: 5-20 watts
• Output Voltage: 3.2-4.2V
• Resistance range: .5-3.5 ohms
• Battery Capacity: 800mah Built in Battery
• Size: 74.6*46.7*17.4mm
• Recommended E-Liquid: Nicotine<50mg

FEATURES:

1. PD Fast Charging (18mins) ： The PD fast charging speeds up to 18 minutes from 0 to 100%.

2. Futuristic Mechanical Style: Designed in a futuristic mechanical style, the half metal and half transparent device demonstrates sturdy and sophisticated beauty. To create its natural delicate grip feeling, the body is designed in gentle angles. ARGUS P1’s 4 LED beams light on and off with soft and clear light.

3. AI Output Adjustment：GENE. AI 1.2 Chip adjusts the matching powers by sensing each puff automatically. Meanwhile, the LED lights show real-time output power and battery life.

4. ITO Atomization Technology Equipped with VOOPOO's ingenious ITO atomization technology, ARGUS P1 brings you a delightful MTL experience.

5. Patented Leakage-Proof Design：Air-Tight Silicone Ring, Air-Tight Silicone Seal and 4-Hole Leakage-Proof Structure

6. The cartridge is compatible with ARGUS POD

INITIAL THOUGHTS:

The packaging for the Argus P1 is a little different than the normal two part box with an outer sleeve covering it. The packaging on this one has a pull tab that allows you to slide the inner box portion out of the box from the side. On the front is a nice color picture of the P1 with a very large warning below it. I’ve seen this type of large warning on another product before and am wondering if it has something to do with the regulations here in the U.S.. The back of the box has a list of the contents, two more warnings, a scratch off authenticity code, a bar code with the name of the color of device contained inside, and company information for Shenzhen Woody Vapes Technology(Voopoo).

One side of the box has some QR codes that you can scan with your phone to find out more about the product while the other side has a list of some of the features of the Argus P1.

Once you pull the cardboard tab and slide the tray out of the box then there is a box on top that contains the accessories and has the Voopoo name printed on it. Underneath sits the very nice looking Argus P1 with a pod already installed. I received the gunmetal version for my review. Inside the accessory box there is a second pod, a USB-C charging cable, a lanyard, and the user manual. It’s refreshing to get a pod kit with a second pod/coil for a change. Many I’ve reviewed recently only contained one coil or pod.

What I’m going to call the front of the P1 has the Argus name stamped into the body with the lettering in gold and gold screws. It gives a really nice aesthetic in my opinion. In the picture on the left you can see a gold colored loop sticking up which is where you would attach the included lanyard if you choose to use it. There is a clear section on one end where you can see the Gene name and some of the electronics. When I received it there was a clear film over it to protect it during shipping. The main body of the P1 is made of zinc alloy while the clear section is made of PC.

The back side has the Voopoo name in gold and you can see where the lanyard ring goes into the body through the clear section. You can also view more of the electronics through the clear portion.

One side of the P1 has a sliding airflow control that will allow you to go from very tight MTL to RDL. Below that is the USB-C fast charging port that will allow you to charge the 800mah battery from 0-100% in about 18 minutes. That’s two pluses in my book. Fast charging and adjustable airflow control. To me, adjustable airflow has become an important feature on a pod device. Some I’ve tried are a good fit for airflow but some are not so I think it’s always better to have an airflow adjustment built in like Voopoo has done here.

It’s a little hard to see but the P1 has four indicator lights in the front clear section seen in the second picture below. I took a second picture while it was charging so you could see the bright indicator lights that show the power and battery level as well as the Gene name that can be seen below. The P1 is auto draw only with no buttons at all so it would be very difficult to get a shot of the lights while taking a puff. The battery level can be seen by removing and replacing the pod. The light indicators for the battery level are as follows.

• One light = 1-25%
• Two lights = 25-50%
• Three lights = 51-75%
• Four lights = 76-100%

When charging the lights will flash in succession as the battery level increases and eventually all four lights will stay lit when it is fully charged. When in use there are a few other indications. The higher the output then the more lights will light. When the battery level is less than 25% the light will turn red. The safety indications are as follows.

• Low battery: Indicator light flashes red 10 times
• Short circuit: Indicator light flashes red 2 times
• Time out: Indicator light flashes red 8 times
• Temp High: Indicator light flashes red 15 times

The pod opening has two magnets that hold the pod in securely. There are also the usual two gold plated spring loaded contacts and a raised airflow intake opening. The pre-installed pod comes with a clear film over it to keep from accidental firing before it is filled with liquid.

It's now asking for my credit card info which I don't want to give, even though I'm curious to see the next screen and find out the fees they tacked on. I knew $9.99 for a 100 ml was too good to be true. Does anyone know of a cheap online seller that doesn't add any fees other than shipping??

[End] Happy Halloween! Get Your Halloween Treats Early! 15% Off Sitewide Sale


Happy Halloween! Our treat to you! All the witches are talking about this Sale. We launched a 15% discount with the code TREAT15. Don’t miss it!


Halloween Sitewide Sale

Offer: Sitewide 15% Off

Valid Date: Oct 29th - Nov 2nd, 2022 (UTC-6)

Coupon Code: TREAT15


3% extra amount by purchasing gift certificate:

By purchasing our gift certificate, you can get a 3% extra amount instantly and a total of 18% off for this sale. The gift certificates can apply for everything, especially for E-cigarette products.

Detail about gift certificate and user guide→

Hi, today let's take a look at the VooPoo Argus P1. In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPoo Argus P1; Before starting let's see together some special features indicated by the manufacturer:
• 1.PD Quick Charge (18 minutes)
• 2. Futuristic mechanical style
• 3. Chipset Gene AI 1.2
• 4. ITO atomization technology
• 5. Patented leak proof design
• 6. The cartridge is compatible with ARGUS POD



► VooPoo Argus P1; Packaging:
The classic package by VooPoo with black background shows on the front; the brand (VooPoo), the name of the device (Argus P1) and the image of the kit in relief surrounded by lines detectable to the touch that resemble an electronic circuit. On the back are present; The contents, warnings, scratch & check, color of this sample (Gun Metal) and various contact information for Shenzhen Woody Vapes Technology Co., Ltd. On the remaining sides of the box are; the main features in the form of icons and various Q-R Codes.





► VooPoo Argus P1; Packing List:
• 1 * Argus Pod P1 Device
• 1 * 0.7Ω Argus Cartridge (2ml)
• 1 * 1.2Ω Argus Cartridge (2ml)
• 1 * Type-C cable for charging
• 1 * Lanyard
• 1 * User Manual



► VooPoo Argus P1; Specifications:
• Size: 74.6 * 46.7 * 17.4mm
• Weight: 70g
• Name: ARGUS P1
• Material: zinc alloy + PC
• Output power: 5-20W
• Output voltage: 3.2-4.2V
• Resistance range: 0.5-3.0Ω
• Battery capacity: Integrated 800mAh
• Recommended e-liquid: Nicotine≤50mg



► VooPoo Argus P1; Available colours:
• Black
• Gunmetal
• Red
• Green
• Silver



► VooPoo Argus P1; First Impressions:
Among the countless Pod devices that continue to saturate the market relentlessly, it is vital for manufacturers to stay on top of implementing the performance and functions of their devices. From a technical point of view, VooPoo is second to none and has always meticulously cared for the aesthetic / artistic part of its products, inspiring competitors also on the path of design to follow.



When I first saw Argus P1 I was reminded of Drag 2 Nano a vaporizer that has made school in this type of entry level with "pocket" design. But with Argus P1 an absolutely excellent aesthetic and finishing level has been reached, judge the image below that depicts Argus p1 and Drag Nano 2.



VooPoo Argus P1 is a small object designed in a futuristic mechanical style, the half metal and half transparent device combines robustness and sophisticated elegance. its body is modeled with gentle and well-connected curves that give a natural sensation to the touch and a delicate grip.



All the elements that make up Argus P1 blend together in harmony; the transparent part reveals the refined internal circuit. The body of the transparent Mod matches the equally transparent and crystalline cartridge. The other 50% of the P1 body in Gun Metal color is made up of solid and smooth metal, enriched with details in sparkling gold color, which are; the French screws, the words "ARGUS", "VOOPOO" and the handle to fasten the cord.



► VooPoo Argus P1; AFC control:
The slider button for adjusting the air flow has a short excursion, but fully sufficient to give the Argus P1 a perfectly adjustable MTL shot in an arc that goes from completely closed up to trespassing into the RDL with the 0.7Ω coil . In addition, the key with its metal solidity is well braked during adjustment and perfectly maintains the set position.



► VooPoo Argus P1; PD Fast Charge:
The ARGUS P1's 4-level LED with its soft, clear light monitors performance and keeps you informed of what's going on. The fast charging speed takes advantage of the PD protocol and is able to complete the operation in just 18 minutes from 0 to 100%. According to the laboratory data detected by vooPoo, the 1.2Ω coil after a charge of only 5 minutes is able to support 2 hours of vaping.





► VooPoo Argus P1; Led & Notifications:
The GENE AI 1.2 chip interfaces with an advanced LED system that shows the output power in real time through luminous bars, to view the battery charge level you can remove the cartridge at any time, and up to 4 luminous bars, will be shown horizontal as follows:
• 1 White Led on; the battery charge level is between 1 and 25%
• 2 White LEDs on; the battery charge level is between 25 and 50%
• 3 white LEDs on; the battery charge level is between 51 and 75%
• 4 white LEDs on; the battery charge level is between 76 and 100%.

During recharging, the white indicator lights flash and the scale from 1 to 4 LEDs is completed progressively. At the end of the recharge, the 4 white LEDs remain bright and steady. The Bypass circuit simulates the "mech" behavior therefore during use the number of white LEDs on also quantifies the power delivered, when the percentage of battery charge is less than 25% the LED will turn red.

Furthermore, the LED has the task of sending notifications on the operation of the device and on the active safety protections as follows:
• 2 Red Led Flashes; a short circuit was detected
• 8 Red Led Flashes; the continuous activation limit has been reached (8s)
• 10 Red Led Flashes; the battery is low and needs to be recharged
• 15 Red Led Flashes; the card temperature is too high.



► VooPoo Argus P1; Above/ Under:
The bottom base of Argus P1 is wide enough to offer a stable position of the mod vertically, even during the charging phase.
The upper base houses the handle for connecting the lanyard on the transparent part. The Compartment / Pod contains the contact pins and the sensor for the automatic activation of the puffs. The two magnets are mirrored to those on the bottom of the cartridge and are quite strong.



► VooPoo Argus P1; Disposable Pod:
The cartridge made of transparent PCTG has an ergonomic lip spout and allows you to perfectly view the liquid inside. The filling is done by lifting a side silicone rubber, the hole of good size allows you to easily insert up to 2ml of e-liquid. On the bottom of the cartridge there are 4 holes for the passage of air to the coil, according to VooPoo this system expands the air flow that affects the coil globally, increasing the flavor, furthermore the 4 holes are an integral part of the antileaking system present at the inside the cartridge itself. On the bottom of the cartridge we can see that the magnets are not visible, in fact they are there and they work quite well. The Argus P1 cartridge is compatible with ARGUS POD and the leak proof system is made up of high quality silicone gaskets that guarantee airtight seal against air infiltrations and proven reliability against leaks.



► VooPoo Argus P1; Vaping test & final conclusions:
The new Argus P1 is definitely a comfortable, well-built and eye-catching Pod device. The new GENE.AI 1.2 Chip has reached perfection as regards the management of the "automatic puff" which has always been the Achilles' heel of these devices! In fact, a slight extraction is enough to activate the Puff instantly and with any degree of opening of the airflow. The AI 1.2 chip GENE automatically adjusts each puff and increases or decreases the output according to the pressure exerted on each puff to save energy and maximize battery life. In addition, the 4-level led provides simple full control for the 800mAh battery. In the package there are two ITO disposable Pods, one of 1.2 and one of 0.7Ω both are dedicated to MTL vaping, my favorite is the 0.7Ω one because it provides greater Hit and heat, but I think both are able to really please everyone because they provide exemplary and spitting-free operation, in fact after a very intense use of these cartridges I have not detected any trace of condensation in the compartment / pod. I honestly think this is really all that could be expected from Argus P1 because in the entry-level category this kit is absolutely capable of dominating the scene.

I would like to thank VooPoo for providing me with this kit. I hope this review was useful for anyone looking to buy Argus P1.

Thanks for reading.

Bp Mods Lightsaber Kit is a pod mod kit with a brand-new concept, using two different versions, which are different in height. Of course, there are some differences in performance.


We call them Model.L and Model.S. Let's start with the model s pod mod kit, which is a device powered by a 1500mAh built-in battery with a maximum power of 40W. Then there is model l. Although this device is large in size, its performance is also superior. Compatible with a built-in 2100mAh for you to eat and a maximum output of 60W. In fact, from the difference in output, we can know that they will feel very different when they vape. Depends on user preference.

In terms of texture, the device adopts PCTG, stainless steel design, so the whole will be more wear-resistant and fall-resistant. Therefore, the durability will definitely give you peace of mind. On the front of the kit, you should be able to pay attention to a large and small screen for viewing data.

The two +/1 adjustment keys at the bottom can help you adjust the power or voltage. Through the fire button, you can not only quickly start the lightsaber kit but also switch the power/voltage/bypass mode to achieve real vaping customization.

The pod cigarette holder is paired with Model. S is relatively slender, so it will be relatively soft and delicate when vaping, while Model.L is a relatively short and round cigarette holder, so the number of clouds will be larger and the taste will be stronger. . The airflow adjustment system at the bottom also perfectly controls the airflow.

I'd like to suggest:
uwell sculptor vape
caliburn a2s

Hell200 Kit is ultra light, compact and portable. It is powered by dual external 18650 batteries with 200W max output and Type-C charging. is compatible with W8-01/02 coils, features 5ml/6.5ml capacity, top filling system and top leading coil system for leak-proof use and fast coil replacement. It has 7 output modes (Power, TC-NI, TC-TI, TC-SS, TC-TCR, VPC, Bypass) for your option and is designed with a 0.96-inch colorful screen to show you the vaping data.



Battery: Dual 18650 batteries (Not included)
Power Range: 5-200W
Output Voltage: 0.5-12V
Charging Voltage: Type-C 5V/1.5A
Output Mode: VW/Bypass/VPC/TC
Screen: 0.96 inch colorful screen
E-juice Capacity: 5ml/6.5ml capacity
...

Click here for more:

Hellvape Hell200 Kit: Hellvape Hell200 Box Mod Kit

It is often said that the sparrow may be small but it has all the vital organs to describe the vape kit that I want to talk to you about today. Come and let me show you the high-quality vape kit that will be released soon.


VOOPOO Argus P1 Pod Kit has a tech-like metal design, a transparent shell, and an industrial style, stylish and cool. The overall look is small and light, it can be easily put into a pocket without taking up too much space, and there is a metal loop on the top, specially designed for lanyards, you can hang the device around your neck to prevent it from being missed.

The whole machine is equipped with a built-in battery of 800mAh, and the maximum output power can reach 80w. The type-c charging interface on the side can fully charge the device in a short time to provide an uninterrupted experience.

VOOPOO ARGUS Pod cartridge matches the Argus P1 Pod Kit, which can hold 2ml of e-cigarette liquid, and the top leak-proof design provides users with a clean and tidy environment. The pod is compatible with 0.7ohm and 1.2ohm coils, you can experience MTL and RDL vaping at the same time.

Many people don't know where to buy high quality vape, then I suggest you to visit vape online uk.

I want to recommend to you：
elf bar 600 kit uk
uwell caliburn x kit

The Argus P1 of vapesourcing is yet another device in the Argus line of pod systems. Made from zinc alloy and PC materials, this compact device features rounded edges, a huge laser-printed Argus logo, and semi-visible chipboard for a futuristic appearance. Purchase the kit in red, black, silver, gunmetal, or green.

On the technical side, this new kit from Uwell features a fast-charging 800mAh internal battery that permits operation in the range of 5 to 20 watts. Moreover, the GENE chipset features AI auto adjustments so the coils will be optimally fired, as well as ITO atomization technology to ensure vape juice is efficiently vaporized.An easily-refilled 2mL pod is found at the top of the Voopoo Argus P1 Pod System with two coil options. The first is the pod with a 0.7ohm integrated coil for freebase e-liquids or nic salts or choose the included 1.2ohm version, ideal only for nic salt e-liquids. Each cartridge also has a patented leakproof design and the ability to make adjustments to the airflow for an adaptable vape experience.

voopoo argus p1 Features:
Suitable for MTL or Sub Ohm vaping
Internal rechargeable battery
Manufactured by VooPoo
From the Argus Series
Optimised for performance
2ml Capacity Pods



Recommended products:
caliburn uwell Ohio
uwell sculptor pod Florida

An exciting event in JAKARTA INTERNATIONAL EXPO, looking forward to seeing you all

Joyetech EVIO Pod Kit

EVIO Pod Kit has 960mAh built-in battery, and 17W max power. Featuring the innovative airflow-output sync control function, it supports MTL or RDL vaping, you can switch between H and L levels by rotating the pod 180°. L level releases small airflow with low output for MTL vaping, and the H level brings large airflow with high output for RDL vaping. The pod is equipped with a 0.8ohm mesh coil and 3ml/2ml e-juice capacity, which will provide great flavor. Joyetech EVIO Pod Kit takes 60min to be fully charged with type-c fast charging tech.

Details:
1. From MTL to RDL
2. Innovative airflow-output sync control
3. Mesh coil for great flavor
4. Slide to fill
5. 3ml 0.8ohm pod
6. Type-C fast charging
7. 960mAh battery capacity




Vaporesso Luxe XR Kit

Luxe XR Kit is built with a 1500mAh battery with 40W output and Type-C charging. Supported by the COREX heating technology and AXON Chip, it can ensures faster heating, boosted flavor and bigger clouds. It also features the auto lock function after 8S pressing and secured mode to avoid accidentally misfiring. In addition, Luxe XR has a crystal clear body with 3 layers of coating to become durable enough to resist daily abrasion and daily dropping. Luxe XR Kit is equipped with the GTX 0.4Ω/0.8Ω Mesh Coil & Luxe XR MTL/RDL Pod in the package. It also has a large 5ml capacity and bottom filling system. The SSS leak-resistant tech can lock the liquid inside and maximally reduce the leakage.

Details:
1. Built-in 1500mAh battery with 40W output
2. COREX heating tech for accurate flavor
3. Adopts AXON Chip with smart control
4. Abrasion/stain resistant coating and PCTG tube
5. Auto lock the device after 8S pressing
6. Secured mode to avoid accidental misfiring
7. Designed with 3 LED lights to display
8. Futuristic design, crystal and solid body
9. Adopts SSS leak-resistant technology
10. 5ml e-juice capacity, easy bottom filling
11. Fit for Luxe X 0.4Ω/0.8Ω Pod, Luxe XR RDL/MTL Pod, GTX 0.4Ω/0.6Ω Coil (RDL), GTX 0.8Ω/1.2Ω Coil (MTL)

#CROSSWITHXROS

Attention! It's coming soon! Cross the limits again with the brand new VAPORESSO XROS 3! Please stay tuned till its official launching on Oct 28th!

NOW is time to join the #crosswithxros event! And special surprises are ready for you! From Oct 17th to 28th, you can just simply join our event by following ways:



Take a photo anywhere you can see XROS

- For FB users –

Share on your personal FACEBOOK account and tag @vaporessoecig with hashtag #crosswithxros

Tag your friends (must be over 21) and invite them to like us on @vaporessoecig

- For IG users –

Share on your personal INSTAGRAM account and tag @vaporesso_global with hashtag #crosswithxros
Tag your friends (must be over 21) and invite them to follow us on @vaporesso_global



And you can join on our official website https://www.vaporesso.com/activity/cross-with-xros to double your chance.



The first 20 (10 for social media and 10 for official website) will be announced on Oct 21st.



WARNING: This event is only for users in countries (regions) permitted by relevant laws and regulations.

WARNING: Participants must be of legal age as determined by local laws.

Hi, today let's take a look at Freemax Galex & Galex Nano Pod. In this Test I will examine each of the characteristics that distinguish these items. I hope that by the end of this reading you have understood these products, and therefore decide whether to invest in them or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.



► Freemax Galex & Galex Nano; Before starting let's see together some Features indicated by the manufacturer:
• Full Spectrum Vaping: Shines like the galaxy
• FM SaltCoilTech 4.0, ultra mouth-lung solution
• FM Leak Resistant Technology - Creative labyrinth chimney design
• Freemax Galex Top Fill Pod - Compatible with Freemax GX Mesh Coils
• 3-level adjustable output: customize as you wish (Galex nano)
• 800mAh Rechargeable Battery - Big enough for all day vaping



► Freemax Galex & Galex Nano; Packaging:
The packages are naturally different from each other in shape and size, however, both report on the front; the image the color and the name of the device. On the back of both packs you can read; specifications, content, warnings. Also you will find; scratch & check, barcodes, trademarks and legal logos. On the remaining sides of the boxes there are; the icons of the social networks that FreeMax uses for the promotion of its products and the reference addresses of the manufacturer.





► Freemax Galex; Packing List:
• 1 * Galex Kit
• 1 * 0.8Ω GX Mesh Coil
• 1 * 1.0Ω GX Mesh Coil
• 1 * Warning Card
• 1 * Warranty Card
• 1 * User Manual
• 1 * USB Type-C cable

► Freemax Galex Nano; Packing List:
• 1 * Galex Nano Kit
• 1 * 0.8Ω GX Mesh Coil
• 1 * 1.0Ω GX Mesh Coil
• 1 * Warning Card
• 1 * Warranty Card
• 1 * User Manual
• 1 * USB Type-C Cable



► Freemax Galex; Specifications:
• Size: 23.5 * 16.5 * 107.47mm
• Capacity: 2ml
• Coil resistance: 0.8 / 1.0Ω
• Battery capacity: 800mAh
• Output power: 11-16W
• Output voltage: 3.3-3.5V



► Freemax Galex Nano; Specifications:
• Size: 53 * 19 * 76.96mm
• Pod capacity: 2ml
• Coil resistance: 0.8 / 1.0Ω
• Battery capacity: 800mAh
• Output power: 11-22W
• Output voltage: 3.3V-3.5V-4.2V



► Freemax Galex; Available colours:
• Gunmetal
• Blue
• Cyan Purple
• Pink Gold
• Black



► Freemax Galex Nano; Available colours:
• Blue
• Black
• Gunmetal
• Red Gold
• Pink Purple



► Freemax Galex & Galex Nano; First Impressions:
The two devices in addition to sharing the same name (Galex) have many characteristics in common, which is why I decided to enclose them together in a single review. Of course, the form factor changes; Galex is a classic "stick" while Galex Nano resembles a small stylish case with a lanyard attachment. Both have the same built-in 800mAh battery, with Type-C charging port, for a charging time of about 40 minutes. Furthermore, the cartridges as well as the coils are interchangeable. The technical diversion factor between the two Galex is represented by the fact that Galex stick has an output range between 11 and 16 watts according to the battery charge level, while Galex Nano develops a power between 11 and 22 watts which are adjustable on 3 different power levels. So completely different form factor, a small technical difference, but the same objectives which are to give the user excellent MTL performance, maximum compactness, and great portability.



► Freemax Galex; Design & Led:
The classic "Stick" design of Galex shows on the main side a huge dark-colored LED display with the writing "Galex" in white in the center, and a small LED for notifications. On the back the only decoration is represented by a small writing "Freemax". On the sides of the Galex there are two small MTL holes for the passage of air, one hole on each side. As previously mentioned the Galex Pod has a single battery light with three different colors that light up depending on the battery level as follows:

• Green Led: Battery charge level between 70 and 100%
• Blue Led: Battery charge level between 35 and 70%
• Red Led: Battery charge level between 0 and 35%



The spectacular part is played by the large LED display, and it does so with a lighting worthy of a Christmas tree, in fact you can choose between:
• Lighting off.
• Unicolor display
• Multicolor display
You can vary these three options by simply arming / disarming the pod twice within 3 seconds.



► Freemax Galex Nano; Design & Led:
The "artistic" form factor of the Galex Nano is quite remarkable, and is also accompanied by an excellent sturdy feel due to a significantly heavier weight than galex stick. One of the two panels of Galex Nano implements a large transparent window with an octagonal design, through this window it is possible to see the internal chipset illuminated by a cascade of phantasmagoric colors. The opposite panel has a more humble aspect, in fact it does not have any decoration. The profile of Galex Nano is ultra-flat and on what I will call "the main narrow side" there is a small hole for the passage of air and a multifunction button that allows you to activate the mod also manually. By clicking the button once; you can check the battery level as follows:
• Green Led: Battery charge level between 70 and 100%
• Blue Led: Battery charge level between 35 and 70%
• Red Led: Battery charge level between 0 and 35%



Also in this case the luminous "galaxy" is reproduced by the Display, this time in combination with the use of the key you can change the lighting options. Also with the button you can change the power level, or turn the Galex Nano on / off.
• Press the button twice to change the Led mode from unicolor to multicolor or off
• Press the button three times to adjust the output levels (shown in the second image below)
Press the button five times to turn the device on / off.





► Freemax Galex & Galex Nano; Above under:
On the bottom of Galex and Galex Nano you find the USB-C charging socket and the same information regarding the internal 800mAh battery which is identical for both Mods. So you can fully recharge Galex and Galex Nano in about 40 minutes.

Obviously Galex and Galex Nano share the same compartment / pod design because they use the same and identical cartridges. Inside the compartment / pod there are; two contacts, two magnets and two raised air vents. On the upper base of Galex Nano you will find the name printed in white and two openings to thread a cord if you want to hang the device around your neck.



Galex cartridges are transparent for optimal internal visual control. The cartridges contain up to 2ml of e-liquid which is refillable from the top after removing the spout. The removable spout also provides protection for children, and the cartridges are equipped with FM Leak Resistant technology with "Maze Chimney design" to prevent leaks. In the second image below you can see the filling operation which can be conveniently performed without taking out the cartridges from the mods, the red gasket above the filling port prevents leaks during filling. The lower part of the cartridges has two magnets which are mirrored to those of the Mod. The coils are inserted from the bottom with a slight pressure after having aligned the flat parts in the recess of the respective cartridges.





► Freemax Galex & Galex Nano; GX Mesh Coils:
Galex and Galex Nano include the same Mesh Coils in their respective kits; one is the GX 0.8Ω for RDL which is rated for 13-18W and the other is the GX 1.0Ω for MTL with 12-16W range, Freemax plans to release new GX coils options in the future.



► Freemax Galex & Galex Nano; Vaping test & final conclusions:

• 0.8Ω GX Mesh Coil:
I liked this coils installed on Galex Nano a lot because with the highest power level (Green 4.2V) it has good RDL performance, the puff is not too loose, the flavor is concentrated and the hit in the throat is satisfying. The same coil installed on the Galex Stick has a slightly different behavior and seems more in tune with the MTL vaping mode, this is due to the fact that Galex has a constant power delivery at a "softer" level than the Galex nano. In addition, the airflow of Galex is more restricted than that of Galex Nano.

• 1.0Ω GX Mesh Coil:
This option looks perfect for the Galex and its restricted MTL airflow, however I also quite like it with the Galex Nano with the medium power level selected (Blue 3.5V). It seems that the FM SaltCoilTech 4.0 technology of these GX Coils also works quite well with my VG / PG 50:50 e-liquids, the flavor is pure, there are no spitbacks and condensation is zero. Freemax claims that with the GX coils you will be able to fill the cartridge at least 10 times before the flavor starts to degrade, I believe this statement is honest and that it is definitely an achievable result.

You may not be interested in the fantastic "Full Spectrum" lights that Galex and Galex Nano are able to offer you, but fear not these lights can be safely disabled on both Mods. If you are looking for Pod devices that have features that stand out in this immense ocean of Pods that the Chinese industry offers us, I can tell you that Galex is an excellent option for MTL, with a classic design and the only automatic activation of the puff. Galex nano is more refined and captivating in appearance and has the double activation of the puff with 3 selectable power steps that allow you the same MTL performance but more power in RDL mode. So calmly choose the Galex Pod Mod you prefer, I believe you will be satisfied.

I would like to thank Freemaxtech for providing me with these kits. I hope this review was useful for anyone looking to purchase the Galex & Galex Nano Pod.

Thanks for reading.

Packaging: 10ml aroma
Manufacturer: DecadentVapour - England
Recommended mixing ratio: 10-20%
Strawberry, lime and blackcurrant, which according to the manufacturer is what this aroma is about. I'm a little wary of these mixed fruit soups, because if there are too many ingredients, the flavors don't really come through. Since there are only three fruits, I trust that they do not mix so much that the taste is indistinguishable. The aroma has a delicate strawberry smell, in which you cannot smell anything else. The taste, on the other hand, is a little more complex, as the fruits lost in the aroma also appear. First you can feel the strawberry, which will dominate the soup throughout. The second noticeable flavor is blackcurrant, although it is not as strong as strawberry, but it is easily discernible. At the end, you can also feel a little citrus flavor, which could be orange and lime, but it's not entirely clear to me. The flavors change to a kind of mixed fruit soup during steaming. A slightly sweet, strawberry-rich mixed fruit bomb. Maybe I could compare it to a candy flavor, which is not filling, but rather a hard lollipop. Two of the three main flavors are perfectly discernible, but the lime is not clearly a lime, but rather manifests itself with the citrus effect of oranges and lemons. It is suitable for all-day use, as we get a light mixed fruit soup that does not stain the roll at all. You don't have to think about it much, you get exactly what is promised in the description