Random DIY mixing and More

Hi, hitt, I did rewick last night and brushed each side 4 or 5 times and dropped the tails in the wells. They go all the way down but it seems to be wicking fine - not dry.
Sides seem okay this time.

Flavor does seem different from the ZX a little but could be due to tank design or coil. The same juice almost always tastes a little different to me using different attys.

There is still just a touch of weeping at the bottom airflow slots after refilling, not with the first fill though.
Maybe I will go over the gaskets again next cleaning.

Thank you again for taking the time to look into it!
I’ve only refilled once so far. I have the bottom and top airflows just slightly cracked open. I don’t like a super airy draw. No seeping yet. I do agree that most tanks have different tastes with the same liquid. I used to use rtas exclusively but fell in love with the itanks and coils so have been using those a lot. I do really like the dead rabbit mtl 2 tank a lot and have kept it in rotation since I reviewed it. I’ll let you know if I get any seeping. Like you mentioned, might be a good idea to replace the seals with the spares.

Random DIY mixing and More

I’ve gone through about half a tank so far and the flavor is improving a little. Might just need some time to break in the wick.
Hi, hitt, I did rewick last night and brushed each side 4 or 5 times and dropped the tails in the wells. They go all the way down but it seems to be wicking fine - not dry.
Sides seem okay this time.

Flavor does seem different from the ZX a little but could be due to tank design or coil. The same juice almost always tastes a little different to me using different attys.

There is still just a touch of weeping at the bottom airflow slots after refilling, not with the first fill though.
Maybe I will go over the gaskets again next cleaning.

Thank you again for taking the time to look into it!

For Sale Atom & Nightmare setup

For sale
Immortal Mods Atom
First run
Black derlin & brass with copper contacts
#89/100
21700
28mm

Brass Nightmare v1
28mm
Spare gold plated posts & hardware
Pouch

150 plus ✈️
Located in Virginia

Attachments

  • 20250616_160213.jpg
    20250616_160213.jpg
    1 MB · Views: 7
  • 20250606_085925.jpg
    20250606_085925.jpg
    952.9 KB · Views: 8
  • 20250606_085920.jpg
    20250606_085920.jpg
    841.1 KB · Views: 8
  • 20250529_183331.jpg
    20250529_183331.jpg
    734.6 KB · Views: 8
  • 20250506_222323.jpg
    20250506_222323.jpg
    814.2 KB · Views: 8
  • 20250424_012755.jpg
    20250424_012755.jpg
    706.6 KB · Views: 6
  • 20250424_012800.jpg
    20250424_012800.jpg
    723.5 KB · Views: 8
  • 20250424_012822.jpg
    20250424_012822.jpg
    883.1 KB · Views: 9
  • 20250424_012916.jpg
    20250424_012916.jpg
    1.1 MB · Views: 10
  • 20250424_012908.jpg
    20250424_012908.jpg
    940.4 KB · Views: 8

Filter