hittman said:

Sounds like that will be a super nice setup once finished. That couldn't have been cheap. When our house was first built and we moved in, I wanted to find someone to add on to the back side of our garage to make it tandem on one side but at the time construction was booming and no one wanted to pull people off to do a little job like that. I ended up having a shed built in that space instead.

Click to expand...

Oh yes, it’s hit over 100 grand but it will be nice. I believe the cellar addition is a very good part of that cost. They did all the concrete last fall and finished closing it off this spring. They still need to make the entrance into the original basement.

here here said:

What brand vape do you like ?

Click to expand...

What brand vape do YOU like ?

You could try a dual flavor or a cbd vape

smacuser said:

View attachment 994123

Click to expand...

YAY! JAZZ HANDS ARE BACK!!!!!

smacuser said:

Wow The years just fly by

Login to view embedded media

Click to expand...

Eight years, in the blink of an eye.

Coyote628 said:

OP's comments that vaping is wicked stupid says all I need to know. It's not rocket science and it's obvious that vaping may not be for him. The other fact that it was basically a hit and run, I suspect the OP's situation is not going to improve.

Click to expand...

I'm guessing he went back to his office desk.

Those are the PNP tanks, the coil inserts at the bottom and they have a bottom fill port. Recipe for disaster if ya ask me. Practically guaranteed to leak at some point. The 510 threaded base for these is kinda cup shaped and won't let juice get into the mod but you will be cleaning the base quite frequently. I personally will never buy a bottom fill tank for this reason

OP's comments that vaping is wicked stupid says all I need to know. It's not rocket science and it's obvious that vaping may not be for him. The other fact that it was basically a hit and run, I suspect the OP's situation is not going to improve.

Nice mod i like this one

Pigs said:

From memory, you're also a fan of the Battlestar squonker.

Click to expand...

Yes definitely. I think I bought the last ones on the internet, when a B&M store that also sold on the internet had about 4 left in clearance, all of them yellow. I bought all 4. I haven't been able to find them again, except on a site which I think is a scam.

hittman said:

Thanks! It is a little wide. I’m hoping to get their new 21700 mod for review. That might be a better fit for you.

Surely you could stand one or three with as inexpensive as they are.

Click to expand...

Let me finish saving up for the trip expenses, as I've only made the deposit. Then there are so many things to buy, like a carryon that fits their size criteria, which is totally different than the airline criteria, like disposable ecigs for the trip, like nicotine lozenges, etc. Then I have to have spending money while I'm there. Maybe once all that is taken care of, I can buy a couple of these mods.

@ShowMeTwice Anyway since i got 2 mechs now a third coming my way (my brother has an old vanilla mech for me) just needs cleaning its betined so now i need a kickass RDA haha any recommandations?
I only have 3 RDA and theyre not exactly top end its just Dead Rabbit V3, Geekvape Tengu,and Oumier Wasp VLS all 3 are hyrbid safe i checked but want another ofc cuz vape gear never ends lol
Was looking at armegeddon rda 25mm or recurve v2 or drop rda,maybe purge rda too not sure yet theirs a ton of options i was also mentioned a tauren rda which is in stock here too

Edit: that vanilla mod my bro has for me apperently has noo vent holes lol and was a cheapy that even safe?
Appears to not be hyrbid but thats fine

I got a ohm calculator i will always use for a new build i know you technically never get 4.2v out of a mech but ill calculate like that anyway for safety
And i will stay below max CDR that way it should never vent

@ShowMeTwice Ya i usually vape between 60-100 on regulated most of time its 60-70w so that should be a good build for me to then,they are dual fused claptons tho hopefully they arnt to big of a mass but ill try them and see anyway,
My batteries are in perfect shape not even a scratch on it on the contacts and wrap the hybrid i use also has a plastic tube that helps for shorts too right?
Man im loving mechs to bad they arnt as popular hopefully theyll come back one day but as of now they my fav devices, lets say a part breaks of my mech or i need new magnets i can just go to metal shop and ask to make me new part? Its that simple with mechs?
They should last till i die then..
All tho my mod is brass and copper i need to find some kind of metal polish will any metal polish be fine to clean it?
Heard ketchup works too and vinegar but id rather use proper stuff
I can see you guys are mech lovers too?
We are a rare breed now haha

FranC said:

I'm not sure what they still have to do upstairs but in the basement they need to make an entrance into the original basement. Still need to take the windows out between rooms. Also need to make the doorways between rooms. Insulation and sheetrock still needs to be done. The roofing is done. They also need to do the decks on each side/

Click to expand...

Sounds like that will be a super nice setup once finished. That couldn't have been cheap. When our house was first built and we moved in, I wanted to find someone to add on to the back side of our garage to make it tandem on one side but at the time construction was booming and no one wanted to pull people off to do a little job like that. I ended up having a shed built in that space instead.

Pigs said:

Thanks for another thorough review Hitt.
I rarely use dual battery mods these days but I like the look of this one.

Click to expand...

It's funny you mention that because as I was looking at the 15 or so that I have in rotation, none of them are dual battery. Several are 21700 though and feel like I get good enough life out of them that I don't need dual batteries that much.

I'm not sure what they still have to do upstairs but in the basement they need to make an entrance into the original basement. Still need to take the windows out between rooms. Also need to make the doorways between rooms. Insulation and sheetrock still needs to be done. The roofing is done. They also need to do the decks on each side/

ShowMeTwice said:

good morning

been very busy lately

i have zillions of alerts and PM's . . . will check those laterz today

this is a very quick fly-by post . . . off to a doctors appointment now

laterz then . . .

Click to expand...

Glad you stopped in. Is everything ok?

Bea-FL said:

I’m so sorry I’m here with bad news. Dan Lamberti, known to us as Uncle, passed away two weeks ago. He didn’t visit the Lounge a lot but most of us have received his wacky birthday wishes. He was mostly attached to the Snails. I had some vaping stuff for him and after I texted him and didn’t hear back I got worried. His sister Susan called me with the bad news. As some of you know he had end-stage kidney disease among other issues and Susan said although they don’t havethe autopsy results yet they think that was mostly the culprit. I’m going to miss him a lot.

His sister said I ould share his obit with everyone.

Daniel Lamberti Obituary (2023) - Fort Lauderdale, FL - Sun-Sentinel

View Daniel Craig Lamberti's obituary, send flowers and sign the guestbook.

www.legacy.com

Click to expand...

Hola ..

I liked him from the get go .. he invited me to his place more than once ..

We all get a finite number of days on this World .. Dan maximized his time .. that's the best any of us can do and a great example for anyone of any age .. RIP