Latest activity

FranC · Apr 15, 2023

Good night, dale.

Vapor Fiend · Apr 15, 2023

Long time vapist here. Been on custom rolled coils and DIY juice for at least 10 years now.

Not asking for a diagnosis but was just curious if anyone else has ever noticed a very quiet clicking, crackling or popping sound coming from their mouth (I assume actually coming from throat or lungs) upon exhaling or inhaling. I can hear it when I'm in a very quiet area. It's subtle, but this is what I would describe the sound is like:

Imagine you're inflating a plastic bag. The last few little creases in the plastic straightening out as the bag fully inflates; imagine the sound that would make. This is what I'm hearing sometimes upon inhaling or exhaling. Curious to see if anyone else has ever experienced this.

I use a vaporesso gen s
Vandyvape Pyro RDTA
.5ohm @ 42w (low clouds)
Roughly 12ml/day
3mg nic. 70/30 vg/pg
Vaping since 2007.

Frenkyou · Apr 15, 2023

Great review Hitt, I like this old school Mod :thumb:

FranC · Apr 15, 2023

DLKnives said:
We got to 72 today.

Beat ya…… 90.

DLKnives · Apr 15, 2023

We got to 72 today.

JoeyC · Apr 15, 2023

daleron said:
Good evening y’all, we just finished supper. BBQ ribs and salad.

Can’t say I’m terribly surprised after the yard work you did, sorry you’re in pain though

Nah not from that I didn't use that arm to pick anything up. I had it in a arm sling so I wouldn't use it. Still have swelling, I'm pretty sure it is the nerve that is the problem. Just resting today trying to stay on top of the pain with tylenol. I refuse to take the drugs they gave me I don't like opiods.

The60WattGUY · Apr 15, 2023

ShowMeTwice said:
Yihi chipsets are very much overrated!!!

Dicodes and DNA rule the roost with TC vaping. LOL

Id love a dicodes or dna mod one day and prob will hunt one down i just dont use TC but even then they still very accurate boards i hear

FranC · Apr 15, 2023

hittman said:
Good evening. The wife is finally going to do our taxes. I’m a little scared. This is the first year in many that we haven’t had college expenses to deduct. I hope we don’t owe much.

College expenses are quite pricy. You could come out paying less overall.

hittman · Apr 15, 2023

Good evening. The wife is finally going to do our taxes. I’m a little scared. This is the first year in many that we haven’t had college expenses to deduct. I hope we don’t owe much.

The60WattGUY · Apr 15, 2023

@ShowMeTwice Wow an old eleaf performing better than yihi show that yihi is overrated lol

hittman · Apr 15, 2023

firechick said:
Evening, boys. Has anyone been able to use the forum on Tapatalk lately? I gave up on it months ago, but wouldn't mind checking the forum every now and then on break.

As far as I know it doesn’t work and they don’t plan on making it work.

The60WattGUY · Apr 15, 2023

And that dotmod silver one is crazy beautiful can i see your entire collection lol

The60WattGUY · Apr 15, 2023

ShowMeTwice said:
Thanks!!! I've had it for a long time. Still use it regularly.

I have many mech mods. Tubes and squonkers. But I also enjoy vaping on my regulated mods. At any given time I have 7-10 setups in rotation.

If you like your hybrid mech, and if you don't mind my suggesting one???, try to find a dotMod Petri Lite 24mm hybrid mech. 24mm because you prefer larger RDA's. I have a couple of the 22mm Petri Lite's. They hit nice and hard. Very well built. Not weighty. Very nice fire button. Well designed.

I was able to find mine on-sale. I don't know, perhaps if you look around the EU you might be able to find some and maybe on-sale.

My purple Petri.

View attachment 994138

And my rose colored Petri.

View attachment 994137

dotMod makes excellent quality mods and RBA's. I also own a couple of their mech squonkers.

Well i got a Noob question already lol since the app i downloaded confuses me anyway i use dual coils right in my rabbit the app i downloaded asked how many coils i say 2 but a .24 calculated to 120watts thats wrong right? It should be 60 i thought even tho its 2 coils its evenely spread and not doubled right? Either way still under my amp limit

DavidOH · Apr 15, 2023

Bronze said:
That stuff makes your head spin.

Yes it does.

hittman · Apr 15, 2023

ShowMeTwice said:
LOLz.

If I ever buy a mech boro I will only need one RBA to satisfy my needs. The Atmizoo offering meets my needs. I won't purchase a device that has options for panels or buttons. I've no interest in any of that. I would be happy with one boro mech mod. Don't have any interest whatsoever in collecting them.

Naturally . . . that's if I ever decide to buy one. Thus far my ability to say no to boro gear has been very strong.

However, I thoroughly enjoy reading about everyone's boro experiences. And I will gladly help others spend their money on boro stuff.

My journey started with a couple of the Aspire Boxx and cascaded from there.

FranC · Apr 15, 2023

Good evening, dale.

We went out for ice cream cones. Just got back.

FranC · Apr 15, 2023

Good night, Atty and Kat.

FranC · Apr 15, 2023

We went out for Ice cream cones. Yum.

Palaman · Apr 14, 2023

Well, I wanted to know who has had experience with these two to get an idea of a good choice.

Tor R · Apr 14, 2023

ShowMeTwice said:
It's my understanding that you will need the SXi-Q software (PC or Mac). Have you tried that already???

Here:

SXi-Q Software for PC/MAC-SXmini-Yihi Electronic Co.,ltd.

Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83865833

www.yihisxmini.com

Yihi also lists a few other files under SXi-Tools but I do not know which, if any, of those may or may not be needed???

Here:

SXi-Tools-SXmini-Yihi Electronic Co.,ltd.

Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83865833

www.yihisxmini.com

The current SXmini Vi Class firmware is 23-12-2022-SXmini Vi Class-Firmware-Upgrade-EN-V95 and looks like they posted it on 2023-02-09.

Here:

SXmini Vi class-SXmini-Yihi Electronic Co.,ltd.

Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83865833

www.yihisxmini.com

If you already tried the SXi-Q software and it is not able to connect to the Vi then perhaps they need to upgrade the software??? Or maybe try another USB cable???

Thanks mate,

I've tried both, none of them gave data contact to the mod, reset the counter and charge through the PC so something happens though.
Tried the original usb-c and another usb-c.

ShowMeTwice said:
LOLz.

If I ever buy a mech boro I will only need one RBA to satisfy my needs. The Atmizoo offering meets my needs. I won't purchase a device that has options for panels or buttons. I've no interest in any of that. I would be happy with one boro mech mod. Don't have any interest whatsoever in collecting them.

Naturally . . . that's if I ever decide to buy one. Thus far my ability to say no to boro gear has been very strong.

However, I thoroughly enjoy reading about everyone's boro experiences. And I will gladly help others spend their money on boro stuff.

You have done well to last so long, time to give up the fight and jump into the wonderful world of boro. :greengrin:

DPLongo22 · Apr 14, 2023

DPLongo22 said:
Ya gotta come around more, kiddo.

Tap me later and I'll remind you of all that has been forgotten.

Upon further review, I know less than I thought I did.

@classwife - When Kat edits the first post, the option to change the prefix isn't there. Maybe a time-limited expiration? I do not know.

Latest activity

Latest activity

Filter