Used to buy a lot of juice from them before starting DIY.
Sad...

I have a lot of drip tips for sale. These are all 510 size tips. They are from an out of business sale.
https://i.imgur.com/NdMFVTJ.jpg

$2 each unless marked otherwise. PayPal preferred. Shipping $4. Buy 8 or more ships free.
Purple

Silver

Teal

Red

Blue Speckled

Red Speckled

Polished Silver

Green Speckled

Black Speckled w/green

Black Speckled w/gold

Black Speckled w/blue

Rectangle

Purple Speckled

Wooden $3 each https://i.imgur.com/rwPdpFQ.jpg

Metal rings $3 each https://i.imgur.com/H1IO46m.jpg

Silver Rocket $3 each https://i.imgur.com/RDfzjqv.jpg

Flexible $4 each https://i.imgur.com/v8EYMxv.jpg

Bullet $4 each https://i.imgur.com/Yz1Bnad.jpg

Oriental markings $3 each https://i.imgur.com/myYtoKQ.jpg

Hello Kitty $4 each https://i.imgur.com/wC0yDaj.jpg

iJoy Captain Link Kit 100W by Sourcemore

Captain Link Kit goes to augment iJoy's "Captain" family. The new Mod Mod can be powered by a 18650 cell (with reducer) or by a 21700 and is capable of providing a maximum power of 100 W.
The updated Univ S 2.0 chipset communicates with a 0.96 "color TFT screen, fast charging is type C.
The Captain Pod Tank has 5ml capacity, adopts double slit bottom airflow. The Tank is compatible with new Mesh and Clapton type coils. According to iJoy these Coils are able to offer excellent flavor and a long shelf life.
Enjoy the reading.

Packaging:
The black cardboard box on the front shows; the image of the kit, some main features and the words "iJoy Captain Link Kit" as well as the logo, both in elegant Gold color.

On the back of the package are present; the specifications, content, scratch & check, logos, trademarks, barcode, color of the sample contained in the package and address of Shenzhen iJoy Technology Co. Ltd.



Packing List:
1 * iJoy Captain Link Mod
1 * iJoy Captain Pod Tank
1 * L15 Clapton Mesh Coil 0.15Ω Range 60-80W (Pre-installed)
1 * L5 Mesh Coil 0.5Ω Range 30-50w
1 * 18650 battery adapter
1 * Type-C Cable
1 * User Manual
1 * Warranty Card



Specifications:
• Thread: 510
• Material: zinc alloy, silicone and PCTG
• Dimensions: 40x30x140mm
• Univ S 2.0 chipset
• Screen: 0.96 inch
• Battery: single 18650/21700
• Maximum power: 5-100W
• Resistance Range: 0.05-3.0Ω
• Modes: Power, Temp, TCR
• Temperature Range: 150-300 ° C / 300-600 ° F
• Output Current: 0-45A
• Output Voltage Range: 0-8V
• Charging: Type-C 5V / 1.5A
• Tank dimensions: Ø25x49mm
• Liquid capacity: 5ml
• Type of filling: Bottom filling



Available colours:
I received the Green version of Captain Link for this test, the different choices seem to differ only in the color of the mask which is chromatically matched to the adjustment buttons (Fire, Up, Down).
• Black, SS, Blue, Green, Red.



First impressions:

This is my first review of an iJoy product. For this and other reasons I was very curious to try this Kit.
Since VooPoo started using the classic "circular" tank with fixed drip-tip for DL / RDL and bottom refill, all the main competitors have copied and re-proposed their versions on the theme.
The magnetic base with adjustable AFC could not escape the same fate; convenient and brilliant to apply the Pod to the classic Mods through the 510 thread. It is a simple and winning solution, however there are updated "circular Pods" with replaceable Drip-Tip and refill from the top.

I found other similarities with a very famous and beautiful product from GeeKvape. Captain Link and Aegis Max, in fact, both use a 18650/21700 cell for a Max power of 100W.
The two Mods look pretty similar (in anti-shock type of construction). Sure the Aegis is full IP-67 (Tri-Proof), however I never thought about vaping in the shower.
So for some reasons I believe that the iJoy Link can be a valid and economical alternative, for example, to the competitor VooPoo X Plus which accuses some volt / battery management problems with MTL atomizers installed.
Captain Link is in fact a suitable choice for those who want to use MTL atomizers without voltage drops occurring during cell discharge.
The small size of iJoy Captain Link, its beautiful finishes, the constant power delivery with different types of coils and the possibility of hosting a large 21700 cell seem to be excellent premises ...
I just have to continue to better evaluate this kit.



Feeling:
As I anticipated, the small dimensions are almost record-breaking and the weight is not excessive. Captain Link is very solid and despite being made of zinc alloy it also feels quite light. The four inserts in soft silicone rubber are well positioned and their "striped" surface texture is very pleasant in contact with the fingers.
The handle is really ergonomic with a sizing almost equivalent to that of a tube-mech or semi-mech with 21700. However here we have a nice 0.96 "color display. That's why I feel like saying that iJoy with Captain Link has made a rational work on the dimensions, without neglecting the aesthetic part that is captivating.



Side view:
The frame is in Zinc alloy and the armor (green in this case) ... I think it is made of aluminum is screwed to the mod by means of two torx screws and extends from one side to the other covering the entire rear part dedicated to the handle.
In the center we find the silicone rubber element (1 per side), during the vape this insert comes into contact with the hand and fingers, thus creating comfort and grip. The panels are connected with the front part in order to narrow the section, otherwise towards the handle the panels and the armor take on a rounded shape to improve the feeling with the palm of the hand.



Front and back view:
The screen crosses the entire front area and houses a bright 0.96 "color display in the center that shows all the information useful for vaping.
The Fire, Up and Down keys are slightly protruding, easy to reach and take up the color of the armor. Below we find the Type-C 5V / 1.5A charging socket.

The back (handle) is the most elaborate area of the Mod, the rounded shape is comfortable and the rubbery inserts inserted in the armor vary a little the look compared to the usual eco leather. Personally, I really like this solution for its utility (grip), tactile and aesthetic feeling.



Top and bottom view:
The 510 threaded cup is screwed to the mod via 3 torx screws and has a gold-plated floating pin for better electrical conductivity. Captain Link can accommodate atomizers up to a diameter of 25 / 26mm without protrusion.

On the bottom we find the screw cap of the compartment / battery.
The cap has 3 safety holes for venting and a convenient lifting handle to facilitate cell change. The thread of the cap on the mod has a good smoothness.

Hi has anyone had any problems with the battery of the Tornado EX2? I've had two batteries for just over 4 months and had a big problem with both at different times. I've switched them off at night but when I've come down I've smelt burning, I've noticed the liquid in my pen was bubbling out and the battery was red hot. I think if it had been left any longer it would have exploded.
I threw my first one away as the same happened, but when I went to use it again it kept switching on on it's own. I've gone back to the shop and they said " theyve not had a problem with them", please be vigilant as I dread to think what could have happened if me and my partner wasnt home or still in bed.

Mulwin Q30 Vapor System Starter Kit is a refillable pen-style starter kit, powered by a 350mAh battery. you can enjoy 200-300 puffs at full power, enough to ease your craving for vaping.


Wish you enjoy it!

Hey vapers,

Wanna get an e juice sale for your days? We would love to offer $7 Off Orders Over $89!

See more in vapehammer.com

SMOK RPM 4 Kit perfectly complements the RPM series, is more compact and more convenient, Despite its small size, the 1650mAh built-in battery can ensure long-term vaping fun. The battery can provide ample power and strong performance for each puff. Once the power supply disappears, the small pod system can be fully charged again in a short time through the Type-C connection, allowing you to focus on vaping and prepare for new possibilities. The RPM 4 vape kit can achieve an output power of 5 to 60W, which can utilize the full potential of RPM and LP2 coils. Whether you like thick vapor or pure taste, a wide range of power adjustments can make you enjoy endless aftertastes, resulting in a pleasant taste. The chipset itself can recognize many parameters, and the user will receive detailed information about the coil used and the output. Featuring a 0.96 inch TFT display - rich vape data and customizable theme colors are perfectly matched to provide a more intuitive vaping experience.





Features:
1. Latest Leak Proof Technology
2. RPM 4 LP2 Pod, compatible with LP2 coils
3. RPM 4 RPM Pod, compatible with RPM coils
4. Stepless Airflow Control
5. 60W Max Power
6. 1650mAh Built-in Battery
7. 5ml E-liquid Capacity
...

Click here for more:

Smok RPM4 Kit: Smok RPM4 Pod Mod Kit | Healthcabin

Smoant Veer Pod Kit is a simple yet elegant pod system kit. It features 750mAh battery capacity and 2.3ml e-juice capacity. It adopts baby 0.6ohm mesh coil and 1.2ohm NI-80 coil. Side-fill pod will help avoid e-liquid leakage and reduce the mess. You can install the pod in different directions to get 2 different airflow: MTL or DTL. A LED light is designed to show you the battery level.





Features:
1. Super light weight
2. 2 different airflow: MTL and DTL
3. 2.3ml side-fill cartridge
4. Compatible with baby series coil
...

Click here for more:

Smoant Veer Kit: Smoant Veer Pod System Kit 750mAh 2.3ml

Smoant Veer Pod: Smoant Veer Pod Cartridge 2.3ml

Good News! Freemax will release another new vape kit - Marvos 60W Kit, which will be a new member of Marvos Series Kits. What’s more, Freemax Marvos 60W Kit is also inspired by Fireluke series Tank, the same as Freemax Marvos T 80W Kit, offering users fantastic flavor with massive clouds.

Freemax Marvos 60W Kit is one compact tri-proof flavor vape device: Water-resistant, Dust-resistant, Shock-resistant. And it will release on 18th, June. Please stay tuned.



For more information about Freemax vape devices, please visit Freemax official vape website: Freemax - Taste the Clouds, Feel the Flavors!

Let's check 2 new atomizers today. One is RDA (Rebuildable Tank Atomizer) -Wotofo SRPNT , another one is RDTA (Rebuildable Dripping Tank Atomizer) - THC Artemis V1.5.

Come to check which one attracts you most?

Wotofo SRPNT RDA


1. Single 5mm wire building/Dual 3mm wires building
2. Accurate airflow control on the side
3. 810 resin Drip Tip with comfortable rim
4. Bottom 510 Pin to match with squonk box

Size: Ø24 x 22.7mm(Without 810 Drip Tip & 510 Pin)
Color: Black, SS, Gun Metal, Blue, Rainbow, Gold

THC Artemis V1.5 RDTA

1. 2ml/4ml capacity, 810 Resin Drip Tip, easy to refill with wide slot design
2. 26pcs honeycomb airholes from double sides to provide excellent flavor
3. Postless single-build deck, with strong ceramic clamp system
4. BF Pin to match with squonk box

Size: Ø24 x 38.5mm
Capacity: 2ml
Color: SS, Black, Gun, Blue, Gold, Silver Black

Learn More: (Login first to check better wholesale price)
THC Artemis V1.5 RDTA
Wotofo SRPNT RDA

Elego 10th Anniversary Sale stills on! Join us now to get the biggest discount ever.


Elego provides the most compatitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about or any vape wholesale in China, feel free to contact us.

I just pulled the trigger on some Nude EJuice from EJuice Deals.

Anyone tried their fruit flavors?

I got 8 flavors at 6mg, 120ml. It was $5 each after coupon. I guess I’ll be good on juice for awhile.

Today,I will introduce you Vaporesso LUXE 80 uk.It is small and solid.The kit has the beautiful pattern.How does it work?Let's take a look for it.

Vaporesso LUXE 80 pod mod kit uk near me is the latest 80W Pod Mod to debut from the LUXE series. Including all the features you have come to expect from a luxury/stylish series, LUXE 80's exceptionally compact style, and classic appearance bring you an unmatched vaping experience. SSS leak-resistant technology now includes an additional outer layer of protection. An extra Red Ring provides Vaporesso products with an added level of protection for your e-juice. Luxe 80 is portable luxury in your pocket.Please click best online vape store to learn more details.

SPECIFICATION
Size:111.1 * 28 * 39.4mm
Battery:2500mAh
Output Wattage:5-80W
Display:0.96 inch TFT Screen
POD Capacity:5ml
Coil: GTX 0.2ohm MESH Coil (45-60W), GTX 0.3ohm MESH Coil (32-45W)
Charging:Type-C, 5V/2A

Quick Link:Vaporesso LUXE 80 Pod Mod Kit 2500mAh 80W

Hey guys. Today let's look at the Luxe 80 Kit by Vaporesso. It is the latest pod mod device in the Luxe line till now, so what are the new features about it? Let's find it out!

Luxe 80 gives you a luxurious feel combined with a classic appearance. The ergonomic body has a compact design, and the size is more refined than the previous. Powered by a built-in 2500mAh battery, it supports Type-C 2A fast charging which means it only takes 75 minutes to finish a charge. On the control face, there is a 0.96" TFT Screen to show all the vaping data clearly, very user-friendly. The fire button is located at the top, Luxe 80's built-in AXON chip can fire immediately at a speed of 0.001s when ignition.

Below the fire button are two adjustment buttons, you can freely switch the wattage to what you want. In addition, Vaporesso Luxe 80 is equipped with SSS leak-resistant technology, it extends the life of your favorite e-juice by building a barrier and locking the juice in. The red ring-added layer of protection perfecting leak-proof precision from the inside to the battery. The 5ml pod tank has convenient airflow adjustment, the magnets are designed to allow for a precise airflow adjustment, giving you control of the amount of vapor that you desire.

Check for more details here: Vaporesso LUXE 80 Pod Mod Kit 2500mAh 80W

You may also like:
cheap bmor selva
airis dabble review

Digiflavor DROP SOLO RDA V1.5 $15.6


Efun.top new arrival New Arrival
Sale Products Efun.top Vape Sales Online Shop

Hi ECF members, In this review i take a look at the Sensis Pod Mod from Innokin. The Innokin Sensis was supplied for the purpose of this review by Timmy from Innokin.

Sensis - Product | INNOKIN®




Introduction

Innokin are one of the old guard when it comes to vaping manufactures yet they have not only stayed relevant but are also leading the way in innovation. The Sensis is a Pod Mod that introduces brand new technology which both improves flavour but also coil longevity by using a coil refresh feature and new F0 technology which uses AC Current! After using the device for a while i am very impressed so i will crack on and share my thoughts!

___________________________________________________________________



In The Box



Contents:

1x Innokin Sensis Pod Kit (0.25ohm)
1x Spare Sceptre Coil (0.65ohm)
1x Spare MTL Drip Tip
1x Spare O Rings
1x Coil Base
1x 510 Adapter
1x Type-C Charging Cable
1x Manual

___________________________________________________________________



Aesthetics and Ergonomics

I am not going to go into great detail here as there is a lot to cover in the review and a lot of these pod mods have a very similar form factor and of course photos are included.

What i do want to point out is the build quality is excellent and as you would expect with the form factor it's particularly ergonomic and comfortable to both carry around and fire.

The main Zinc Alloy chassis is black and the colour choice refers to the padded leather spine which comes in either Carbon, Desert Brown, Navy Blue, Ultra Pink or Jet Black, this is fixed in place by a bracket which will also differ in colour depending on the chosen colour of the spine.

The front plastic panel is also the fire bar which needs pressing towards the top, the fire bar has both an integrated screen and horizontal navigational rocker. Below the fire bar we have a type C USB port and on the neck at the rear of the device an adjustable airflow lever as seen on other devices such as the Drag X!

The Pod/Tank is rounded and protrudes from the top pod bay, the pod is glass and has a removable 510 drip tip allowing your own to be fitted, the pod will be covered in more detail in a different section!



___________________________________________________________________



Sensis Specs and Features:

Device dimensions Without pod: 93.5x39.51x30.0mm
With pod: 120.35*39.51*30.0mm
Tank capacity: 3.1ml (2ml TPD)
Coil: Sceptre S-Coil 0.25ohm, 25-35W (New)
Coil Material: KAL + Seaweed fibre cotton
Changeable glass: No
Airflow: Adjustable
How to fill: Bottom filling
Coil compatibility: Sceptre Coils
Battery: Internal 3.7V，3000mAh/11.1Wh
Wattage range: 6-40W
Voltage range: 1-7.5V
TC range: n/a
Cut off time: 3-18s
Tank Used with Sensis tank, or with Sensis 510 adapter that can use with other tanks.
Max output current: 20A
Resistance range: 0.2-3.5ohm
Body material: Zinc alloy
Connection Magnet
Charging current: 5V 1.7A
Charging indicator: Charge bar
Battery capacity indicator:＜20% - Red; 20%-50% - Yellow; ＞50% - Green
Colour: Carbon, Desert Brown, Navy Blue, Ultra Pink, Jet Black



___________________________________________________________________



What You Receive?

You receive the Sensis pod mod with a 3.1ml capacity pod/tank which in my case being the TPD version unfortunately has a silicone capacity reducer fitted making it 2ml. The Sensis comes pre-installed with a RDL 510 drip tip and 0.25ohm coil.

You also receive a manual, MTL 510 drip tip, 0.65ohm MTL coil, spare O-rings, 510 adaptor and Type C quick charge cable!



___________________________________________________________________



The Pod

The Pod for the Sensis is rounded like we saw with the Voopoo Drag X and similar pod mods but is smaller and made of glass which gives it a better quality feel and look. At the top we also have a metal standard 510 fitting which is another improvement compared to other pod/tanks of this style and included is both RDL and MTL drip tips, the drip tips are perfectly ok but just not what i would go for personally especially where the MTL is concerned as i prefer very narrow long MTL drip tips, but no problem i just fitted one of my own! What is good about this style of pod/tank is most of it protrudes outside the pods bay and you get 360 degree visibility of your e-juice!

Looking at it's circular base we have 3 evenly placed strong magnets and a silicone bung, again a design we have seen many times. The bung has a flap which is easy to lift to pull the bung out revealing a very generous fill port plenty big enough for a quick, mess free fill.

Once the coil base is fitted to the coil head it just gets press fitted into the pod as is the case with most of these pod mod pods/tanks!



___________________________________________________________________



Fitting The Pod

The Pod bay again utilises the design first seen on the Drag X and used many times since. The bottom of the bay only has the round central section visible with the rest of the floor which leads to the airflow mechanism being obscured by the perimeter having an upper metallic shelf for the pod magnets to attract too. Looking at the bottom of the bay we have a raised central positive and outer raised negative spring loaded contacts which look to have a silicone seal.

The pod snaps into place and fits very securely, the dual negatives and metallic surround shelf design means the pod can be fitted without it needing to be lined up a certain way, no wonder we see it time and time again because it's a very good design!



___________________________________________________________________



Included 510 Adaptor

To allow the use of normal 510 threaded tanks also included is a sturdy 510 adaptor that fits in position securely apart from it rotates which is one of the very few cons i have. It works fine and i could enjoy using my favourite RTA's on the Sensis but you need to fit the tank onto the adaptor first and then fit in place else as the tank is turned to secure the adaptor just turns with it.

It also means adjusting airflow while attached is almost impossible and even unscrewing a top-cap to fill becomes a chore as you battle the adaptor which just wants to turn with the tank. It means that airflow adjustments need making before attaching and i found just pulling the tank with adaptor out of the Sensis before filling was easiest but once in use it works well!



___________________________________________________________________



The Coils



Pre-installed we have the 0.25ohm Kanthal Mesh with Seaweed Fibre Cotton S-Coil which is rated between 25w - 35w, also included for a medium to loose MTL is the 0.65ohm Kanthal Sceptre Coil which is rated between 9w - 12w.

Also compatible and sent for me to try are the other Sceptre coils which are the 1.2ohm NI-CR MTL rated between 8w - 9.5w and the 0.5ohm Kanthal Mesh RDL coil rated between 18w - 20w.



For the coil to extend down to the positive and negative contacts a coil base section first needs fitting to the base of the coil which is easy enough and then just press fit the coil assembly into the bottom of the pod and fill!





___________________________________________________________________



The Airflow

For such an innovative device there is a lot copied from the Drag X as it seems with the adjustable lever toward the top of the rear of the device. Although it looks the same the side vents on the Sensis look to be for internal venting and nothing to do with airflow, the airflow on this is much simpler, the lever slot is the airflow slot rather than a control to adjust two other slots.

Simply move the lever to the right to increase the airflow and move to the left to decrease airflow. Being just one slot means the Sensis gives less air than can be achieved with the Drag X but that suits the device and available coils being only 40W max and much more suited to RDL and MTL vaping, it also gives less air leakage so airflow adjustment i found worked much better than on the Drag X!



___________________________________________________________________



Battery and Charging

The Sensis has an in-built 3000mAh battery and while charging good feedback is given, it also allows for passthrough vaping which for those with just this device available will find handy. The device has a Type C USB connection and supports a 1.7A charge rate so the device can charge both quickly and safely!



___________________________________________________________________



The Display

The Sensis display gives plenty of info although some of the lower font might be a little hard to read for those with not great eyesight, after saying that it's bright, sharp and uses colour sparingly which i find pleasing to the eye!

Top left we have the mode which will be W (normal variable wattage), V (Normal Variable Voltage), F0 (Find your frequency mode), or W+, V+ (wattage or voltage when using Coil +), top right we have the battery status bar.

Underneath the information given we have the wattage or Voltage depending which mode you are in. The lower section of the display shows to the left vape time followed by your puff count and to the right we have resistance followed by bottom right the voltage which instead will display wattage in voltage modes or the frequency when using F0!



___________________________________________________________________



Operating The Sensis

The Sensis is 3 clicks of the fire button to turn on and pressing fire and right together locks the navigational rocker but the device will still fire, when locked a padlock will appear under the mode and fire and right again unlocks. Pressing fire and left together brings up a screen showing the voltage on the battery, resistance of the coil and puff count, it also has an option to reset the puffs!

To enter the main menu is pressing both sides of the navigational rocker together which when you first get the device brings up Power, Coil+, Refresh, Locked F0 feature, Settings and Exit.

Selecting the F0 mode brings up were you need to enter a code to unlock which is "++-+-+ and then fire", now the new mode appears at the top of the menu list!

When selecting F0 it allows you to select an AC frequency which is something you can just play around with to find the best for different coil and juice combinations, for now i have just set it to 75hertz, there is also a Find F group on Facebook where people can discuss which frequency they find best for which coil which will be a good resource for some but i'm just the type who likes to find out over time for myself!

Selecting Power allows you to choose between Wattage or Voltage modes while selecting Coil+ also gives the option of running coil+ in either wattage or voltage. Refresh seems to be a more aggressive form of Coil+ which can be implemented manually whenever you feel your coil needs a bit of extra life injecting into it (flavour definitely improves after a refresh), this gives you the option of either a 4 or 8 second refresh!

Selecting Settings brings up the following options, Op,Screen, Timeout, Cutoff, Device ID, Reset, Exit. These settings don't need to be explained as they are standard seen on most devices but the Op, Screen allows you to change from the default Pro working screen to a more minimalistic display which doesn't give information like puffs etc although it still keeps a count and you can check puffs as explained earlier by pressing fire and left together. Finally to change the wattage you have to hold down either the right or left side of the rocker for a couple of seconds which will cause the wattage to flash, it can now be adjusted in 0.5w increments from 6w up to 40W. Below the new modes and features are explained!



___________________________________________________________________



Coil +

The Coil+ mode is a new feature you can activate which automatically primes the coil at the end of each puff by drawing in more liquid and reducing carbon on the coil. Coil+ does this by running at 40% of your selected wattage for 0.4s at the end of each vape.



___________________________________________________________________



Refresh

Refresh is a new feature that allows you to manually refresh the coil between hits to provide better wicking, bringing in flavour to extend the coils life. Like Coil+, Refresh does this by running at 40% of your set wattage, drawing in more liquid.



___________________________________________________________________



Find Your Frequency (FØ)

FØ uses alternating current (AC) to produce a waveform that runs continuously while you vape. This is possible by sending an electrical output in a much more precise and efficient way through the coil.

You can adjust the hertz output to match your coil and e-liquid. When properly matched to your atomizer, FØ will extend coil life, provide smoother heat transfer, and even enhance specific flavors in e-liquid. AC will heat your e-liquid at a gradual rate, ensuring that it does not burn and produce a bad taste, so many of us have experienced.



(Disclaimer: After testing the device i really couldn't see how i could explain the new technology any better than Innokin themselves so the above information was a copy and paste from their website)

___________________________________________________________________



My Experience Using The Sensis And Thoughts!

I absolutely have been loving this device and the new technology, in my opinion the Sensis is head and shoulders above any other pod mod i have used, the flavour from all 4 coils is superior to any of the Voopoo PnP or Vaporesso GTX coils and it's no gimmick the new technology works giving incredible coil life!

Like anything though it's not perfect and although it's entirely subjective i would of course much prefer to be able to swap out the battery, after saying that the battery life is very good lasting over a day with the MTL coils at 10W and 9W and even with the 0.25ohm coil at 25w it lasted almost a full day and charging is quick while also supporting passthrough!

The supplied drip tips are just not to my liking personally but then a pro that it's a standard 510 fitting so you can fit your favourite, also the biggest con is the 510 adaptor. It slots in place nicely and looks the business, tanks perform perfectly ok but the fact that it rotates when turning the tank means you can't adjust airflow and even filling is a chore with the tank attached.

I like the glass pod/tank it just looks really good quality and maybe being glass is also contributing to the great flavour i have been getting, yes i also prefer top-fill but filling via the bottom port is quick and mess free and also you get great visibility of your juice level at all times.

The airflow adjustment works very well allowing depending which coil is used anything form a semi restrictive direct lung draw through to a medium tight MTL, which is a much tighter MTL than other similar devices allow for.

I know someone who got over 3.500 puffs from just one coil and reading posts on the Find F Facebook page it seems people are getting anything from 3000 to 5000 puffs from just one coil showing the technology works and i am far from on my own finding the flavour from all coils quite outstanding with the 0.25ohm coil possibly having the edge.

I myself stuck to the one coil for a long time which was the 0.65ohm coil at 10W, i used it with Coil+ for a while before setting up F0 mode at 75hertz and doing a 4 second refresh every 300 puffs. I got to 3.650 puffs and have saved the coil because it still has plenty of life but i needed to crack on and test out the other three coils for performance and flavour.

Finally i have suffered zero leaking and have just got the occasional spots of condensation which is that slight it's hardly worth mentioning! To sum up i am a very happy camper!



___________________________________________________________________



Likes

Excellent build quality
5 Spine options
Innovation (brand new technology)
F0, Coil+ modes
Refresh feature
New S-Coil with Seaweed wicking gives great flavour
Included 0.65ohm MTL Sceptre Coil also performed excellently (again excellent flavour)
Compatible with other Sceptre coils including the 1.2ohm (tighter MTL)
Airflow adjustability very good
Glass Pod
Metal 510 drip tip fitting (can fit your own)
RDL and MTL drip ips included (see dislikes)
510 adaptor included (see dislikes)
Quick and mess free filling
360 degree visibility of e-liquid in the pod/tank
Suffered zero leaking and just the slightest spots of condensation
Very good battery life
Nice display and user friendly interface
Type C USB
Charges quickly and supports passthrough



Dislikes

510 adaptor rotates
In-built battery (subjective)
Not a fan of the drip tips (just fitted my own)
Some of the design not original
Need to remove pod to fill

I would once again like to thank Timmy from Innokin for supplying the Sensis for the purpose of this review, thanks for reading and stay safe!

Sensis - Product | INNOKIN®

___________________________________________________________________

I received z max from Geekvape for the purpose of this review.

Geekvape z max tank colors:

- Gunmetal
- Black
- SS
- Gold
- Blue
- Rainbow





Specifications:

- E-juice Capacity: 4ml/2ml
- Filling Type: Top filling
- Diameter: 26mm
- Drip Tip: 810 drip tip
- Coil: GeekVape M 0.14ohm and 0.2ohm coils (included)
- Coil Compatibility: GeekVape M series coil

In the box:

1* GeekVape Z Max Tank (4ml)
1* GeekVape M Series Coil 0.14ohm (60-80W, pre-installed)
1* GeekVape M Series Coil 0.2ohm (70-85W, spare Coil)
1* Spare Glass Tube
1* Spare Parts Pack
1* Spare Parts Pack
1* Drip Tip




Z max sub ohm atomizer is 26mm in diameter and in the package with this atomizer you will receive spare bubble tank, two coils and spare drip tip which is really good. Build quality of the atomizer is really good, everything is as it should be. On the atomizer you can see some details, you can see engravings on the top cap and on the base so you can easily grab each and on the top cap you can also see two engravings "Geekvape", on the chamber you can see logo.









You will receive this atomizer with 810 drip tip preinstalled which is good because you can use any other 810 drip tip here if you want. In the package you will receive one extra 810 drip tip which is good. We have top fill system here and you need a quarter turn to take off the top cap. When you take top cap off you can see two big fill holes and you can really easy fill the tank, in my opinion best top fill system.











This is a top airflow atomizer. Many people like top airflow atomizer because it can't leak. Under the top cap you can see the airflow control ring and it stays here because of o ring which means that you can take it off if you want and clean atomizer. You can see here two airflow slots, you can adjust the airflow easy and what you adjust on one side it will be the same on the another side.
Capacity of the bubble glass tank is 4ml which is okay capacity and for many it will be good. With this atomizer you will receive spare bubble glass tank but also you can choose the version with regular glass tank and 2ml capacity if you want that.






On this atomizer you can replace the coil from the bottom of the tank, you need to unscrew the base and then you can just take off the coil simple and fast. With this atomizer you will receive two coils, one in the atomizer and one in the package. The coil that you will receive preinstalled is mesh coil with 0.14ohm resistance and recommended power for this coil is 60-80w. The coil that you will receive in the package is triple mesh coil and resistance of this coil is 0.2ohm, recommended power for this coil is 70-85w. This atomizer is compatible with M coils.









My thoughts:

So build quality of the atomizer is very good and everything is as it should be. Package is also okay because you will receive spare tank, two coils and two drip tips. Top fill system works really good and in my opinion this is the best top fill system. Airflow from top also works great, it can't leak and you can adjust the airflow very easy. You can replace the coil from the bottom and you can do it really fast. I tried here both coils and in my opinion triple mesh coil is better, flavor is very good. Vapor production is also very good since this coils work at high power. I personally like to close airflow a bit to make it restrictive. Geekvape z max is very solid sub ohm tank, it works as supposed to and there is nothing to complain about this atomizer.

Cons:

- Nothing important to pick



Pros:

- Good build quality
- Two drip tips
- Easy to fill
- Easy to replace the coil
- Good flavor
- Top airflow, leakproof
- 4ml capacity


Thanks Geekvape
You can check it here: Z max

Hello again and welcome back for today's review of the Marvos T Kit that was sent to me from Freemax for the purpose of this review. The Marvos T 80w Kit is a wattage only device that houses a 3000mAH built in battery and uses 3 different power outputs depending on which of the 2 coils are used, maximum output wattage is 80w. Freemax has gone back to a cylindrical style of device like the Twister 80 they introduced earlier in 2019. I think the Marvos T Kit has many quality's that will make vapers happy, so lets kick the review off with some info first.


COLOR CHOICES





INCLUDED IN THE KIT





SPECIFICATIONS





MARVOS 4.5ML CAPACITY POD ( BOTTOM FILL )





SPITBACK PREVENTION





STRONG MAGNETIC CONNECTION





OPTIONAL BOROSILICATE GLASS POD





INSPIRED NEW DESIGN





PCTG AND BOROSILICATE GLASS POD SPECIFICATIONS





NEW MS MESH COILS





3000 MAH BUILT IN BATTERY





3 POWER LEVEL ADJUSTMENTS





8 SAFETY PROTECTIONS





2 SIDED AIRFLOW CONTROL ADJUSTMENT





FIRST IMPRESSIONS


As most vape device kits do, the Marvos T Kit slides out from a outer sleeve and has it's pieces in individual cut outs, your owners manual as well as other paper information is below the kit contents as well as the charge cord, very nice presentation. The optional Borosilicate glass pod was also sent for review and is pictured outside the box.






The first thing I wanted to do was compare the 2 pods and see the differences from the stock PCTG and Borosilicate glass. There were 3 differences between both pods, on the glass pod the mouthpiece seemed to have a wider opening by a very small margin and the body of the mouthpiece appeared to be shorter also. The 3rd difference is in the fill port, with the PCTG fill port if using a 100ml bottle the bottle tip will fully insert into the pod while the same bottle tip will only rest on top of the glass one. I never encountered a mess using either pod, both are bottom fill using a plug style gasket. The PCTG pod is on the left side and the Borosilicate glass pod is on the right side.





Both pods use magnets to connect to the device, the connection point is recessed into the device with 2 metal contact pins in the center that contact the coil. The fill port gasket plug has a little indent on it's side aiding in opening, Freemax is stamped on it.





Airflow on the Marvos T is very smooth with no whistle or funny sounds at any setting of airflow control ring that's made partly because it has such a direct feed to the coil once the pod recesses down with connection. Pictured is the stock PCTG pod. Notice on the bottom right side of the pod is the little indent of the fill port plug I spoke of earlier.





Freemax decided to go back to a tube styled device like it's Twister 80 that was released in 2019, the 1 negative with tube styled devices is that they are very easily tipped over especially if they are long with not a lot of girth for a stable platform when standing upright.

I reviewed the Twister 80 and at the time really liked it but adding a tank really made it very top heavy I found out later after the review by knocking it over and breaking one of the glass tubes.

The Twister had a 2300 mAH built in battery and used a wattage adjustment dial located on the base of the device that would sometimes feel like it was not sitting level and flush on a table especially because it was long and skinny.

The Marvos T solved that problem and increased battery capacity to 3000 mAH also, with the bigger battery came larger girth as well as a shorter device.

Having a pod that sits recessed into the device not only gives it a streamlined appearance but also makes it less top heavy.

Another problem with a tube styled device is locating the fire button without looking for it, the Marvos T solved that issue by raising the fire button just enough to feel it without being obtrusive in any way.

The button is black with a clear inner ring the lights when vaping or selecting a power level. On the backside of the power button directly across from it is where the type-c charge port is located. Pictured with the PCTG pod installed.





When charging the device a solid red light will emit from the fire button letting you know it's charging and when the 2a charging is complete the light will turn off. A complete charge usually takes 90 minutes.





The Marvos T uses colored lights to tell you the strength level of the battery while your vaping ( GREEN - 67%-100% ) ( BLUE - 33%-67% ) ( RED - 0%-33% ).

Turning the Marvos T on/off is done with 5 presses of the fire button, once on 3 presses of the fire button selects your power level that is also color coded with lights.

MS 0.25Ω COIL

* SOFT ( RED - 40W )

* MEDIUM ( BLUE - 50W )

* STRONG ( GREEN - 55W )


MS 0.15Ω COIL

* SOFT ( RED - 60W )

* MEDIUM ( BLUE - 70W )

* STRONG ( GREEN - 80W )









FINAL IMPRESSIONS OF THE MARVOS T KIT





I have to say that at first glance I liked it on appearance alone. After picking it up placing a pod on and getting a feel of it I really liked it mainly because of the thick girth and shortness of the whole kit with pod attached.

I removed the pod and began to charge the Marvose T to a 100% full charge and noticed how bright and vibrant the color was. I also like the blue colored coil o rings.

I started off with the 0.25Ω coil and after priming it , filling the pod and letting it sit for 10 minutes to fully absorb the juice I started on the low setting ( red ) and tried about 15 or 20 vapes to gently break the coil in. These are Freemax coils so I knew the flavor should be fantastic and it was but a bit to cool for my style of vaping.

Next I hit the fire button 3 times and switched over to the medium strength ( blue ) and the warmth did increase but not to my happy state, It was better than the soft setting but I needed more wattage and warmth so I pressed the fire button 3 times again to reach the strong setting ( green ) and the warmth I like in a vape appeared.

Flavor was there in the soft and medium but more saturation as well as the warmth I like came through the best in the strong setting ( green ). This was done using the glass pod for all testing of the 0.25Ω coil.


For the 0.15Ω coil I used the PCTG stock pod with pretty much the same results but was happy in the medium power setting but the strong setting was the best with the 0.15Ω coil as well.

Both pods vape pretty much the same but for some reason I think I prefer the stock pod which really surprised me because given a choice of plastic or glass I will take glass every time.

Speaking of glass I noticed that Freemax says this is the first glass pod on the market for a pod mod but I have to correct them because the Innokin Sensis was the first to use a optional glass pod with the Sensis that I reviewed 4 months ago.


The Marvos T has a thirsty appetite but it doesn't plow through juice like I thought it would. There is one other big plus that I have to point out and it's the ability to stay completely dry of any condensation. Every pod device I have reviewed that uses this attachment method for the pod will always have condensation build up on the bottom of the pod or inside the base of the device, with probably 12-15 pod fills of each pod they have stayed completely condensation free.

I have nothing but praise for the Marvos T Kit because of fantastic flavor, short girthy device and ease of use with a built in battery making it basically maintenance free, just fill and charge. The Freemax Marvos T Kit is a winner in my book.


In closing I would like to thank Tina and Freemax for providing the Marvos T Kit for the purpose of this review.

THANK YOU READERS
BIGBOB2322

This isn't specifically vape related, but I decided to post it here anyway.

Ignoring scientific truths has a human cost. Using science to undermine itself might be clever, and a means to buy time, but the truth always comes out at the end of the day. Facts will prevail.

Click to expand...

Manufacturing Ignorance - Top Documentary Films

this is a every day thing for me.it might have to do with age or ripping and running all day.just having three out seems to help.how do you manage?

My Freedom Smokes has closed and I really like their Nicotine. Any suggestions on something similar?

I wondering what other people are experiencing with the pod life for the Luxe Q. I am currently using Kapow Strappy nic salt, 20 mg. I'm not a chain vaper, but I only seem to be getting 2 -3 days from either the 1.2 or 0.8 pods. Aside from that I really do like this pod system.
Thanks

Sent from my SM-G973W using Tapatalk

Hi, let's List Out some of YOUR FAVORITE nicQuid brewers that (have so far) SURVIVED the FDA's PMTA regulations.

Here's a list posted courtesy of @UncleJunkle: FDA POSTS OFFICIAL PMTA LIST OF DEEMED NEW TOBACCO PRODUCTS

A Huge Relief pour moi > start with my GoTo & Favorite which cost them MILLIONS $$$$$: HALO. They're @ #188 - Nicopure Labs LLC (Halo).

I tried some tobacco flavored e-juices a long time ago and disliked them because they all tasted like nuts (peanuts if I remember correctly). I'm getting into DIY flavors after vaping flavorless for years and thought to try making my own tobacco flavored juice if I can find some tobacco flavors without that nutty taste. Just straight, mild-ish, moist tobacco without any fruit or spice components. Mildly sweet is ok, but not caramel-ish. Is this a tall order?

Thanks!

Does anyone have any lying around? I still have my tank and LOVE it, but I am down to ONE coil. EEEP! I prefer the .25 ceramic coil but will take .5 too.

Thanks!