First and foremost- Ive been around the site a while just new to posting. Hopefully I put this thread in the correct location. If I put this in the wrong spot, I'm sorry. And I tried to find adequate information from other posts but was unable to do so. So decided to post a new thread.
Ok, so I've read a number of posts and watched a number of videos to supposedly stop the T3 from gurgling when it gets low. I love this clearo but this is my only issue with it. I've tried a number of the recommendations without success. Wondering what any of you have tried that works. And no, I've yet to recoil it myself as I do not have the materials to do so.
I've added an extra flavor wick (no change, if anything my flavor is muted a bit)
I've flipped the silica ring over (it then began gurgling after 1/3 of tank instead of when it only has 1/3 tank left.
I have, whenever possible, left my system upside down so that the wicks do not saturate and flood the inner tube. This doesn't really do much either. And it's annoying.
I have heard that if I take the evod base and coil and put the t3 silica ring (flipped upside down) on top of the evod ring that all my problems will be solved. Have you found this to be true? I have a few EVODS, but I use them and don't have an extra base laying around. Is there a place that I can buy just the evod bases?
I would also hate to do thT and then be left with half a dozen T3 base/coils that would just collect dust. I don't like to waste stuff. If I did take from my evod and then took my T3 base and put it in my evod would it allow me to still use my EVODS?
In theory I can just refill it when it has 1/3 of a tank left. But if I'm out and about one day it's annoying that there's 1/3 in my tank that is simply not usable. I might as well just use the EVODS. But I have like 6 T3 clearos and I don't want to waste them.
Also, the T3 upgrade base that I have seen online, does this solve that problem? If I understand correctly it basically turns the T3 into a T3S, is that correct? Do the T3S clearos not gurgle when the tank is low? And if I were to buy the upgrade base, will evod heads fit in them? I have a few extra evod heads but as stated I do not have any extra bases.
I've also hear thicker juices sometimes work better. Most of the juice I've found myself using is fairly thin. It's not by choice, it's just what I've found that I like.
If if helps any- I use 2 joyetech 900 twists and a 350 mini ego (although the mini usually gets the EVODS put on it for some reason)
Thanks in advance for any suggestions/information/feedback.
Ok, so I've read a number of posts and watched a number of videos to supposedly stop the T3 from gurgling when it gets low. I love this clearo but this is my only issue with it. I've tried a number of the recommendations without success. Wondering what any of you have tried that works. And no, I've yet to recoil it myself as I do not have the materials to do so.
I've added an extra flavor wick (no change, if anything my flavor is muted a bit)
I've flipped the silica ring over (it then began gurgling after 1/3 of tank instead of when it only has 1/3 tank left.
I have, whenever possible, left my system upside down so that the wicks do not saturate and flood the inner tube. This doesn't really do much either. And it's annoying.
I have heard that if I take the evod base and coil and put the t3 silica ring (flipped upside down) on top of the evod ring that all my problems will be solved. Have you found this to be true? I have a few EVODS, but I use them and don't have an extra base laying around. Is there a place that I can buy just the evod bases?
I would also hate to do thT and then be left with half a dozen T3 base/coils that would just collect dust. I don't like to waste stuff. If I did take from my evod and then took my T3 base and put it in my evod would it allow me to still use my EVODS?
In theory I can just refill it when it has 1/3 of a tank left. But if I'm out and about one day it's annoying that there's 1/3 in my tank that is simply not usable. I might as well just use the EVODS. But I have like 6 T3 clearos and I don't want to waste them.
Also, the T3 upgrade base that I have seen online, does this solve that problem? If I understand correctly it basically turns the T3 into a T3S, is that correct? Do the T3S clearos not gurgle when the tank is low? And if I were to buy the upgrade base, will evod heads fit in them? I have a few extra evod heads but as stated I do not have any extra bases.
I've also hear thicker juices sometimes work better. Most of the juice I've found myself using is fairly thin. It's not by choice, it's just what I've found that I like.
If if helps any- I use 2 joyetech 900 twists and a 350 mini ego (although the mini usually gets the EVODS put on it for some reason)
Thanks in advance for any suggestions/information/feedback.