Vg: 80% + pg: 20%
vg: 70% + pg: 30%
vg: 60% + pg: 40%
vg: 50% + pg: 50%
vg: 70% + pg: 30%
vg: 60% + pg: 40%
vg: 50% + pg: 50%
When I mix I usually do a 3:1 ratio of PG to VG.
can you just add a few drops of vg to premixed eliquids to make better vapor?
can you just add a few drops of vg to premixed eliquids to make better vapor?
... and a drop in nicotine concentration, with a resultant loss of THI don't see why not. Just make sure you mix it up well before you fill a cart with it.
Also, be prepared for a change in the flavor.
FWIR, a ratio of 80/20 or even 75/25 is a happy medium for good TH and decent vapour. When mixing, I personally start with a "base" liquid.
TH is increased by either using high nic or adding PGA to your mix.
Vapour can be increased by adding distilled H20, not necessarily "more" VG.
There are so many variables, enough to go "wonky". I believe in the KISS principle.
Base liquid
I start by using high concentration nic juice and reduce it to a reasonable % of nicotine e.g 50mgs---->18 or 24mg. This is accomplished by:
- starting mg and target mg
You now have your base liquid at whatever nicotine concentration you want. From there I flavor. The reduction in nicotine content is really insignificant, and you always have a base on hand and trying something new becomes relatively simple, you just flavour the base.
- pg/vg ratio simple just put it 20 or 25% in the VG slot. The calculator will tell you how much PG needs to be added
Use FlavourArt flavors. They are powerful and require only a few drops per 5ml batch. I mix 15ml batches and use only 5-20 drops of flavourant (2%-4% of total mix.)
If I bought 30ml of flavorless 36mg 80pg/20vg and 0 nic 80pg/20vg can i just take out 15 ml of the 36mg add 15ml of the 0 nic and then pour a little into a 5ml bottle and add a flavor? would this work?