Introducing the New SMOKTech Magnetic Bolt Mechanical 18650 Magnetic Switch - ALL COLORS

[dannoman]

SMOKTech Magnetic Bolt 18650 Magnetic Switch - ALL COLORS

Introducing the latest SMOKtech Bolt made of anodized aluminum WITH a Magnetic Switch. The anodized surface has a great sheen to it and looks great with no fingerprint problems. It is designed to hold a protected 18650 3.7 volt button or flat top battery but also takes regular IMR un-protected batteries. By protected batteries we mean those we carry such as the Panasonic or eFest protected that have additional electronics in them for safety but add to the length of the battery. IMR in and of itself is actually a form of protection.

This will work excellently with a 1.5 ohm dual coil cartomizer or a 1.7-2.5 ohm single coil cartomizer. This Bolt will also work great with most tanks and clearomizers because of the side mounted magnetic switch and the 510/eGo connection on top.

• Long lasting smooth magnetic switch
• 23mm in diameter; length of about 122mm.
• Made of anodized aluminum with a texture sheen finish.
• Because of the aluminum construction we recommend dressing the threads on this unit with Noalox to prevent oxidation of the threads in the long run. Oxidation can make the threads more difficult to thread and unthread over time. You can purchase Noalox at your local Home Depot store.
• Top eGo well for your ego cartos and tanks. You can remove the outer ring completely if you wish for cleaning, etc.
• Very Lightweight 18650 3.7v mod although when fully charged your batteries may output up to 4.2v.
• Batteries and charger must be purchased separately
• Comes packaged nicely in a gift box.

SMOKTech Magnet Bolt : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[badkolo]

now those are looking hot

 

[yiddleboge6]

Wow!!!! Pretty!!!! Look at all the colors!!!!

 

[oldbikeguy]

will it work with a 18500 and a kick???

 

[Joka]

Aluminum...

 

[rdsok]

will it work with a 18500 and a kick???

The kick works with the original... the insides of this one look ( from what is shown at least ) the same more or less but it appears the inside may be painted or coated with something... if so you'd have to remove the paint/coating in order to get contact with the side pin(s) on the kick

 

[oldbikeguy]

The kick works with the original... the insides of this one look ( from what is shown at least ) the same more or less but it appears the inside may be painted or coated with something... if so you'd have to remove the paint/coating in order to get contact with the side pin(s) on the kick

Thats what I was thinking I like the colors and the price isn't bad

 

[Ahoy]

Not a bad looking device right there. Going to have to look into this a bit more, had my first hands on of the original bolt and it felt a little...lacking to say the least. Maybe this has made the right improvements


Sent from my iPhone using Tapatalk

 

[rdsok]

I still have and use two of the original Bolt's... one in Black Chrome and one all Chrome.

The Black Chrome one is a good decent mod using a standard mostly plastic horn switch... it works reliably enough. The so called Black Chrome does/did have issues and it isn't a durable finish even though the device still works just fine.

The all Chrome version is almost like a completely different quality. It has a metal horn switch and the Chrome on it is still going strong. The switch is very smooth and makes a really nice mod to use... works like "butter" ... ie silky smooth.

The price point on those ( like the newer model ) is a really good value... With the upgraded magnetic switch it should be a nice solid mod. I also wish the original had the eGo/510 connector as these do... another nice upgrade.