My fix for the Nemesis button. And how to shorten the throw.

[Three5Nines]

You will need a mouth piece cover like what you get from the vapes shops to test their juices.

Put the mouth piece on a 510 Dripping Atty, Carto, or on a gutted disposable like I 've done here.

While applying downward force, roll the end on a smooth hard surface.

We're rolling.

We're rolling.

And done.

PERFECT!

A normal Nemesis fire button. (Note the throw.)

Take out the bottom pin/contact screw.

Put the disk on the pin.

Reassemble the button. (Note the throw.)
The silicone disk acts and a spacer and a friction washer.
The throw has been reduced to about half.
You can finger tighten the pin, and it will not come lose.
If you decide you want to go back you can. No permanent modifications to the Nemesis have been made.




Forbear the utilization of voluminous expression when diminutive assertion will suffice.

 

[alternatifer]

Thank you,.I'll definitely try this

 

[Juiceinator]

Awesome. I have a magneto and the throw is ridiculous, its one of my two complaints. This looks like itll work on the magneto pin also and if it doesn't at least i can find a rubber piece that will fit it.

 

[azndrifter]

For me I just ended up using 3 magnets ever since I got rid of the spring my swich is so smooth if I'd like to adjust the switch i remove magnets or add more. 3 magnets I find is the best set up. But this is an innovative an inexpensive way to adjust the throw. good Job

Sent from my SM-N900W8 using Tapatalk

 

[gpjoe]

For me I just ended up using 3 magnets ever since I got rid of the spring my swich is so smooth if I'd like to adjust the switch i remove magnets or add more. 3 magnets I find is the best set up. But this is an innovative an inexpensive way to adjust the throw. good Job

Sent from my SM-N900W8 using Tapatalk

Me too. I had to use three to keep it from firing with my heavier atomizers. The shortened throw was a bonus.