In the upcoming days folks who are accustomed and very knowledgeable in the use of cartomizers will be receiving their test models to report their findings to help us focus in certain aspects to enhance the experience.
The beta models have been designed by us and the internals are from here in the good ol' US leaving only the shell and 510 connection being manufactured by the factory, the rest is just assembled. By personal testing and creating, I think we may of hit the mark but as always, a successful product should take more than just the creator's opinion. In the past this theory has been proven time and time again and without you guys including your opinions, love and support IKV wouldn't be where it is today. Meaning it's a cornerstone of ours to listen to our customers' feedback and ideas and try to bring them to fruition.
Project Platinum:
We have worked very hard on these models not only to revive the infamous Platinum cartomizer but to enhance it to todays standards. To thrive in the current vaping market that has been flooded with so many advances with the key features in mind for simplicity and high performance.
The current testing batch are unpunched versions with a new nonflammable batting to ward against scorching while retaining to be organic.
The coils are also new, the material's key is to sustain known liquids that cause deterioration, have the ability to be self cleaning and deliver a high end performance. The solder is also perfect to keep the current at its purest without over burdening the coils.
We have installed a food grade grommet just underneath the white mouthpiece, this extra component is made to prevent e-liquid from flooding into the users mouth for security. Please feel free to remove it if desired. Just let us know if you find this component worthy or hindering. This is where the simplicity comes into effect. The goal is to allow the user to fill/refill the cartomizer using the bottom fed method by filling the existing cap and pressing the bottom of the Platinum cartomizer into the created pool. They are rated at 2.5Ω to give you the best range in applied current.
The reason for the models being unpunched is to apply as much as stress as possible on the internal components in a small closed environment relying on only 3 sources for ventilation basically the unpunched version will be testing not only the coils and how they react to the enclosed space but the battings' absorbency and delivery without an external source of liquid.
Testers, we have supplied 5 of each for you to play around with to give you guys more freedom such as punching a few of them, or using them on a bottom fed device etc Please use liquids exclusively.A good example would be if you are using cinnamon, please use it on only one cartomizer rather than all of them. This would keep isolating issues (if any were to arise) much easier.
For obvious reasons, I cannot go into specifics on fine details as much as I would love to because in this thriving market we have to protect ourselves without patents though it is difficult not too. The innovations on these is overwhelming and honestly I just want to shout it all out.
The beta models have been designed by us and the internals are from here in the good ol' US leaving only the shell and 510 connection being manufactured by the factory, the rest is just assembled. By personal testing and creating, I think we may of hit the mark but as always, a successful product should take more than just the creator's opinion. In the past this theory has been proven time and time again and without you guys including your opinions, love and support IKV wouldn't be where it is today. Meaning it's a cornerstone of ours to listen to our customers' feedback and ideas and try to bring them to fruition.
Project Platinum:
We have worked very hard on these models not only to revive the infamous Platinum cartomizer but to enhance it to todays standards. To thrive in the current vaping market that has been flooded with so many advances with the key features in mind for simplicity and high performance.
The current testing batch are unpunched versions with a new nonflammable batting to ward against scorching while retaining to be organic.
The coils are also new, the material's key is to sustain known liquids that cause deterioration, have the ability to be self cleaning and deliver a high end performance. The solder is also perfect to keep the current at its purest without over burdening the coils.
We have installed a food grade grommet just underneath the white mouthpiece, this extra component is made to prevent e-liquid from flooding into the users mouth for security. Please feel free to remove it if desired. Just let us know if you find this component worthy or hindering. This is where the simplicity comes into effect. The goal is to allow the user to fill/refill the cartomizer using the bottom fed method by filling the existing cap and pressing the bottom of the Platinum cartomizer into the created pool. They are rated at 2.5Ω to give you the best range in applied current.
The reason for the models being unpunched is to apply as much as stress as possible on the internal components in a small closed environment relying on only 3 sources for ventilation basically the unpunched version will be testing not only the coils and how they react to the enclosed space but the battings' absorbency and delivery without an external source of liquid.
Testers, we have supplied 5 of each for you to play around with to give you guys more freedom such as punching a few of them, or using them on a bottom fed device etc Please use liquids exclusively.A good example would be if you are using cinnamon, please use it on only one cartomizer rather than all of them. This would keep isolating issues (if any were to arise) much easier.
For obvious reasons, I cannot go into specifics on fine details as much as I would love to because in this thriving market we have to protect ourselves without patents though it is difficult not too. The innovations on these is overwhelming and honestly I just want to shout it all out.