Origen Little 16 BF Atty

[Spydro]

Some Reonaughts will start getting pre orders of these atty's in hand Friday. So thought it would be a plus to get a thread going on them for posting reviews, builds and pictures to share with those who might be interested in them.

At the vendors I found that were offering them on pre orders, the price varied from $85 EUR ($94.76) to 15,574 Yen ($129.80) plus shipping. I ordered my 2 from a US vendor for $99 each plus $6 for priority shipping. Found another US vendor that has them listed as "coming soon", but with no price quoted.

Specifications:
Stainless steel BF pin
Diameter: 16mm
Height: 17,3mm
Weight: 15gr
Airflow control: 1.2mm – 2,0mm – 1,5mm - 2,5mm for dual or single coil use.
Spares: o-ring, one grub screw for the "-" pole, one grubscrew for the "+" pole, hex key

The package includes one mouthpiece (to use as an drip tip and heat protection for metallic drip tips), and one brass non BF pin (for plain dripping mode).

Size comparison to Atomic (RM4) and Origen V3.

Mine will get builds late Friday night... so I'll try to post pictures and thoughts by sometime Saturday.

 

[Rob.Gee]

Look forward to hearing your thoughts on this coil looking little atty

 

[JamezC]

Looks pretty sweet, I've always loved the origen. If it weren't for my preference towards top air 22mm attys I'd pick one up. I look forward to seeing everyone's impressions, though.

Sent from my Z998 using Tapatalk

 

[DoubleDZA]

Man I want one so badly

 

[plewm]

i'm wondering how a single coil would be mounted on this..

on the side or on top of the posts... they look pretty high up.

 

[inswva]

That thing is going to be a flavor machine. And, anything made by Norbert is going to be super high quality. This may be my first 16mm atty.

 

[Spydro]

i'm wondering how a single coil would be mounted on this..

on the side or on top of the posts... they look pretty high up.

From it's looks I'd suggest it was designed to run the coils on the sides of the posts, mounted either horizontal or vertical. Also there looks to be enough room to do a single Z coil between the posts depending on the form size it's wrapped on. Until in hand there is no way of knowing how much clearance there is between the top of the posts and the top cap. If there is room and I wanted to run a single coil I'd opt for a high center parallel coil. My plan is to do a dual vertical on the sides as my first build in one of them (like pic below). If there is room for it maybe a high center parallel in the other one as it's first build.

 

[muzichead]

#98 & 99 were delivered today. Very nice quality atty and after a few minutes and a couple attempts to coil one, i got one up and running. I would say with the largest holes open it is about the same as the Nuppin' wide open air wise. Exceptionally easy to squonk and it drains completely. I will post pics of the build in a while.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Spydro]

^^^ ^^^

Mine are out for delivery today, SB within the next 2 hours. But it'll be late tonight before I go to the mail place to get them most likely. Do have the coils already wrapped for them...

 

[AngiBe]

Anticipation regarding, flavor/vapor is killin me on this one!!!

 

[muzichead]

So I've had a chance now to get both up and running. Both have matching 26g Ni80 6/7 wrap 2.5mm .4 duals in them. I would say this atty is very much on par with the Nuppin'. It runs just a little hotter and I think thats due to the size being 16mm. I would say the flavor is a notch better and vapor is about the same. Overall I think I am very satisfied with them so far and will be ordering a couple more. Here's a couple more pics.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Rob.Gee]

That looks really cool. I must have one, as you already know.

#98 & 99 were delivered today. Very nice quality atty and after a few minutes and a couple attempts to coil one, i got one up and running. I would say with the largest holes open it is about the same as the Nuppin' wide open air wise. Exceptionally easy to squonk and it drains completely. I will post pics of the build in a while.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Train2]

Kind of reminding me now of an Atomic... the airflow "ring" and all. But, of course a 2-poster, and a bigger hole. Have you got an Atomic?

Also, I think one thing I like about Nuppin's is that the air-slot is high, and I never get a leak unless I am brain-dead and squonk over and over without vaping. Can't tell, but this looks more typical, with airhole at about post-hole height...so...any leaking out the holes?

 

[muzichead]

Kind of reminding me now of an Atomic... the airflow "ring" and all. But, of course a 2-poster, and a bigger hole. Have you got an Atomic?

Also, I think one thing I like about Nuppin's is that the air-slot is high, and I never get a leak unless I am brain-dead and squonk over and over without vaping. Can't tell, but this looks more typical, with airhole at about post-hole height...so...any leaking out the holes?

I had an Atomic a while back and I think its reminiscent of it only in the air holes only. I remember the Atonic having the air holes just over the deck and below the post holes... The air flow on this is right at about post hole high maybe just over. I was worried about leaks originally because this is very similar to the Stumpy's that Tom from CAM had modded and the one I had didn't drain well at all and I had nothing but leaking problems with it. Needless to say it lasted about 3-4 days here and it was on its way to a new home via the classies... So far no leaking with these at all. They drain very well as I posted earlier. Better than the Stumpy did, IMO... I am diggin' them so far.

 

[AngiBe]

So I've had a chance now to get both up and running. Both have matching 26g Ni80 6/7 wrap 2.5mm .4 duals in them. I would say this atty is very much on par with the Nuppin'. It runs just a little hotter and I think thats due to the size being 16mm. I would say the flavor is a notch better and vapor is about the same. Overall I think I am very satisfied with them so far and will be ordering a couple more. Here's a couple more pics.

Sent from my SAMSUNG-SM-G900A using Tapatalk

Thanks for the info!!!! "Muzic" to my ears ...warmer vape and flavor!!!! You dont' happen to own a Chalice do ya? If so, can you compare this to that?

 

[muzichead]

Thanks for the info!!!! "Muzic" to my ears ...warmer vape and flavor!!!! You dont' happen to own a Chalice do ya? If so, can you compare this to that?

No Chalice here... I think those are for tootle puffer's iirc... I do like me some airflow most of the time. This does have 4 different size holes to choose from and the smallest is quite restrictive...

 

[AngiBe]

No Chalice here... I think those are for tootle puffer's iirc... I do like me some airflow most of the time. This does have 4 different size holes to choose from and the smallest is quite restrictive...

Hey! You call'in me a tootie puffer??? Ok, I don't even know what that means


ETA...ok... Since no one helped me out, I had to look up this tootie or tootle puffer thing. LMAO! UMMMMM...no, not all Chalice users are Tootie puffers. I vape my Chalice II @ .60Ω and my Chalice III @ .50Ω.

 

[coaldriller]

[HASHTAG]#107[/HASHTAG] arrived, and is being dressed up as we speak


Sent from the land of squonking [emoji631]

 

[SteamStack]

Have to ask.. but does one need to use the white tip just to use a normal 510 drip tip?

 

[coaldriller]

Have to ask.. but does one need to use the white tip just to use a normal 510 drip tip?

No, you can use any drip tip you desire, or use any drip tip on top of the supplied mouth piece.


Sent from the land of squonking [emoji631]