I've done all kinds of builds on my Nuppin's... with K1, Ni80, ribbon, 2x/3x twisted, Clapton in various gauges; single, dual, std HC parallel, mixed gauge HC parallel, etc; mostly using 3mm RxW or Scottish Pulled 'N' Rolled wicks. My favorite for flavor rich vapor are the high center parallel builds with SR or RxW, followed by a dual something with a 3mm form for SR cotton or RxW.
I've only taken one Nuppin' build picture, of one of my V2's on a 2015 Woodvil. This high center std parallel is 27 K1, 2.5mm form that nets .6 for the joose it runs with a pulled 'n' rolled cotton wick. Don't try to run one even close to this high without measuring everything exact with a dial caliper. Just high enough to barely clear the positive post grub is way safer without some tricks I figured out with mine (and esp with the V2's "floating chamber size" like this one is).
Somewhere in this thread I wrote about all the skeletons in this closet, and how I safely got around them. I don't know how far back, probably late summer/early fall last year. Good idea to find/read it beforehand.