Genesis Atomizer Tank

[mrengles]

I know this info is on ECF, so much in fact it makes it hard to search.

I've missed out on the co-ops and really want to get my hands on a Genesis Atomizer tank.

Can someone point me to some open source drawing/specs so I can have a shop build (turn) a few for personal use?

I've used www.emachineshop.com before and would probably use them again.

Any other info you can provide would be awesome.

I did find some info on the Will Pro 13 and 7, but have a tough time translating for obvious reasons (I can only read/write English and google dose a poor job). Has anyone used or owned one? How do you like it?

I don't like the fact that it can only be used with an ego. I guess that could be changed since I'm going to draft them myself.

Thanks everyone. Next time I'll be sure to jump in on the community build!

-Mrengles

 

[solarisx]

Why don't you use the emachineshop design software?

 

[mrengles]

Why don't you use the emachineshop design software?

I'm going to...

 

[otrem]

read 'Scubagen mods'.

 

[Scubabatdan]

I'm going to...

Here is the ems (e-machine shop) files for the ego version:
View attachment Ego Scubagen_.zip

Hope that helps,
Dan

 

[sierra22]

there is 4 of them for sale in the classies for 120. better hurry up!

 

[mrengles]

Here is the ems (e-machine shop) files for the ego version:
View attachment 51420

Hope that helps,
Dan

Thanks!!!!!

 

[mrengles]

I found some specs and drawings on the ULRA 18650 also, I'm going to try and work something up this weekend...

I plan on using a little bit from each design, the ScubaGEN, WillPro13, and ULRA. Wish me luck.

Hopefully I'll be able to come up with a 6-8 ML Genisis Atomizer Tank. (That works, if not I'll have some fun working on it...)

Thanks again Dan!

 

[otrem]

update us wd pics and vapes later.

 

[mrengles]

update us wd pics and vapes later.

Will do...

 

[NatureBoy]

I found some specs and drawings on the ULRA 18650 also, I'm going to try and work something up this weekend...

I plan on using a little bit from each design, the ScubaGEN, WillPro13, and ULRA. Wish me luck.

Hopefully I'll be able to come up with a 6-8 ML Genisis Atomizer Tank. (That works, if not I'll have some fun working on it...)

Thanks again Dan!

The ULRA is one I would have liked to purchase, but it never went into production...

 

[mrengles]

I'm only looking to use some design aspects of the ULRA tank/atty not the circuitry.

 

[NatureBoy]

I'm only looking to use some design aspects of the ULRA tank/atty not the circuitry.

Yeah, that's actually what I meant... the circuitry wasn't something I was interested in. I just liked the tank/battery tube combo. Some Genisis attys are just too ridiculously big.

 

[mrengles]

Here are some photo's of what I worked on over the weekend. This unit is about 10MM shorter in the tank area then the ScubaGENv3.

 

[Scubabatdan]

Here are some photo's of what I worked on over the weekend. This unit is about 10MM shorter in the tank area then the ScubaGENv3.

Just a suggestion, Since you are going with a single wick, I would make the electrical connectors as close to the wick as possible. Cuts down on glowing kanthal
I.E.

Dan

 

[mrengles]

Thanks Dan.

Another forum member is selling me one of your ScubaGENv3's for cost. Look forward to trying it out.

 

[mrengles]

Dan,

Have you ever made one of these from AC aluminum? How did it hold up? Turning stainless might be a little problem for me. I don't have access to the right tools for a prototype.

 

[Scubabatdan]

Dan,

Have you ever made one of these from AC aluminum? How did it hold up? Turning stainless might be a little problem for me. I don't have access to the right tools for a prototype.

Still using the one I turned from aluminum, holds up great.
Dan

 

[mrengles]

Here are some new drawings, I've threaded the fill hole, so it can be closed with a M3 screw. The POS/NEG taps are also M3 threaded. I'm still deciding on how to wire, I might come straight up from the atty POS, and use a filler plug on one of the taps, otherwise I have some high temp nylon standoffs at my office. (My family has small military/aircraft electronics biz)

Let me know what you think.

 

[silentt]

I still haven't done anything with my scubagen3 that Dan sent. I'm too lazy but I will try to build it soon. I wish I could have someone build it for me lol

I'm probably missing a really delightful and epic vape.