I will soon be receiving an IPro and was wondering what everybody was using with their Notcig mod.
Avidvapor cisco spec 306 (510 connector). Don't forget to also get a 306 dt.
Will they work with Empire mods drip tips?
Nope. But you can get a 306 to 510 drip tip adapter at avid vaper. Then they'll take any 510/901 drip tip you prefer.
As to attys: I am pretty fond of the Cisco Spec 306, but I've really gotten hooked on the hh.357. I personally prefer the 2.0 ohm and I run it around ~4.3 or 4.4v.
I meant drip shield......
Yes. If you have an XL 306 drip tip, drip shields are fine. -- So, if you get Cisco 306's, the best deal is the two 306 atty + drip shield (and choose the XL one) for $19.99 if you don't already have a 306 XL Drip tip.
Pretty typical is a lot of people are actually happy with 8W, around 2.5 ohms/4.5V or 3 ohms/5V. You may nudge it up for some tobaccos, or just to provide a bit more kick during the day.
I used 3 ohms for months on the original Infinity and Buzz Pro, very happy, When I picked up my tank I switched to 2.5 ohm fusions, still excellent run time and I had the option to go slightly higher on BP on power, though realistically I almost never go above 10W. With my VVPV the 2.5 ohm IO6 atty was a no-brainer to me, again I stay mainly at 8W, 4.5V, will bump up or down slightly during the day.
I simply love the 2ohm DC atties from CoV. They don't do well with bottomfeeders, but dripping is heaven with them! Haven't burnt one yet and they've been in my arsenal for almost 6 months.
I simply love the 2ohm DC atties from CoV. They don't do well with bottomfeeders, but dripping is heaven with them! Haven't burnt one yet and they've been in my arsenal for almost 6 months.
Hi Caged, I have a Buzz Pro, and I run 2.5 Fusion cartos from Isaac. I never have to turn my B Pro all the way up. I think the 2.5 would give you the most flexibility.
Are you the same Caged that makes Altoid Tin Mods for Smartvapes? If so, thanks for making more. I've been watching the site for awhile, and was able to order one today. I can't wait to get it.
If you aren't the same Caged, nevermind.
My favorite atomizer is a Boge 3.0 ohm carto at 4.2v. 7 to 8 watts satisfies me just fine. If you want to develop a feel for wattage, use the chart below. Find your atomizer resistance and look at the wattage in the chart at various voltages.
Safe Power and Vaping Chart
Hi Caged, I have a Buzz Pro, and I run 2.5 Fusion cartos from Isaac. I never have to turn my B Pro all the way up. I think the 2.5 would give you the most flexibility.
Are you the same Caged that makes Altoid Tin Mods for Smartvapes? If so, thanks for making more. I've been watching the site for awhile, and was able to order one today. I can't wait to get it.
hificat101 gives some great advice: IKENVAPES attys are really amongst the best. as you have been reading on this thread, amongst the experienced vapers, IKENVAPEs, ciscos, and the hh. 357s seem to get the consensus votes in terms of best flavor, plumes of vapor production, and longevity. experiment with any of the three brandings and you will likely not be dissapointed!
hificat101, i too have been keeping an eye out for those smartvapes altoids VVs. man, i just checked the site and they are already all gone; i suppose 60 bucks for VV is a deal that cannot be missed though! still, lately with all the buzz about safe batteries and safe mods i wonder if it might not be better to stick to mods with established reputations for safety? that being said, i am always poking around these forums looking at the absolutely beautiful handmade wood mods made by independent/smaller suppliers, haha.