I am have a serious problem with my Vapeonly Mini BCC. I opened a help ticket, but decided to try posting the same info here in the hopes that someone can help me out. Anyway, here is the info:
I just got my Vapeonly BCC, and when I put it on my PureCigs Elite battery (innokin iTaste VV, 510/ego threaded) it fails to operate properly. I push the button on my battery, and it lights up, and stays lit, even after I release the button, until it gets to the 10 second safety cutoff, however it doesn't produce any vapor. When I leave the Vapeonly mounted on the battery, take the coil out of it and push and release the button, it works as expected.
It almost seems like the coil is causing a short across the batteries (2 batteries, exactly the same symptoms), and leaving them in an active state without actually heating up the coil.
Is this a defective unit, or is there some incompatibility with my batteries? I have not tried either of the other 2 coils (1.8 or 2.5) because I didn't want to open any more than I had to in case I needed to send this back. I don't know if they would produce the same symptoms or not.
Anyway, that is what I posted to the gotvapes support system.
I do have one final question, is there a "better" bottom coil clearomizer that will work with my batteries? I am currently using 808 threaded clearos with a 510 adapter, but I would prefer a nicer look, which is why I went with the ego threaded Vapeonly.
Thanks in advance for any help!
I just got my Vapeonly BCC, and when I put it on my PureCigs Elite battery (innokin iTaste VV, 510/ego threaded) it fails to operate properly. I push the button on my battery, and it lights up, and stays lit, even after I release the button, until it gets to the 10 second safety cutoff, however it doesn't produce any vapor. When I leave the Vapeonly mounted on the battery, take the coil out of it and push and release the button, it works as expected.
It almost seems like the coil is causing a short across the batteries (2 batteries, exactly the same symptoms), and leaving them in an active state without actually heating up the coil.
Is this a defective unit, or is there some incompatibility with my batteries? I have not tried either of the other 2 coils (1.8 or 2.5) because I didn't want to open any more than I had to in case I needed to send this back. I don't know if they would produce the same symptoms or not.
Anyway, that is what I posted to the gotvapes support system.
I do have one final question, is there a "better" bottom coil clearomizer that will work with my batteries? I am currently using 808 threaded clearos with a 510 adapter, but I would prefer a nicer look, which is why I went with the ego threaded Vapeonly.
Thanks in advance for any help!