HazMatt

HazMatt · Jul 5, 2013

.....
Before you take a powered draw from the atty, take a "cold" draw, without pressing the fire button. You should hear or feel a slight gurgle. You will learn how much gurgle is right, with experience.

Depending on how you draw, you can get 2-6 draws before you need to drip some more juice. Again, you will learn to feel and/or hear when you need to drip, with experience. If the flavor starts to taste a little burned, drip some more juice.

I hope this helps. Let me know if you.would like some more pointers.

HazMatt · Jul 5, 2013

Some have a primer, some do not. I only have experience with Joyetech attys and they do have primer in them.

Before I use a new atty, I blow the primer out. To do this, loosely cover the open end with a paper towel and blow through the threaded end. I blow as hard as I can a couple times. Then, roll up a corner of the paper towel and dab the excess primer out of the open end of the atty. Next, blow through the threaded end a couple more times and dab again with a new corner of the paper towel.

After blowing out the primer the atty should be ready to use. When dripping, I use a 510 to 510 sealed adapter and a drip shield. This helps prevent juice from leaking all over the place, if/when you over drip. If you are using a bridgeless atty, drip 4-6 drops of e-juice. Bridged attys usually need 6-10 drops to start....

mommafish · Jul 5, 2013

Hello there! I was serching for info on bridgless 510 attys and came across a post u made. I was wondering if u could help me out when I first get it will it have primer in it if so how do I get it out? Do I put 4-5 drops in it then fire the battery and inhale. Or do I do something else?
Thank for the help
J

Search

Search

HazMatt

Profile posts Latest activity Postings Blogs Achievements About

HazMatt

HazMatt

mommafish